Tutorial Modify ANY Wii 4.3 & below

[cadoret]

Hi ,
followed your guide exactly, everything seemed to go fine, until after i installed priiloader, installed as instucted, done the system hacks, then when rebooted wii, all i get is a black screen witth 4.2 (eur) in the bottom right corner, help

 

[Porobu]

Hi ,
followed your guide exactly, everything seemed to go fine, until after i installed priiloader, installed as instucted, done the system hacks, then when rebooted wii, all i get is a black screen witth 4.2 (eur) in the bottom right corner, help

did you activate the hack recovery menu
go to priioader (press RESET while booting) and turn it off

 

[cadoret]

Hi, thanks for that, worked fine, thought i'd done something wrong, thought it was bricked.
the only problem now though is, it wont recognise my hard drive, i dont think its the hard drive as it works on my other wii.
any way thanks for your help much appreciated

 

[Porobu]

Hi, thanks for that, worked fine, thought i'd done something wrong, thought it was bricked.
the only problem now though is, it wont recognise my hard drive, i dont think its the hard drive as it works on my other wii.
any way thanks for your help much appreciated

What USB Loader are you using?
Is your HD Formatted in FAT32

 

[cadoret]

universal usb gx, formatted in fat 32, and then wbfs formatted, as i said earlier it works fine on my other wii,
but not on this one,

 

[Porobu]

universal usb gx, formatted in fat 32, and then wbfs formatted, as i said earlier it works fine on my other wii,
but not on this one,

Try using Configurable USB Loader or WiiFlow

 

[cadoret]

ok m8 thanks for all your help ,i'll try one of them, which one would you say is the best.



TRIED WIIFLOW AND NOW EVERYTHINGS NOW WORKING FINE, ONCE AGAIN THANKS FOR ALL YOUR HELP, GREAT GUIDE -GREAT SITE

 

[Porobu]

ok m8 thanks for all your help ,i'll try one of them, which one would you say is the best

try using CFG

 

[DespizingU]

Required
- SD card [preferably non-sdhc] with around 700mb free [600mb for NAND backup, 100mb everything else]
- PC with internet connection & SD card reader.
- Wii [to mod]
Game only required if on 4.3 firmware.
- Super Smash Brothers Brawl, US/Japanese Wii's ONLY.
- Lego Indiana Jones, US/Europe Wii's ONLY.
- Yu-Gi-OH 5D's Wheelie Breakers, All Wii's.

-Erik

So the actual game is needed? Thanks for the response.

 

[brausm08]

if you're on 4.3, then yes. rent, borrow, buy: it's your choice....

Indiana Pwns is the exploit within the game LEGO Indiana Jones. the exploit requires the files the guide provides.

 

[andrewcha]

sorry to ask this here as I can't find anything. Having a 003 error. bottom is 4.3J. autoboot with BootMe no luck. not sure if I'd cioscorp installed as I have a old modchip (d2ckey) but before that i can use gecko to reboot into disc channel to play games. appreciate you attention. Thank you.

 

[Al_Yahud]

Thanks guys. Just modded virgin 4.3u black wii using your latest files/instructions. It couldn't have been easier.

 

[burritoboy9984]

sorry to ask this here as I can't find anything. Having a 003 error. bottom is 4.3J. autoboot with BootMe no luck. not sure if I'd cioscorp installed as I have a old modchip (d2ckey) but before that i can use gecko to reboot into disc channel to play games. appreciate you attention. Thank you.

Did you follow this guide? Do you have a J console? Do you have priiloader installed? (If so, hold reset while starting the wii up, and disable recovery mode).

-Erik

 

[Al_Yahud]

Erik:

I see on the downloads there is now a new download called 42modman zip and 43 modman zip, in addition to the 42mod and 43mod files. Can you please tell me what the difference is?

Thanks....

 

[LxTrix]

So this new method of using YAWM Multimod Batch to update to 4.2 makes me nervous. It asks what ios you want to use and you dont say which. I tried the default it was set to which was 30. It failed to install the last wad. So ya i'm going to update with MMM. Which two wads do i need to install first, i forgot and you no longer have that listed here.

 

[burritoboy9984]

Erik:

I see on the downloads there is now a new download called 42modman zip and 43 modman zip, in addition to the 42mod and 43mod files. Can you please tell me what the difference is?

Thanks....

42modman is for people having issues for one reason or another with the modified batch installer. This won't fix their issues, but it will show them why it isn't working (most likely because the ios236 installer was skipped or didn't complete.

