Hacking Nintendont

[Rob Blou]

Hey guys is there a way to make the L and R buttons pressure sensitive work on a PS3 controller? Mario sunshine is really hard to play without that feature

 

[pedro702]

Oh sorry for that, no i don't think i have update Nintendon't but i install the lastest version, a normal Wii and yeah a use a loader, about Setup beside the virtual memory card don't think i've changing any of the default options

then the only option is that somehow your isos got corrupted since atleast ssbm works perfectly on 141.

 

[faku1810]

i did that and its saying the ini doesnt match the controller.. I messed up somewhere. I give up for the day lol

Open hidtest look what your pid and vid are. Then change that in your ini

 

[Rob Blou]

Sorry If any of these have been answered in the past but here are my questions:
1- Is there any way to make the L2 R2 buttons pressure sensitive feature work with a ps3 controller
2- What's the best solution for multiplayer?
3- Was anybody able to play any version of phantasy star online 1&2?
4- Is there any plans for online play sopport?
Thx!

 

[faku1810]

Sorry If any of these have been answered in the past but here are my questions:
1- Is there any way to make the L2 R2 buttons pressure sensitive feature work with a ps3 controller
2- What's the best solution for multiplayer?
3- Was anybody able to play any version of phantasy star online 1&2?
4- Is there any plans for online play sopport?
Thx!

1. Set the offset that changes as AnalogL and AnalogR. Not sure it works in sunshine though.
2. Original wii and gc controllers.
3. Idk
4. I don't think so

 

[SuperrSonic]

... here are my questions:
1- Is there any way to make the L2 R2 buttons pressure sensitive feature work with a ps3 controller
2- What's the best solution for multiplayer?
3- Was anybody able to play any version of phantasy star online 1&2?
4- Is there any plans for online play sopport?
Thx!

1- I don't use a PS3 controller but you should be able to set full click on the .ini which should make it the most compatible.
2- Wii has the option of using both GC controllers and hid controllers, with GC controllers going first, e.g. if you have two GC controllers then player three could be a hid controller.
3- Compatibility list says they turn off the console.
4- Considering the small amount of games that use it, you should just go with devo on this.

 

[Rob Blou]

Sorry guys I'm not good with this but in the controller.ini it says:
L=3,01
R=3,02
and
LAnalog=12
RAnalog=13

so what should I do exactly?

 

[faku1810]

Sorry guys I'm not good with this but in the controller.ini it says:
L=3,01
R=3,02
and
LAnalog=12
RAnalog=13

so what should I do exactly?

When you press L, one of the offsets will go from 0 to FF, count from 0 and see which pair it was. That goes in AnalogL.

When fully pressed, a different offset will change. That goes in L as Position, Value. The second number is the value it shows

 

[tswntk]

I recently purchased an SDXC 64GB Card. I know format needs to be FAT32, but which cluster size should I select?

right here: http://gbatemp.net/threads/nintendont.349258/

If you can't find the answer then read it again
if you still can't the answer then read it again....

 

[drakorex]

I recently purchased an SDXC 64GB Card. I know format needs to be FAT32, but which cluster size should I select?

16. Go with 16.

 

[elconejotres]

Guys is just me or Baten Kaitos Origins has missing music and audio? tried with several versions and same result always, is not my iso it work right with diosmios full music and sound effects/voices confused because in compatibility list appears as fully working

 

[Hugo Bruno]

First step is to update nintendont. Then try hidtest and see what happens when you press buttons at the same time

Since I upgraded to the latest version nintendont available (v1.141) and the problem with Mortal Kombat Deadly Aliance remains. I did the Hid Test and curiously, pressing the D-Pad and (A, B, X, Y) buttons simultaneously values ​​change but when playing Mortal Kombat, the game does not recognize when I push the D-Pad and buttons simultaneously.

I'm pretty sure that if I could change the control settings for the D-Pad out the joystick and the joystick was the D-Pad this error disappear Is there any way to do this?

 

[Afeohtan]

Since when was the sound fixed for Ocarina of Time? I just noticed this while trying OOT MQ. Great work devs!

 

[SuperrSonic]

Since when was the sound fixed for Ocarina of Time? I just noticed this while trying OOT MQ

Fix94 said earlier that he noticed it suddenly, and was apparently fixed blindly but I think no one noted the version that fixed it.

 

[Skeet1983]

asking this as I haven't found an answer... im using the latest usbloader gx (r1230) and the latest version of nintendont (r141). when I launch a gamecube game via usbloader gx, the options i have chosen (such as memory card emulation) do not save, and the game i have chosen does not auto-boot. instead i am prompted to choose sd/usb and to choose my game. i can also choose which settings i wish to apply this way, however they do not save.

anyone have any ideas?

I am having same problems as you. I just noticed that my options in Nintendont dont save either. Game also doesnt auto-boot through Wiiflow.

 

[MassiveRican]

Abz linked to a mod he made a few pages back if you want a WiiFlow compatible with Nintendont's config v3 so u can autoboot. Or you can wait for fix94 to officially update WiiFlow.

 

[CM_Skunk]

Open hidtest look what your pid and vid are. Then change that in your ini

The ones that are in the file are the same as the ones in HID... However theres a set of VID and PID numbers above those. Ill try those

UPDATE: I got the games to start... Meaning it recognized the controller. But i cant get past the start screen. I believe i mapped it wrong

VID=0079
PID=0006
Polltype=0
DPAD=0
Power=2,01
A=6,40
B=6,A0
X=6,20
Y=6,10
Z=7,08
L=7,04
R=7,02
S=7,20
Left=1,00
Down=2,FF
Right=1,FF
Up=2,00
StickX=1
StickY=2
CStickX=6
CStickY=4
LAnalog=12
RAnalog=13

Anyway progress was made. Ill crack on this thing again tomorrow

 

[faku1810]

The ones that are in the file are the same as the ones in HID... However theres a set of VID and PID numbers above those. Ill try those

UPDATE: I got the games to start... Meaning it recognized the controller. But i cant get past the start screen. I believe i mapped it wrong

VID=0079
PID=0006
Polltype=0
DPAD=0
Power=2,01
A=6,40
B=6,A0
X=6,20
Y=6,10
Z=7,08
L=7,04
R=7,02
S=7,20
Left=1,00
Down=2,FF
Right=1,FF
Up=2,00
StickX=1
StickY=2
CStickX=6
CStickY=4
LAnalog=12
RAnalog=13

Anyway progress was made. Ill crack on this thing again tomorrow

Next time you should check the googlecode page linked at the bottom of the first post. i already made a controller.ini for that controller (there's a bunch of them with the same VID and PID, but different brands), it's called Generic_Controller.ini; mine has different values though, so that would explain why yours is not working.

 

[Darksphere92]

anybody here know if getting an Wii 2 HDMI is worth it?

 

[Adeka]

anybody here know if getting an Wii 2 HDMI is worth it?

it's just a converter so you can plug it into the hdmi port on your tv. It still shows it in 360p/48p