HTC Inspire 4g Unbricking Guide

Discussion in 'Android' started by Xoo00o0o0o, Nov 17, 2011.

Nov 17, 2011
  1. Xoo00o0o0o
    OP

    Member Xoo00o0o0o Xoo00o0o0o is in the house

    Joined:
    Apr 23, 2009
    Messages:
    796
    Location:
    Dallas, TX
    Country:
    United States
    HTC Inspire 4g Unbricking Guide​
    In this guide I will be showing you how to unbrick the HTC Inspire 4g for AT&T.​
    Requirements:​
    1. Your bricked phone (of-course)​
    2. HTC-Sync​
    3. USB Cable​
    4. HTC Inspire 4g Gingerbread RUU​
    5. S-ON​
    Steps:​
    1. Download HTC-Sync from: http://dl3.htc.com/application/HTCSyncv3.0.5579.exe​
    2. Download HTC Inspire Gingerbread RUU from: http://dl4.htc.com/RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe​
    3. Install HTC-Sync​
    4. Boot into Bootloader mode and plug your phone into your pc​
    5. Run the RUU executable​
    6. It will take a moment to start, but when it does, go through the steps and it should start to flash the firmware​
    7. (Optional) Sometimes the process will freeze. It is ok though, open task manager, close the process, unplug your phone, pull the battery, and start over the process until you get it to work. (It worked first time for me.)​
    Then your phone should restart after it finishes flashing. Then your phone will be unbricked!​
    Thank you for looking and I hope this helps you in some way!​
    Original guide is from: http://answers.downloadatoz.com/q,14764,bricked-htc-inspire-4g-how-to-fix.html​
     
  2. Xoo00o0o0o
    OP

    Member Xoo00o0o0o Xoo00o0o0o is in the house

    Joined:
    Apr 23, 2009
    Messages:
    796
    Location:
    Dallas, TX
    Country:
    United States
    Sorry for double post, but, the main post now has the guide!
     

Share This Page