Homebrew Question I'm new to this

Markws

Member
OP
Newcomer
Joined
Aug 10, 2019
Messages
6
Trophies
0
Age
35
XP
79
Country
Zimbabwe
Hi everyone, I'm kinda new to this and decided to take an easy route so bought myself one of those dongles with 3 payloads, I followed youtube video, and i believe I managed to updated the OSs ( SX, Atmosphere, ReiNX) and the loader.

for the past 2 days I was trying to figure what what's Homebrew, and how to run ROMs using my switch after i managed to load the OS.
then i found out about goldleaf and other homebrew apps.

I wrote the previous introduction to state that the written above is all I know about switch emulation lol, take it easy with me.

I tried to install an nsp game while running on the atmosphere, and I got error 0x291 module ETicket (145) on Goldleaf, prior to that it stated that the game is already installed although there's no trace of it.

I will really appreciate any help here, and even if you can't help me with the error, would love to know if there's a possible way to find if this game is hiding somewhere on my memory to delete it.

thanks
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,100
Trophies
2
XP
18,256
Country
United States
Hi everyone, I'm kinda new to this and decided to take an easy route so bought myself one of those dongles with 3 payloads, I followed youtube video, and i believe I managed to updated the OSs ( SX, Atmosphere, ReiNX) and the loader.

for the past 2 days I was trying to figure what what's Homebrew, and how to run ROMs using my switch after i managed to load the OS.
then i found out about goldleaf and other homebrew apps.

I wrote the previous introduction to state that the written above is all I know about switch emulation lol, take it easy with me.

I tried to install an nsp game while running on the atmosphere, and I got error 0x291 module ETicket (145) on Goldleaf, prior to that it stated that the game is already installed although there's no trace of it.

I will really appreciate any help here, and even if you can't help me with the error, would love to know if there's a possible way to find if this game is hiding somewhere on my memory to delete it.

thanks
If you're using Atmosphere (not Kosmos), you need these signature patches:
https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/
 

Markws

Member
OP
Newcomer
Joined
Aug 10, 2019
Messages
6
Trophies
0
Age
35
XP
79
Country
Zimbabwe
thank you for replying,

one of the tools that I added with goldleaf was kosmos updater, but when i ran it the first time, I only chose to update Hekate without modifying anything else, can I processed and use the patch in the link provided?
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,100
Trophies
2
XP
18,256
Country
United States
thank you for replying,

one of the tools that I added with goldleaf was kosmos updater, but when i ran it the first time, I only chose to update Hekate without modifying anything else, can I processed and use the patch in the link provided?
Which payload do you use when you coldboot your system? Hekate, or fusee-primary?
 

Markws

Member
OP
Newcomer
Joined
Aug 10, 2019
Messages
6
Trophies
0
Age
35
XP
79
Country
Zimbabwe
Which payload do you use when you coldboot your system? Hekate, or fusee-primary?
as far as I can tell, when I boot the game it says atmosphere (I'm on 0.9.3 btw) on the screen, I remember using fusee-primary.bin when I updated the first time as the payload, but not sure what are the effects of that kosmos updater altered the process or something.

is there a way from the homebrew to figure what what's running right now? because for me simply after the game boots i go to the album I press R+A then i get lost there.
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,100
Trophies
2
XP
18,256
Country
United States
as far as I can tell, when I boot the game it says atmosphere (I'm on 0.9.3 btw) on the screen, I remember using fusee-primary.bin when I updated the first time as the payload, but not sure what are the effects of that kosmos updater altered the process or something.

is there a way from the homebrew to figure what what's running right now? because for me simply after the game boots i go to the album I press R+A then i get lost there.
Did you add the above signature patches?
 

notimp

Well-Known Member
Member
Joined
Sep 18, 2007
Messages
5,782
Trophies
1
XP
4,395
Country
Laos
He means, which payload is on the dongle/did you boot it from the dongle with (if more than one are on your dongle).
edit: Atmosphere is fine. Thats a good base to start. Maybe the best.. ;) (Its important for us to know in which of the three CFWs you actually booted into.. ;) )



On goldleaf - make sure you are not using 0.6.0, it had an issue with installing bigger games onto fat32 partitions.

