Most people place it onto the metal shield above the CPU/GPU/RAM and everything (but you probably have to remove the big metal shielding plate).
I personally put it onto the battery.
You'd probably have re/move the restart button.
I personally put it onto the battery.
You'd probably have re/move the restart button.
Last edited by Kubas_inko,
Some people put in on the shield above the RAM, but if requires cutting the shield that you remove to expose the motherboard.
If you are not a friend of cutting shields, you can put it on the actual motherboard shield below the fan.
There are several holes where you can put the cables through.
If you are not a friend of cutting shields, you can put it on the actual motherboard shield below the fan.
There are several holes where you can put the cables through.
I saw a trinket m0 setup that this person did good. he got to keep his heat shield intact. he put wires thru the fan holes and other area.
he was able to put his clear purple back shell on. I really like his trinket m0 setup. I will try to get pic of it later.
his trinket m0 was under the fan area like most people have it sitting.
he was able to put his clear purple back shell on. I really like his trinket m0 setup. I will try to get pic of it later.
his trinket m0 was under the fan area like most people have it sitting.
Last edited by ELY_M,
On the picture, he has to push everything. He has only 4 wire setup, so he has to enter RCM manually. Or he simply uses autoRCM with atmosphere, which is the best thing ever.
More important thing is that it will turn off when you turn it off if you use ams.
If you have modchip installed, it will automatically boot once it is in RCM.
Depends. You can use mattys prebuild uf2 files with modified Hekate, or you can flash it your self with any payload you want using arduino.
Similar threads
- Question
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
@
Veho:
It's not like they're complaining that their Slurpee is 99% ice or something, but if the cocktail calls for "shot of vodka, shot of vermouth, shot of gin, shot of Campari, three shots of juice, squirt of lemon" and ends up being a thimbleful of booze, that's a problem. -
@
The Real Jdbye:
the funny thing is cocktails in norway are only allowed to have 1 20ml shot of booze
-
-
-
-
-
@
The Real Jdbye:
but you could buy as many shots of whisky (or anything else) as you want and ask for a glass of ice and pour them in
-
-
-
@
Veho:
There was a comparison of the number of Ibuprofen poisonings before and after they limited the maximum dosage per box or per pill (i'll look that up). No limit on the number of boxes you can still buy as many as you want, so people argued it was pointless.
-
@
Veho:
But the number of (accidental) poisonings dropped because drinking an entire package of ibuprofen pills went from "I need a new liver" to "I need a new box of Ibuprofen".
-
@
Veho:
Here we have ketoprofen that used to be prescription-only because of the risk of toxic dosages, but then they halved the dose per pill and sell them in bottles of six pills apiece instead of twenty and it doesn't need a prescription any more. Yes you can buy more than one bottle but people simply don't.
-
@
Psionic Roshambo:
Usually accidentally overdose of ibuprofen here is from people taking like cold medicine then ibuprofen for a headache and the combination is over what they need -
-
