UPDATE: INDEED, The US GAMES WORK, BUT YOU HAVE TO PATCH IT DIFFERENTLY, ONCE PATCHED JUST FOLLOW THE INSTRUCTIONS AS IF THEY WHERE THE JP VERSIONS.

OK, for the past two days people been struggling for making Pokemon White/Back functional on their R4 SDHC.
Today, with a special thanks to Aurionfox, and anyone else who contribited to this finding, i will be posting this tutorial with the means of helping those who haven't had any luck booting eather Pokemon White/Black on their R4 SDHC.

First of all *links to ROMS are not allowed* so don't ask.

Things you will need
1.- Pokemon Black/White rom. (Don't ask, Google is your friend).
2.- Rudolph patch for the freezes.
3.- Lunar Ips for Exp fix.
4.- Desmume emulator.
5.- PC and R4SDHC.
6.- Official kernel 1.34
7.- microSD (2g recommended) (Anything greater than 2g gave me problems, feel free to try)

First this works with a R4SDHC, but if you have another one feel free to try it. (R4SDHC Only tested)

Download bellow (it has everything you need)

1.- Get a clean pokemon white or black rom (Dont't ask)

2.- Extract the contents of Pokemon Fix R4SDHC and First use the *Patch Black Fix* or *Patch White Fix* this is for Freezes. (included on Download link)

Patch the version you want using the corresponding Patch.(In this case pokemon Black)

3.- Now use the IPS patcher for the Experience AP (Included on Download link)

Use the correct IPS patcher corresponding on your version (In this case Pokemon Black)

4.- Once patched start the games using Desmume emulator, Start the Patched rom you created and save before you get your PKMN, Once you save you can close the emulator.

5.- Copy everything that is on The *SD* folder to the root of your microSD.

6.- Copy your patched rom to your microSD.

7.- Start your DS

8.- Boot WAIO.NDS

9.- Press (B) and find then Boot woodr4dldi.nds

10.- Once that is finish, find your rom, press (Y) then (Y) again.

11.- Press ® and make sure Cheat In Game(AR) is off and Reset In Game Off, Then press (A) to save, then(A) again.

12.- Boot your rom, it should freeze with two white screens.

13.- Turn off your DS. Then ON again and boot WAIO.NDS then woodr4dldi.nds again.

14.- Find your rom again, press (Y) again, then (Y) again, but this time change your save type to 512kb. Then press (A) to save.

15.- Boot your rom, this time it will work. Play a little bit and then save. If you boot your rom again and try to load it will erase your save file. (a blue screen with letters will show). If that shows you did it right.

16.- Now Go on your PC and connect yor microSD and find your save and erase it.

17.- Now find your RAM folder in the emulator, it should have a *ROMNAME*.dsv

18.- Now copy *ROMNAME*.dsv to the same folder you have your room on your microSD and change the file extension from .dsv to .sav

If for some reason when you load the .sav file on your R4 SDHC and it gives you a black screen, try using R4 Save Converter.

Or try this save and see if it works for you. Created by Aurionfox.

http://www.fileserve.com/file/sGNdEN2

19.- Now Boot WAIO.NDS, Then woodr4dldi.nds and find your rom.

20.- Press (Y) twice and change the save type from 512kb back to *unknown/auto* then press (A) to save.

And if that doesn't work try putting 64M instead of auto/uknown. Some people claimed it worked for them.

If you did it right, it should boot and you will be able to save, gain EXP and no freezes. Enjoy

Sorry for my bad spelling, am from Mexico.

Kudos to:
Aurionfox
abel009
And anyone else who helped.

Copyright to everyone who make this possible

http://www.fileserve.com/file/grPYXSd

QUOTE

Working:
R4SDHC
N5
R4-III Upgrade

*NOTE*Note to anyone finding their character frozen when loading their save: When loading your game you'll be asked a question, select the bottom answer and then the first one. This turns off the C-Gear, if it's on you'll be unable to move.
Example:
Press No, then yes.

*NOTE*
This is what am using it a R4 SDHC. Here are some images so you guys can see it.

EDIT
I got Bored of the games all ready they are to short after beating the elite4

 

[Spider123]

Can someone who has an N5 help me? When I set it to unknown/auto it doesn't load and when I set it to anything else it doesn't detect my save. Also, what new patches are there now?

 

[Brettska]

I've been able to conclude that any R4SDHC that has "www.r4ultra.com" on the bottom of the label will not be able to run the 1.34 kernel, or the 1.25, so you can abandon hope for getting this work on your card.

 

[watertrainer]

Thanks Aurionfox, I got the Rom workind

Problem is its on NO$GBA...so I can't save, unless there is a patch, if there is can someone tell me the name of it so I can look it up?

Also, the Rom randomly crashes for no reason...any way to fix this?

