OLED Cmd point values

[AgentJeffy]

Purple screen of death post modchip install and removal.

CMD resistor is reading 4.6kohms and one next to it is reading 35.6kohms. They both got cooked doing the hwfly didn't they?

 

[Blavla]

Try to use cables for CMP point and not the adapter provided with cheap Hwfly

 

[AgentJeffy]

Try to use cables for CMP point and not the adapter provided with cheap Hwfly

I went for broke and removed the HWFLY entirely and that's when I knew something was really wrong.

Basically, with the chip installed the switch wouldn't boot about 9/10 times. It would get stuck forever trying to find timings. Wouldn't even let me bypass into OFW either 9/10 times.

So I removed the mod and then started getting no signs of life when attempting to start the switch. I reseated all connectors and then saw I'm getting the purple screen.

That's when through searching, I found that the purple screen is most always an issue with the CMD resistor so I took the values and noticed both the CMD resistor and one next to it are off a bit.

Wondering if those readings are within tolerance or if it's enough of a difference to be causing these issues.

Thanks!

Post automatically merged: Aug 10, 2023

Bumping for visibility.

 

[MKVINS]

have you fix It? i have the same issue..