I am in a bit of a pickle. Recently I was attempting to link a Nintendo account to my switch using the methods discussed in a thread on here. Before making any changes to my nand I made sure to back it up. When I made this backup I was on firmware 6.1.0. I made a number of changes but was never able to get the linked account working. So, after getting frustrated, I instead decided to create my own Nintendo account and go online for a minute to link it. I did so and immediately went offline after linking the account. After this I decided to update a bunch of homebrew apps as well. Now keep in mind this was a while ago so I do not fully remember all of the changes I made. Once I finished my updates I attempted to launch a game and it wouldn't launch due to corrupt save data (likely due to modifying my nand earlier). At this point I had been working on this for a day and decided to take a much needed break.
Cut to today. I decided to work on this again and thought back to the last day I was working on this. I figured I could just restore the nand backup and everything should be back to how it was before the changes. So I tried that, but unfortunately after the update the system no longer powers on. I can still boot into rcm and load hekate, but the system will not boot normally. I started to think back to the last day I worked on it and I cant remember if I updated firmware (I always use ChoiDujour to update) to 6.2.0. So I checked my fuses and sure enough I have 8 burnt fuses. Now I am not sure what to do, I figured I should attempt to downgrade and found some threads saying that was not possible. Then I found a website showing how to downgrade manually with choidjuour, but I am not sure if that will even work now that I have restored. Just looking for some guidance on whether or not its possible to resurrect this thing.
In short I have a nand backup from 6.1.0. I have 8 burnt fuses. My switch will only boot into RCM after restoring said nand backup. At this point I am unsure what to do and am looking for some guidance.
Thanks in advance for any help that you can provide.
Cut to today. I decided to work on this again and thought back to the last day I was working on this. I figured I could just restore the nand backup and everything should be back to how it was before the changes. So I tried that, but unfortunately after the update the system no longer powers on. I can still boot into rcm and load hekate, but the system will not boot normally. I started to think back to the last day I worked on it and I cant remember if I updated firmware (I always use ChoiDujour to update) to 6.2.0. So I checked my fuses and sure enough I have 8 burnt fuses. Now I am not sure what to do, I figured I should attempt to downgrade and found some threads saying that was not possible. Then I found a website showing how to downgrade manually with choidjuour, but I am not sure if that will even work now that I have restored. Just looking for some guidance on whether or not its possible to resurrect this thing.
In short I have a nand backup from 6.1.0. I have 8 burnt fuses. My switch will only boot into RCM after restoring said nand backup. At this point I am unsure what to do and am looking for some guidance.
Thanks in advance for any help that you can provide.