Yes. Just make sure the cable is a SYNC cable and not power only.Just to clarify-- a PS3 controller will work, right? I just plug it into one of the Wii's USB ports?
Yes. Just make sure the cable is a SYNC cable and not power only.Just to clarify-- a PS3 controller will work, right? I just plug it into one of the Wii's USB ports?
Thank you!Yes. Just make sure the cable is a SYNC cable and not power only.
what controller are you trying to use? are they official controllers/adaptors?fake/3rd partys?I cannot get any form of controls to work on nintendont after I start up a game. Only wiimote repsonds in the settings but not once the game is started.
Games start just fine.
I've tried the HID test tool to see if it is capturing controls and it does without issue.
Native controls are set to off.
I have placed the .ini file for switch gamecube controller in the root of my SD card (they updated on github a few days ago to support it).
I have tried several different other controllers as well and nothing works.
I have tried USBloader gx, but it doesn't work.
I have tried USB front and back.
Some youtube videos suggest that you put in the controller AFTER you start the game, but that doesn't work either... Am I doing something wrong? Tried for hours now it feels, nothing seems to work. HID to vpad on wii u works great but it doesn't transfer to vWii...
Edit: I tried a Wii U forwarder to nintendont from the program "Wii U USB helper" and I can finally use a controller in-game, but only with the Wii U gamepad, which was not the intended use. I tried to use HID to vpad but as soon as it switches to vWii, as mentioned before, it stops working with any controller (except the wii u game pad this time)
what controller are you trying to use? are they official controllers/adaptors?fake/3rd partys?
what version of nintendont are you using? are your sure the gc controller if using a wiiu gc adapter is connected on port 1 and not on port 4?
is the ori ones those that are usb?I have tried several different controllers. The one I have primarily been trying to use is the hori switch gamecube controller (the botw one specifically). I am using the latest version of nintendont. I have tried every single USB port available. I have an off-brand gamecube adapter that supports switch and regular gamecube controller (when I bought it, they claimed it to be mayflash, but lied since no branding on it). Using it on the switch gamecube controller is kind of redundant, but I have tried with it on all ports.
is the ori ones those that are usb?
also i see your issue is your using alot of fake/3rd party stuff, nintendont isnt very friendly with fake/3rd party stuff in general
if your pid vid dont match then it means nothing, there are dozens of devices, if pid/vid doesnt match then they arent coded what is your controller pid/vid?Yeah hori switch gamecube controller is USB. However, they updated the list of supported controllers on github called switch gamecube.ini
sounds like it should work.
if your pid vid dont match then it means nothing, there are dozens of devices, if pid/vid doesnt match then they arent coded what is your controller pid/vid?
your controller is obviously a different one, which means you have to make your own controller.ini you cant just swap pid/vid and hope all buttons match, so you need to manually make your own controller.ini using hidtest.Yes I have checked the pid/vid and it does not match up with the hori one. I looked up the HID config wizard on this site to "setup" an ini for my particular controller, but it did not work properly for me, some buttons did not record.
VID: 0f0d PID: 00dc it told me.
Another program called usbtreeview confirms this.
However, when I use the HID_test for the Wii, it wants it to be:
VID:0f0d PID 00c1.
Tried both, but same result. I did a setup according to the HID test, but it did nothing either... I am thinking this is not going to work
I will try again tomorrow. Just to clarify. Do you put the .ini in the root of the SD card or is it some place else? Must it be called "controller" to be detected?your controller is obviously a different one, which means you have to make your own controller.ini you cant just swap pid/vid and hope all buttons match, so you need to manually make your own controller.ini using hidtest.
works in several ways you can put the ini on the root fo the device that has the inis named controller.ini and it will be readed.I will try again tomorrow. Just to clarify. Do you put the .ini in the root of the SD card or is it some place else? Must it be called "controller" to be detected?
I'm also questioning my TV's scaler as I measure slightly wider geometry with 480i vs 480p.
Never had a problem hereADD. A. CONFIRMATION. TO. HOME. BUTTON.
THIS IS CRUCIAL.
Playing with a CC or CCP is EXTREMELY risky, because the START HOME and SELECT button are SO CLOSE. And guess what happens when you click the home button? YOUR GAME RESETS, COMPLETELY, WITHOUT ANY CONFIRMATIOM. And yes, that means that if you haven't saved in a while and accidentally press that button, yeah, you're f****d. Just because those buttons are so close.
SOLUTION?: Add a "Are you sure?" when you click the HOME button, that would help a lot.
Thanks.
ADD. A. CONFIRMATION. TO. HOME. BUTTON.
THIS IS CRUCIAL.
Playing with a CC or CCP is EXTREMELY risky, because the START HOME and SELECT button are SO CLOSE. And guess what happens when you click the home button? YOUR GAME RESETS, COMPLETELY, WITHOUT ANY CONFIRMATIOM. And yes, that means that if you haven't saved in a while and accidentally press that button, yeah, you're f****d. Just because those buttons are so close.
SOLUTION?: Add a "Are you sure?" when you click the HOME button, that would help a lot.
Thanks.
No idea, maybe i just have big hands? And the game i'm playing requires select and start buttons a lot.I'm not sure it's possible to inject overlays into the frame buffer once the game is loaded.
An alternative is to maybe require a 2 second hold of the home button, as per the power button.
But the home button is recessed into the controller to prevent this very issue from happening in the first place, and so I've never experienced it myself.
edit: is the home button not recessed enough in the CC/CCP? I am using the Wii U Pro Controller and it is sufficiently recessed to not allow any accidental presses.
Happened two times, and i've been using nintendont for 2 daysNever had a problem here