Hardware N3DS micro sd card reader broken?

[gusch]

Hello.
So my problem is that my N3ds can't read the micro sd card anymore. I disassembled my 3ds to fix the NFC and after that my micro sd card doesn't work. Now i can't start my 3ds. When the sd card is in and if i turn it on, the screens stay black and the blue light and if i boot the 3ds without the sd card then this error comes:
An error has occurred: Failed to apply 1 Firm patch(es).
Press any button to shutdown.
i can acces Godmode9, Luma configuration but without the sd card in it!
My sd card is fine. I really hope the sd card reader is broken and not the connction on the mainboard.
If you have any tips pls help me!

 

[IC]

Try taking the 3DS apart again and reconnect the microsd card reader

 

[Robika]

Hey there!
Bad luck ma men!
Here what you can do! Look onto the slot if you can and see if any pins are bent, this happened to my EZ Flash IV on the GBA and I was able to fix it. Also if you have compressed air spray or something you can give it a blow but after that let it dry a little since the sprays always come with some water in them.
Other than that re-solder the connector or a new one.
Good luck and don't...fuck it up!

 

[Hayato213]

If reconnecting the SD card adapter to the board doesn't work, you can try to get a replacement one on ebay.

 

[gusch]

Try taking the 3DS apart again and reconnect the microsd card reader

I did but with no success

--------------------- MERGED ---------------------------

Hey there!
Bad luck ma men!
Here what you can do! Look onto the slot if you can and see if any pins are bent, this happened to my EZ Flash IV on the GBA and I was able to fix it. Also if you have compressed air spray or something you can give it a blow but after that let it dry a little since the sprays always come with some water in them.
Other than that re-solder the connector or a new one.
Good luck and don't...fuck it up!

Yeah spray didn't helped either
If i have to solder it iam fucked up haha.
Here some pictures of the connection:

The connection on the board


The sd card reader connection.

--------------------- MERGED ---------------------------

If reconnecting the SD card adapter to the board doesn't work, you can try to get a replacement one on ebay.

Yeah I ordered one today. I hope it will work.

 

[Hayato213]

Did any soldering ?

 

[gusch]

Did any soldering ?

No and i wish i dont have to do something like that haha ^^

 

[Hayato213]

No and i wish i dont have to do something like that haha ^^

I asks to see if you if did any solder to see if you accidentally damaged via soldeirng.

 

[gusch]

I asks to see if you if did any solder to see if you accidentally damaged via soldeirng.

nono nothing like that.

 

[Hayato213]

nono nothing like that.

Can you change the photos to regular size not full size, harder to see if it full size.

 

[gusch]

Can you change the photos to regular size not full size, harder to see if it full size.

i edited it. i hope its better now.

 

[Hayato213]

Your connection looks fine, so probably just the adapter since you never done any soldering, the contact point doesn't look burned.

--------------------- MERGED ---------------------------

Your connection looks fine, so probably just the adapter since you never done any soldering, the contact point doesn't look burned.

Did you check that the cable of the adapter is connected to the board when attempting to connect it?

 

[TurdPooCharger]

Your SD reader looks fried.

 

[gusch]

Your connection looks fine, so probably just the adapter since you never done any soldering, the contact point doesn't look burned.

--------------------- MERGED ---------------------------



Did you check that the cable of the adapter is connected to the board when attempting to connect it?

Yes of course.

Your SD reader looks fried.

This isn't the board.

 

[Robika]

I did but with no success

--------------------- MERGED ---------------------------



Yeah spray didn't helped either
If i have to solder it iam fucked up haha.
Here some pictures of the connection:
View attachment 139763
The connection on the board

Looks good to me!

 

[TurdPooCharger]

This isn't the board.

Okay, then what is it that's in the area boxed in red?

 

[gusch]

Okay, then what is it that's in the area boxed in red?

I think this is foam.

 

[TurdPooCharger]

View attachment 139834

I think this is foam.

I see where the foam comes from now. If you come to the conclusion your current SD card reader needs to be replaced, here you go.

• [aliexpress] SD Memory Card Tray Slot Holder Flex Cable Replacement For Nintendo New 3DS
• [eBay] Card Reader SD Card Slot Card Holder Socket Replacement for Nintendo NEW 3DS

 

[gusch]

I see where the foam comes from now. If you come to the conclusion your current SD card reader needs to be replaced, here you go.

• [aliexpress] SD Memory Card Tray Slot Holder Flex Cable Replacement For Nintendo New 3DS
• [eBay] Card Reader SD Card Slot Card Holder Socket Replacement for Nintendo NEW 3DS

I already ordered one but thanks anyways.

 

[Xalusc]

and if i boot the 3ds without the sd card then this error comes:
An error has occurred: Failed to apply 1 Firm patch(es).
Press any button to shutdown.

You probably didn't update Luma on the CTRNAND. That's easy to fix.
About the SD, try inserting it on your PC with a microSD to SD adapter and see if your PC can read it.