Hacking i need help with bricked 3ds

[RedDyan]

hi all i have one 0ld3ds xl 10.7 and runing on A9HLH and luma3ds (6 MONTHS OLD INSTALLED)...
yesterday i try to to restor it to stock firm with decrypt9 with one NAND_original.bin of my device but a get erro after that my bin is to small. 3ds freeze and i power it off by press power button, when i power on the blue light come but screens looks powered off i can't get to decrypt9 or recovery mode and the wifi switch doen't work to.... is any way i can recover it even with hardmod or not...plz help

 

[x65943]

If your "NAND_original.bin" isn't broken, and you bricked because something went wrong in the restore process, then a hard mod will fix your 3ds. Is your "NAND_original.bin" 988,807,168 bytes?

 

[RedDyan]

i have two different nand.bin on 954 MB (1.000.341.504 byte)

 

[x65943]

It seems you have the Samsung NAND - I have the Toshiba so mine's a slightly different size.

One of your nand backups is probably good. If you hardmod your device I'd say your chances of fixing your issue are pretty good. There's a pretty low chance both are bad dumps. Have you restored either of them in the past?

 

[RedDyan]

no i haven't try yet exept yesterday
but i want to try hard mode...do this reopen the screens?

 

[Red_Alive]

3ds freeze and i power it off by press power button, when i power on the blue light come but screens looks powered off

same thing happened to me , was able to save it with a NAND Back up and Hardmod

 

[x65943]

By "reopen the screen", do you mean "will the screen come back on"

The hardmod will completely reflash your nand to when you backed it up - so the system will turn on just fine.

 

[Red_Alive]

i want to try hard mode...do this reopen the screens?

when u ll solder the 4 wires , your 3ds should power up to a blue screen

--------------------- MERGED ---------------------------

then flash your nand

 

[RedDyan]

By "reopen the screen", do you mean "will the screen come back on"

The hardmod will completely reflash your nand to when you backed it up - so the system will turn on just fine.

yes man

could i use this tutorial https://gbatemp.net/threads/tutorial-noob-friendly-nand-dumping-2ds-3ds-3ds-xl-n3ds-n3ds-xl.414498/ or is any better one?

 

[x65943]

yes man

could i use this tutorial https://gbatemp.net/threads/tutorial-noob-friendly-nand-dumping-2ds-3ds-3ds-xl-n3ds-n3ds-xl.414498/ or is any better one?

Yes. The win32diskimager will allow you to read and write your console's nand. When you get to the point where you're using that tool - write your backup nand "NAND_original.bin" to your system instead of dumping your nand.

 

[RedDyan]

thanks guy for help appreciate all your support!!! thank you

 

[NanoSpriggan]

Make sure that you're using an adapter that the guide recommends, not every one will work.