Why did you install 3 custom firmwares at once? Because a youtuber said so? Because it was some "many in one package" (Kosmos). Dont worry this is not an issue. Its just -- idk, funny? ;)


Presuming you dont care about getting banned from Nintendos Online service (installing .nsps on a non emunand is a sure ways to get banned):

With goldleaf installed on the switch, start small. Copy a different .nsp that is smaller than 4 GB onto the sdcard. Then install it through goldleaf. If you see that working, you can troubleshoot the PC client/driver installation on the PC side (presuming you did transfer/install with goaldleaf over USB).


If you dont have one - make a nand backup first. (In hekate.) Buy a separate 32gb sdcard for that. Ideally. (10 USD roughly.)

Then - if no game shows up, use goldleafs "manage sdcard (or internal storage, depending where you installed it to) option", it should show up there - if only numbers show up figure out the games 'game id' and cautiously deinstall that (as well as sub items of that id). Goldleaf should be able to do that even if it the game doesnt show up on the switch (odd). That way you should be able to try to install that .nsp again.

edit: Follow Lacius' lead. He'll will try to support you and do a good job as well. :)
Just answer my questions/try what I suggested - maybe, eventually, so we get additional information.

Also - start reading, and dont just follow youtube toutorials. The moron (sorry) quota on people wanting to play 'youtube helpa youtuber for the world' is high, and videos get outdated fast. Written tutorials can be updated easily - videos - different story.

@Everyone else - dont try to make this the norm for this subforum. ('I watched video - now, what have I done - help.')
 
Last edited by notimp,

Markws

Member
OP
Newcomer
Joined
Aug 10, 2019
Messages
6
Trophies
0
Age
35
XP
79
Country
Zimbabwe
as far as I can tell, when I boot the game it says atmosphere (I'm on 0.9.3 btw) on the screen, I remember using fusee-primary.bin when I updated the first time as the payload, but not sure what are the effects of that kosmos updater altered the process or something.

is there a way from the homebrew to figure what what's running right now? because for me simply after the game boots i go to the album I press R+A then i get lost there.


the update of that kosmos seems to have interfered with the fusee-primary... I believe that went wrong.. will format and update all the payloads again, will use the official atmosphere 0.9.3 with fusee-primary.bin

--------------------- MERGED ---------------------------

He means, which payload is on the dongle/did you boot it from the dongle with (if more than one are on your dongle).

On goldleaf - make sure you are not using 0.6.0, it had an issue with installing bigger games onto fat32 partitions.

Why did you install 3 custom firmwares at once? Because a youtuber said so? Because it was some "many in one package" (Kosmos). Dont worry this is not an issue. Its just -- idk, funny? ;)


Presuming you dont care about getting banned from Nintendos Online service (installing .nsps on a non emunand is a sure ways to get banned):

With goldleaf installed on the switch, start small. Copy a different .nsp that is smaller than 4 GB onto the sdcard. Then install it through goldleaf. If you see that working, you can troubleshoot the PC client/driver installation on the PC side (presuming you did transfer/install with goaldleaf over USB).


If you dont have one - make a nand backup first. (In hekate.) Buy a separate 32gb sdcard for that. Ideally. (10 USD roughly.)

If no game shows up, use goldleafs "manage sdcard (or internal storage, depending where you installed it to) option", it should show up there - of only numbers show up figure out the games 'game id' and cautiously deinstall that (as well as sub items of that id). Goldleaf should be able to do that even if it the game doesnt show up on the switch (odd). That way you should be able to try to install that .nsp again.


official Atmosphere, ReiNX and XS Os, using the RCMloader you can switch between 3 payloads easily, I get the extra SD for the nand for sure, and also for the goldleaf I have 0.6.1, I get to press install, and that error pops.

also I'm aware of the risk that I might get banned from Nintendo online services, I'm doing those tests on an extra console, thanks for the tips
 

Markws

Member
OP
Newcomer
Joined
Aug 10, 2019
Messages
6
Trophies
0
Age
35
XP
79
Country
Zimbabwe
Did you add the above signature patches?
I formatted the SD, Added all the atmosphere original files will be booting from fusee-primary, but I had suspicions regarding the nsp file, so I'm downloading a new one from a trusted source, will test again on it and update you if I get the error, also patched the atmosphere directory on the sd with the link you provided.

I really appreciate your patience with me
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,100
Trophies
2
XP
18,256
Country
United States
I formatted the SD, Added all the atmosphere original files will be booting from fusee-primary, but I had suspicions regarding the nsp file, so I'm downloading a new one from a trusted source, will test again on it and update you if I get the error, also patched the atmosphere directory on the sd with the link you provided.

