Homebrew no$gba help

[Lucasonic]

Please help, as I cannot figure out how to run DS roms on no$gba. I am using the latest version of it. Or at least someone give me a website for how to do this.

 

[spotanjo3]

It had been answered before. Maybe you should use the search button and type no$gba.

 

[Lucasonic]

I did search it and nothing came up.

 

[FAST6191]

You will need the DS bios files (one for the ARM7 and one for the ARM9).
It is legally questionable to link the bios so I am afraid you will have to hunt for this (30 seconds and the use of google were enough to draw it out). The files you want are called biosnds7.rom and biosnds9.rom. You might also want to try to dump your own: http://hp.vector.co.jp/authors/VA018359/nds/ndsbios.html

You need a copy of the firmware as well, this is a bit harder to come by online so I dumped it myself. There are a few firmware dumpers available but I used the SRAM dumper at http://www.natrium42.com/blog/?p=20 with my EZ2, I had to take it off in multiple passes and stick it back together with the copy /b command. For the record I use flashme but that made no difference.

You will also need to encrypt the secure area, while there are multiple ways to pull this off eNDcryptS ( link ) is probably the easiest right now. I stuck the all in the same directory as no$gba and fired up eNDcryptS, the roms got encrypted thus using these files commercial roms can be played.

Do not expect much though.

 

[sTo0z]

You're going to need the following to get it running:

no$gba 2.3b
eNDryptS Advanced v1.2
BIOSNDS7.ROM
BIOSNDS9.ROM

Put the BIOS files in the same directory as NO$GBA.EXE.
Put your ROM in the same directory as eNDryptS.
Run eNDryptS and make sure it successfully encrypts your ROM.
Put the ROM in your no$gba directory, run NO$GBA.EXE and load your ROM.

If the emulator can handle the game you're trying to play, there ya' go. There's a good chance it won't run as compatibility (in general) is low/medium on all DS emulators at the moment.

 

[spotanjo3]

You're going to need the following to get it running:

no$gba 2.3b
eNDryptS Advanced v1.2
BIOSNDS7.ROM
BIOSNDS9.ROM

Put the BIOS files in the same directory as NO$GBA.EXE.
Put your ROM in the same directory as eNDryptS.
Run eNDryptS and make sure it successfully encrypts your ROM.
Put the ROM in your no$gba directory, run NO$GBA.EXE and load your ROM.

If the emulator can handle the game you're trying to play, there ya' go. There's a good chance it won't run as compatibility (in general) is low/medium on all DS emulators at the moment.

You forgot one more thing. YOu need firmware.bin because above number 500 required it.

 

[dirbatua]

I did what you said and it came up failed to read data turn off power and reinsert game card, this was for digimon world and pheonix wright 1

 

[dualscreenman]

Go to the emulation options menu and mess around with the save type. Eventually one of those will be the correct save type. (There's only like 5, so don't worry

)