 

[Aurionfox]

@Spider123 @Brettska

There is still a change to get the game working, try the new version of waio from Xenon++, it works for some flashcard and C-Gear is now fixed (i have a few problems with that but almost fully works)

@watertrainer

Try Desmume, No$GBA have a lot of problems, also the first part of the tutorial is the fix for the rom

 

[Tonydabby]

You said it works on R4 III upgrade right? But I don't get that

( I wanna play

(
I realized my R4 SDHC is R4 Ultra @@ that's why it didn't work

 

[watertrainer]

On DeSmuMe, the game loads but doesn't go pass the Pokemon Company screen and the emulator just freezes and that 'End Now' thing pops up...does it every time...is there a Patch?

 

[klaimore]

I have an R4-III Upgrade. (www.r4iiinew.com)
Does it work? I have kernel 3.11.
EDIT: Tried and it didn't work? It says it's working on the first post but it goes white screen even if I change it into 512kb save.

 

[Spider123]

Setting it to 64MB detects my save but it goes black when I load it

.

 

[Raiquiis]

Is easier to buy the game than do this. xD

 

[YamiEx]

I got run on my R4 SDHC using micro SD Kingston 4GB, in the 8GB not working.

When I went to a doctor in one of the buildings in the city
of first gym, Wi-Fi is enabled, but the game crashes.
Does anyone know what's going on?

 

[bebo1120]

I have an R4-III Upgrade. (www.r4iiinew.com)
Does it work? I have kernel 3.11.
EDIT: Tried and it didn't work? It says it's working on the first post but it goes white screen even if I change it into 512kb save.

i have the same r4 ind theres no fix yet for us

 

[NZimmer]

Hello.
I did what the tutorial says, it worked perfectly. Thanks.

However, when I tried to load my save file, I couldn't. Some random message is shown and I can't load it. Looks like my save file keeps getting corrupted.

I don't know if this is necessary, but I didn't use a clear ROM (it was patched once) and I didn't create the save file on the emulator because it kept freezing (downloaded it from 4Shared, on the 1st post and changed the file into [myrom'sname].sav).

Worked on N5 revolution/R4 III.

If anyone needs help (at least about making the woodR4 work), I THINK I can be useful. Contact: [email protected] (windows live messenger or e-mail)

 

[sacreddeep]

omg i can play now!

for all those people with problems try downloading this: http://gbatemp.net/t237398-waio-woodallinone?

just update the "_rpg" folder, "waio.nds" and "woodr4dldi.nds" and you can folllow the tutorial

I even started a new game and it worked! (no more black screens)

CAN WE GET THIS GUY A FRIGGIN' MEDAL OR SOMETHING!?

Confirmed working on a R4iSDHC Happy box from www.r4isdhc.com
v1.17b firmware.

seriously though, somebody give this guy a medal or something.

Quick edit for additional Information:
Using a 1GB sandisk

 

[Brettska]

@Spider123 @Brettska

There is still a change to get the game working, try the new version of waio from Xenon++, it works for some flashcard and C-Gear is now fixed (i have a few problems with that but almost fully works)

@watertrainer

Try Desmume, No$GBA have a lot of problems, also the first part of the tutorial is the fix for the rom

Where could i find the latest?

EDIT: Found.

 

[DarkShinigami]

i posted this somewhere else on the temp but i think it fits here as well. this will get it to work on r4's from r4i-sdhc.com(i know its really a top toy clone)

to ge pokemn black to work on r4i-sdhc.com card you need v1.25. obviously pokemon black+white (not gonna help ya) and rudolph patch(you can find the thread here http://gbatemp.net/t217811-rudolf-s-child-...n-hgss-and-b-w)

you need to dl this: http://filetrip.net/f13032-TTDS-EXT-INFO-SAV-6-30.html

put it on the rot of yourcard now wen you start up your ds with black you will see an ds file that says dstt run it you will then be on dstt firmware the settings for pokemon black is cheats off and soft rest off. leave the settings as i or pkemon black wont work. if that helped i am happy to help you.

this method will not work on the english patched rom

 

[GSDS]

Hey i have r4i sdhc red box (mark v.1.4) will this work? has it been confirmed?

 

[Abudabi]

Hello community,

i have a problem, i do all the things he has listed on in his post.

It stops to work at the 12th picture, instead of the 2 white screenes, there appears this screen: (Watch this)

(.sav, i tooked the one that was in the "R4 Save Converter" folder, and patched it with the "R4SaveConverter.exe")


please, anyone help.

PS: sorry for my bad english..

 

[FireGrey]

On DeSmuMe, the game loads but doesn't go pass the Pokemon Company screen and the emulator just freezes and that 'End Now' thing pops up...does it every time...is there a Patch?

What the!?
You can't use this method on an Emulator o.O

 

[Spider123]

With the WoodAllInOne it works perfectly on my N5, thanks

. By the way, is there a sperate patch now for the C-Gear and the Union room? The only patches I have are from the ones at the beginning of this thread.

 

[Spitu]

i have this flashcard with firmware 1.23 but don't work the game