I really appreciate your patience with me
I recommend using DZ Tinfoil instead of Goldleaf.
 

notimp

Well-Known Member
Member
Joined
Sep 18, 2007
Messages
5,782
Trophies
1
XP
4,395
Country
Laos
Ok. So - if you were using Kosmos, you should have the "sweet patches" ( https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/ ) installed already. If you were not - you have to install them separately, so .nsps will load (just copy them over onto your SD card).

But this shouldnt be an issue with installing an .nsp, but only later, when trying to launch it - so something else went 'wrong' - what exactly - at least I dont know.

I used Goledleaf, never had your issue. You can try another installer program (like the one Lacius suggested) as well.
 
Last edited by notimp,

Markws

Member
OP
Newcomer
Joined
Aug 10, 2019
Messages
6
Trophies
0
Age
35
XP
79
Country
Zimbabwe
I recommend using DZ Tinfoil instead of Goldleaf.
yes, after the clean format, used Tinfoil instead, and everything seems to install perfectly without an issue, probably that nsp was corrupted as well, installed the new one and it is running thank you for the tips.


Ok. So - if you were using Kosmos, you should have the "sweet patches" ( https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/ ) installed already. If you were not - you have to install them separately, so .nsps will load (just copy them over onto your SD card).

But this shouldnt be an issue with installing an .nsp, but only later, when trying to launch it - so something else went 'wrong' - what exactly - at least I dont know.

I used Goledleaf, never had your issue. You can try another installer program (like the one Lacius suggested) as well.

thanks alot, the issue is solved
 
  • Like
Reactions: Lacius

notimp

Well-Known Member
Member
Joined
Sep 18, 2007
Messages
5,782
Trophies
1
XP
4,395
Country
Laos
probably that nsp was corrupted as well,
Yes, that actually is likely.

Now (more serious talk), why do we need two people and six support posts, until you test, if the one thing you tried installing was actually functional?

If we are honest, and accept - that at first you didnt do much but watch a video, and then asked what you did after that - why don't you try eliminating the potential failure sources on your end first - before asking for help.

Like not reading. Or only trying to install one thing, once. And then running to a (wrong) forum for help.

Glad you got things sorted.

Next time, maybe dont install three custom firmwares at once, and then ask what you just did. And what you should learn next.

(Read, pick one, ... ;) )
 
Last edited by notimp,

You may also like...

General chit-chat
Help Users
  • M4x1mumReZ @ M4x1mumReZ:
    @Shape, Oh hey Shape
  • M4x1mumReZ @ M4x1mumReZ:
    Lovely to see you here
  • M4x1mumReZ @ M4x1mumReZ:
    @Veho, Use the peaness.
  • Veho @ Veho:
    Embrace the peaness.
    +1
  • M4x1mumReZ @ M4x1mumReZ:
    This pleases the nut.
  • K3N1 @ K3N1:
    Tiny Peas big peas every size that you need peal your peas smack your peas yank your pea just eat healthy and enjoy your pea
    +3
  • K3N1 @ K3N1:
    Don't put your pea near the bean or you could end up with baby peas
    +3
  • ZeroT21 @ ZeroT21:
    guess this is what the internet does to all of us
    +1
  • K3N1 @ K3N1:
    It makes you play with your pea?
    +1
  • Veho @ Veho:
    I was like this before the internet.
    +1
  • M4x1mumReZ @ M4x1mumReZ:
    @K3N1, *pea-nus
  • M4x1mumReZ @ M4x1mumReZ:
    @ZeroT21, Turns us into horny people that deserve to be bonked
  • M4x1mumReZ @ M4x1mumReZ:
    Like me
  • K3N1 @ K3N1:
    Buy more cleaned and refurbished at DkOldies today!
    +1
  • K3N1 @ K3N1:
    That'll be $650 for a DS
    +1
  • M4x1mumReZ @ M4x1mumReZ:
    Get your grubby broken consoles from this Eminem looking ass
  • K3N1 @ K3N1:
    Grampsinem
    +1
  • M4x1mumReZ @ M4x1mumReZ:
    His prices are way beyond the slim shady
  • M4x1mumReZ @ M4x1mumReZ:
    lmao
  • K3N1 @ K3N1:
    It's a slim price to pay for shady products
    +1
  • M4x1mumReZ @ M4x1mumReZ:
    That's more like it
    M4x1mumReZ @ M4x1mumReZ: That's more like it