QUOTE(LxTrix @ Dec 12 2010, 04:05 PM) So this new method of using YAWM Multimod Batch to update to 4.2 makes me nervous. It asks what ios you want to use and you dont say which. I tried the default it was set to which was 30. It failed to install the last wad. So ya i'm going to update with MMM. Which two wads do i need to install first, i forgot and you no longer have that listed here.

It uses ios36 to install all the 4.2 wads (not 30). It will install the system menu AFTER the ios70 so it will be fine. The last wad is the wii shop channel.

-Erik

 

[Al_Yahud]

Thanks!

 

[andrewcha]

sorry to ask this here as I can't find anything. Having a 003 error. bottom is 4.3J. autoboot with BootMe no luck. not sure if I'd cioscorp installed as I have a old modchip (d2ckey) but before that i can use gecko to reboot into disc channel to play games. appreciate you attention. Thank you.

Did you follow this guide? Do you have a J console? Do you have priiloader installed? (If so, hold reset while starting the wii up, and disable recovery mode).

-Erik

Previously mine was a J consoles, Mobo died then change to Korean Mobo. Cause mine using d2ckey (backup works flawlessly in 3.1J) so I accidentally updated via disc channel. Yes previously holding reset button will do the trick but now after error 003 comes out only using GC D-pad can pop me up into 4.3J at the right corner area. So now only my backup and retail Japanese games will spin (not other regions), but when they spin the screen only gives me black screen. Is that means that my modchip doesn't do the trick cause when I look around Youtube and other tuts after they pop in a disc (retail or backup) they still can play the games. Any suggestions for my case? I'm not sure if my IOS 36 has been 'trucha bug' or not. All I know now is my console only can revive via disc-loading. It might be cruel to give up my save data as well. Thanks.

 

[wrecklessmusic]

Greetings,

So my wife and I finally decided to take the dive and install Homebrew on our virgin 4.3u Wii. We rented the Lego Indiana Jones game from the local video store, came home, formatted a 2GB SD card, loaded the Indiana Pwns save game and the boot.elf on the root of the card. We got the saved game to load, went to the art room, viewed the character, selected the icon, and got the buffer override to work. Basically we got all the way to the point where we select to install Homebrew, then we get an Exception (DSI) occurred error. We tried several times and keep hitting the same problem. Could it just be that we need to use a different SD card? That's the only thing I can think of. The install just doesn't seem to work for us. Anyone have any ideas?

Posts merged

Oh, and thanks so much for your guide.

 

[burritoboy9984]

sorry to ask this here as I can't find anything. Having a 003 error. bottom is 4.3J. autoboot with BootMe no luck. not sure if I'd cioscorp installed as I have a old modchip (d2ckey) but before that i can use gecko to reboot into disc channel to play games. appreciate you attention. Thank you.

Did you follow this guide? Do you have a J console? Do you have priiloader installed? (If so, hold reset while starting the wii up, and disable recovery mode).

-Erik


Previously mine was a J consoles, Mobo died then change to Korean Mobo. Cause mine using d2ckey (backup works flawlessly in 3.1J) so I accidentally updated via disc channel. Yes previously holding reset button will do the trick but now after error 003 comes out only using GC D-pad can pop me up into 4.3J at the right corner area. So now only my backup and retail Japanese games will spin (not other regions), but when they spin the screen only gives me black screen. Is that means that my modchip doesn't do the trick cause when I look around Youtube and other tuts after they pop in a disc (retail or backup) they still can play the games. Any suggestions for my case? I'm not sure if my IOS 36 has been 'trucha bug' or not. All I know now is my console only can revive via disc-loading. It might be cruel to give up my save data as well. Thanks.

I got no ideas on a way to fix... Try making a new topic in the wii hacking forum, it will get more views, and perhaps more ideas...

-Erik

QUOTE(wrecklessmusic @ Dec 12 2010, 05:27 PM)

Greetings,

So my wife and I finally decided to take the dive and install Homebrew on our virgin 4.3u Wii. We rented the Lego Indiana Jones game from the local video store, came home, formatted a 2GB SD card, loaded the Indiana Pwns save game and the boot.elf on the root of the card. We got the saved game to load, went to the art room, viewed the character, selected the icon, and got the buffer override to work. Basically we got all the way to the point where we select to install Homebrew, then we get an Exception (DSI) occurred error. We tried several times and keep hitting the same problem. Could it just be that we need to use a different SD card? That's the only thing I can think of. The install just doesn't seem to work for us. Anyone have any ideas?

Posts merged

Oh, and thanks so much for your guide.

Where are you getting the code dump? And could you please post a syscheck?

Thx
-Erik