Hacking Issue with SafeA9LHInstaller

[Dave_Chad]

Hi all i have modded about 7 3ds so far without issues. Got a friends here that I'm trying to do and after visiting 2xrsa.3ds.guide it boots to safea9lhinstaller but pressing select doesn't do anything at all?

Pressing another button causes it to reboot. Very strange. Any ideas?

Sent from my ONEPLUS A3003 using Tapatalk

 

[Dave_Chad]

Just realised the start button doesn't reboot the console though.. I wonder if the start and select buttons are broken?

Not sure where i would go from there.

Sent from my ONEPLUS A3003 using Tapatalk

 

[pixelmasher]

Hi all i have modded about 7 3ds so far without issues. Got a friends here that I'm trying to do and after visiting 2xrsa.3ds.guide it boots to safea9lhinstaller but pressing select doesn't do anything at all?

Pressing another button causes it to reboot. Very strange. Any ideas?

Sent from my ONEPLUS A3003 using Tapatalk

Look for the otp.bin in the a9lh folder. Is it there? I had something like that happen, but it still installed a9lh. Read some people say they had to try it multiple times.

 

[Dave_Chad]

No otp unfortunately it's not doing a thing.

Sent from my ONEPLUS A3003 using Tapatalk

 

[pixelmasher]

No otp unfortunately it's not doing a thing.

Sent from my ONEPLUS A3003 using Tapatalk

Do you have all the files in the right places?

 

[Dave_Chad]

Yeah I've re checked the directories multiple times and even re downloaded some of the files. Should the start button reboot the installer? I'm thinking those buttons are dead.

Sent from my ONEPLUS A3003 using Tapatalk

 

[adrifcastr]

afaik there was a fork by plailect which used the dpad for users with a broken select button

 

[pixelmasher]

Yeah I've re checked the directories multiple times and even re downloaded some of the files. Should the start button reboot the installer? I'm thinking those buttons are dead.

Sent from my ONEPLUS A3003 using Tapatalk

They could be. You should have 8 files in a9lh folder and arm9 & arm11.bin on root.

 

[Dave_Chad]

Yeah all files are in place... Odd one! As I've said I've done about 7 so far and never had an issue at this step.

Sent from my ONEPLUS A3003 using Tapatalk

 

[pixelmasher]

Yeah all files are in place... Odd one! As I've said I've done about 7 so far and never had an issue at this step.

Sent from my ONEPLUS A3003 using Tapatalk

I've done more, but once in a while I forget stuff. Other people have too.

I just looked at the photo again. You're using the wrong version of installer. Some other guys did the same thing recently.

You should be using Plailect's 2.0.6 not Aurora's 2.6.7. They also have different files inside. So you're probably missing those.

 

[Dave_Chad]

I've downloaded from his git the 2.0.6 but it still boots to 2.6.7??

Sent from my ONEPLUS A3003 using Tapatalk

 

[pixelmasher]

I've downloaded from his git the 2.0.6 but it still boots to 2.6.7??

Sent from my ONEPLUS A3003 using Tapatalk

Make sure you're using the right files. The other guys did the same thing.
https://gbatemp.net/threads/help-ne...ing-guide-http-3ds-guide.466830/#post-7226033
My suggestion would be to copy the file again to the SD and make sure you're copying the right ones.

 

[Dave_Chad]

Ok deleted EVERYTHING and downloading from Plailects git again...

Jesus... 2.6.7 still. Is there a different data input zip I should be using that's the only file not downloaded from Plailects git.

Yeah finally got 2.0.3 to boot and still no install...

Sent from my ONEPLUS A3003 using Tapatalk

 

[Dave_Chad]

afaik there was a fork by plailect which used the dpad for users with a broken select button

Hi just seen your reply. I've googled best i can and had a look at his GIT can't see this version but would like to test it!

Sent from my ONEPLUS A3003 using Tapatalk

 

[Tenshi_Okami]

Could the plailect one be this? https://github.com/Plailect/SafeA9LHInstaller

 

[Dave_Chad]

Yes that's the one and i've gotten it to boot but now i'm thinking the start and select buttons are totally dead on this unit. Now concerned about getting it back to stock though as i don't know how i can restore the nand backup at this stage in the process...

 

[Dave_Chad]

@pixelmasher

[emoji23][emoji23][emoji23]

Sent from my ONEPLUS A3003 using Tapatalk

 

[leerz]

replace a9lh bin file from that of luma

https://3ds.guide/troubleshooting#ts_safe_a9lh

 

[Dave_Chad]

It's all good now i went cowboy and took it apart and cleaned the start and select contacts on the motherboard. Easy and the latest A9LHInstaller worked just fine... I knew it was those bloody buttons!