Hacking Nintendont

  • Thread starter Thread starter sabykos
  • Start date Start date
  • Views Views 10,172,737
  • Replies Replies 42,894
  • Likes Likes 194
Maybe you're just not that good at it.:rofl2:
Probably :p and sorry for late reply.

Sonic adventure 2 doesn't have widescreen hack anymore :(
the image is stretched

2 things, one, on the latest version, It appears that I can't have Sonic Adventure 2 Battle start in wide screen mode.
two, since this is running in wii mode, would it be possible to use HD texture packs?
Oh no, you used the forbidden S word, how dare you report a Sonic game? Now you aught to spend the penalty in the dungeon for eternity :'D

I'm planning on retiring my Wii soon now that I have a WiiU. Right now I've been using Dios Mios Lite which doesn't work on WiiU, so I need to make sure I've got what I need for it to work. I use a mod of CFG right now, is there a particular version I should use that works with Nintendont?
I'm on the same boat, if the games work fine for you on DM they should work fine on Nintendont, however the save system is different as Nintendont uses a similar method to that of Dolphin emulator, I believe there is a software to convert your saves from DM to Nin but I can't remember exactly, if you're using a real MC though you can just make a raw dump of it and rename it to "ninmem.raw" then set all your games to multi-MC and call it a day.

As for CFG I'm not sure if your mod supports Nintendont or not but the latest one should support it just fine, worst case senario you can always use Nintendont as a loader on its own too so there are no losses here, Nintendont also supports GC to USB adapters as well as many other controllers so you don't have to worry about not being able to plug in your GC controllers.
 
Last edited by sonictopfan,
Hello guys,
i feel like a total noob asking this. But after 1527 sites i ASK.

So i have on my vwii the latest Version of USB loader gx and Nintendont/controller.Zip.my HDD also uses ustealth. On my wiiu i also use a USB flash drive for saves and updates.

When i Start Nintendont with 2 USB devices in the wiiu it gives me a dsi error. Thats i think because of the wiiu Formates flashdrive.

When i finally load a game, my input doesnt work neither my wiiu pro controller or wiimote with nunchuck.

How do i configure it?
One time it worked with the wiiu pro controller, but since then not.

Wiimote and wiiupro controller are fake ones.

Can someone help me out?
 
Hello guys,
i feel like a total noob asking this. But after 1527 sites i ASK.

So i have on my vwii the latest Version of USB loader gx and Nintendont/controller.Zip.my HDD also uses ustealth. On my wiiu i also use a USB flash drive for saves and updates.

When i Start Nintendont with 2 USB devices in the wiiu it gives me a dsi error. Thats i think because of the wiiu Formates flashdrive.

When i finally load a game, my input doesnt work neither my wiiu pro controller or wiimote with nunchuck.

How do i configure it?
One time it worked with the wiiu pro controller, but since then not.

Wiimote and wiiupro controller are fake ones.

Can someone help me out?

Don't just say "latest version" as we don't know where you got it from and it could be years old. :)

USB Loader GX should tell you in the bottom left corner of the screen when loading which revision it is. If it doesn't it is old. Also make sure if you have it installed as a channel you're using the forwarder version (UNEO) and not the full channel (UNLR). The full channel version isn't supported anymore.

Nintendont displays its revision at the top of the screen. Nintendont also doesn't like knockoff controllers but that shouldn't be causing an exception.

Make sure your IOS58 isn't modified at all and you aren't using a custom theme for the Homebrew Channel.

The Google Code pages for both USB Loader GX and Nintendont are not active anymore because the service is shutting down. Current repositories: USB Loader GX / Nintendont
 
Last edited by GreyWolf,
@GreyWolf

I dont know, i get all the time that stupid dsi error, if i use the normal HBC (4:3) or the modded one. Its luck to have it working legit.

Can i reinstall the CFW on vwii side? Or isnt it possible
 
@GreyWolf

I dont know, i get all the time that stupid dsi error, if i use the normal HBC (4:3) or the modded one. Its luck to have it working legit.

Can i reinstall the CFW on vwii side? Or isnt it possible
dsi error is becuase of fake controllers, my fake wiiupro if i try to activate it on homebrew channel the channel gives me dsi exception so yeah.

First nintendont only supports 1 drive connected so you will have to unplug the other one, second the fake controllers 99% dont work on nintendont this is becuase as you witness the dsi expections and such its becuase those fake controllers do some crazy code and dont work like the official ones and nintendont is very hardcoded to the official ones and there is no fix for the fake controllers.

My advices- use a hid controller or get an official wiimote+CC or an official wiiupro.
 
Last edited by pedro702,
Yep it was the fake shit controller...
Bought a 1 Months old original wii u pro controller on craigslist (in germany ebay kleinanzeigen) for 20€ now everything works fine.

Thanks for your help guys
 
So, I was playing Eternal Darkness and after the final boss my game get stuck in a cutscene.
I am using a Wii and nintendont v3372, anyone else had this problem?
Oh, my ISO is uncompressed.
well like i always say

Nintendont settings please all of them and iso md5.
 
dont say default because manny people say default when they arent.

