Hacking Need Help With Getting Configurable USB Loader to Work

[Sakura_Martinez]

I have been using this particular loader for a couple of weeks, though I was using an outdated version. Then, today, I ended up updating the loader. Now, I can't play any of my backup games from the USB. It keeps getting me the error message that says:

IOS(249) .....
IOS Reload: Blocked
ERROR: setting up fragments -2 4
ID Mismatch: [RBIEE9] []
ERROR: SetWBFS: -3

(The above is while I'm trying to play Harvest Moon: Animal Parade, which I was able to play before I ended up updating)


My Loader Version is 70r65

I have the following CiOS setup (according to the loader):
IOS202[60] (rev 65535, Info: hermes-v5.1)
IOS222[38] (rev 65535, Info: hermes-v5.1)
IOS223[37] (rev 65535, Info: hermes-v5.1)
IOS224[57] (rev 65535, Info: hermes-v5.1)
IOS245[37] (rev 21007, Info: d2x v7final)
IOS246[38] (rev 21007, Info: d2x v7final)
IOS247 : not installed
IOS248: not installed
IOS249[58] (rev 21007, Info: d2x v7final)
IOS245[57] (rev 21007, Info: d2x v7final)
IOS251: not installed

Any help regarding this will be greatly appreciated.
THank you.

 

[SomeWeirdSin]

Try installing cIOS rev19. I don't know from personal experience, but I read on a separate thread that someone with the same problem did this and it worked. Here is the link so you can check it out too.

http://gbatemp.net/threads/configurable-usb-loader-problem.243436/

I hope this fixes it!

 

[Sakura_Martinez]

Thanks. It worked.
But is it alright to leave the other IOS's blank with nothing installed on them?
I'm thinking of playing Xenoblade Chronicles and am wondering if, with the setup I have, it would work.

 

[SomeWeirdSin]

Thanks. It worked.
But is it alright to leave the other IOS's blank with nothing installed on them?
I'm thinking of playing Xenoblade Chronicles and am wondering if, with the setup I have, it would work.

I recommend cIOS249 d2x base56 and cIOS250 d2x base57. These will allow you to load virtually all wii games from your usb HDD.