The photo is a little bad, but you can see what settings are default or not.
 

Attachments

  • 12171118_862541250511708_1277511817_o.jpg
    12171118_862541250511708_1277511817_o.jpg
    53.5 KB · Views: 170
The photo is a little bad, but you can see what settings are default or not.
i can see you have video on noone, noone isnt default btw the default is auto, see what i mean alot of people think they have default settings when they dont, but i dont think its the video fault, my guess is the width, it has been confirmed to make some games crash at some points, put the width on default and video on auto and try again i guess.
 
i can see you have video on noone, noone isnt default btw the default is auto, see what i mean alot of people think they have default settings when they dont, but i dont think its the video fault, my guess is the width, it has been confirmed to make some games crash at some points, put the width on default and video on auto and try again i guess.

Oh, my bad.
I will try to do what you say later.

Edit: It worked!
Thank you very much for The help!
 
Last edited by Luck_xD,
Cleaning up my SD card for the first time in ages -- updating emus, controller settings, deleting old sh*t, etc -- Anyway, I noticed root/apps/Ninboot.dol .. Is this a necessary file? Nintendon-t is located in the correct directory root/apps/Nintendont/boot.dol .. This is something I just noticed.

Thanks, in advance.
 
Cleaning up my SD card for the first time in ages -- updating emus, controller settings, deleting old sh*t, etc -- Anyway, I noticed root/apps/Ninboot.dol .. Is this a necessary file? Nintendon-t is located in the correct directory root/apps/Nintendont/boot.dol .. This is something I just noticed.

Thanks, in advance.
Not at all, feel free to delete this file :)
 
  • Like
Reactions: DeezTits
Cleaning up my SD card for the first time in ages -- updating emus, controller settings, deleting old sh*t, etc -- Anyway, I noticed root/apps/Ninboot.dol .. Is this a necessary file? Nintendon-t is located in the correct directory root/apps/Nintendont/boot.dol .. This is something I just noticed.

Thanks, in advance.
this isnt a nintendont file lol maybe you were experimenting with boot dols and renmaed one to that to keep there or something lol.
 
this isnt a nintendont file lol maybe you were experimenting with boot dols and renmaed one to that to keep there or something lol.
I seem to recall that file name being used by one of the loaders' updaters. It may have even been the original Nintendont updater. I have seen that filename before. I think it even appeared on my SD card once upon a time.
 
I seem to recall that file name being used by one of the loaders' updaters. It may have even been the original Nintendont updater. I have seen that filename before. I think it even appeared on my SD card once upon a time.
That was an issue from an old master mod version.
 
Hey fellow nerds!! Jesus Christ... it's been 8 months since i last posted on here!! :O Well i did sell my Wii U, then used Dolphin emulator for awhile and then just recently bought a Wii U again because i missed Mario Kart 8 and Super Mario 3D Word. Anyways i modded the vWii exactly as i've done a dozen times before and installed all the same apps i had before and i see the latest version of Nintendont runs perfectly now... all except Agent Under Fire unfortunately :(

The very same issue i was having 8 months ago with the game going either black screen or green fuzzy lines still unfortunately happens everytime i try to pass the second stage. I'm guessing it'supposed to be like that right? As in Agent Under Fire is one of the very few left that isn't running 100% perfect, right? If i'm wrong about that please tell me... however if that is correct, to be honest there's only 3 stages in this game i really like - the rest of them i couldn't give a rat's ass about.

The only reason i want this game is because those 3 stages just happen to be really really fun to play... but unfortunately you need to play every level to unlock the next one, they're not already there. Does anyone know of a way you can simply skip the 2nd stage or if you can download save files for this game from a particular site and then using some program get your console to recognize it as your save file (hope you know what i mean)?
 
Hey fellow nerds!! Jesus Christ... it's been 8 months since i last posted on here!! :O Well i did sell my Wii U, then used Dolphin emulator for awhile and then just recently bought a Wii U again because i missed Mario Kart 8 and Super Mario 3D Word. Anyways i modded the vWii exactly as i've done a dozen times before and installed all the same apps i had before and i see the latest version of Nintendont runs perfectly now... all except Agent Under Fire unfortunately :(

The very same issue i was having 8 months ago with the game going either black screen or green fuzzy lines still unfortunately happens everytime i try to pass the second stage. I'm guessing it'supposed to be like that right? As in Agent Under Fire is one of the very few left that isn't running 100% perfect, right? If i'm wrong about that please tell me... however if that is correct, to be honest there's only 3 stages in this game i really like - the rest of them i couldn't give a rat's ass about.

The only reason i want this game is because those 3 stages just happen to be really really fun to play... but unfortunately you need to play every level to unlock the next one, they're not already there. Does anyone know of a way you can simply skip the 2nd stage or if you can download save files for this game from a particular site and then using some program get your console to recognize it as your save file (hope you know what i mean)?
What version of Nintendont are you using? The latest is 3.373.
 
Last edited by ccfman2004,

Site & Scene News

Popular threads in this forum