How fix error 2162-0002 on update to 10.0.0 ( soft-brick )
Is my first post.
When updating the console to version 10.0.0, it rebooted and an error appeared on the screen.
error 2162-0002
It did not start either in safe mode or in recovery mode.
After days and days of work, I found a solution.
Using advanced hacking techniques (setting atmosphere haha)
I could see that the problem was with the module (hid-sysmodule) id 01000000000013. days later nintendo put an update that only modified this module. ^ ^
We had to wait for Nintendo to release 10.0.1 to find the solution.
summarized step by step:
requirements:
2) put the jig and enter RCM mode
(it is recommended to make a backup)
3) open the tegraRCM and go to settings and install drivers
4) open the tegraRCM and go to tools, get the BIS_keys using tegraRCM
5) turn off and re-enter RCM mode
6) now select emuMMC rawnand and press ok
7) we accept that we will do it at our own risk
8) we run hacDiskMount as administrator
9) file -> open phisical drive
10) select linux drive (29.1GB)
1) select the system partition.
Copy the 32 character “BIS Key 2 (Crypt)” key you obtained earlier into the Crypto (Upper) text box
Copy the 32 character “BIS Key 2 (Tweak)” key you obtained earlier into the Tweak (Lower) text box
12) press test (should give OK in green)
13) select from the list of devices one available.
14) mount, wait and go to "my pc"
15) open the newly mounted SYSTEM partition and go to the contents/registered folder.
16) paste the zip folders and replace
17) close, go to the hacDiskMount and unmount.
18) we turn off the switch and turn it on.
19) READY! It will tell us that we have version 10.0.1 but it will still ask us to update.
20) update and you're done
When updating the console to version 10.0.0, it rebooted and an error appeared on the screen.
error 2162-0002
It did not start either in safe mode or in recovery mode.
After days and days of work, I found a solution.
Using advanced hacking techniques (setting atmosphere haha)
I could see that the problem was with the module (hid-sysmodule) id 01000000000013. days later nintendo put an update that only modified this module. ^ ^
We had to wait for Nintendo to release 10.0.1 to find the solution.
summarized step by step:
requirements:
- the console must be "hackable" (must not be patched)
- have a JIG
- download tegraRCM.
- download the hacDiskMount
- download the following .zip drive google id 1BskyySpjkh3eqD8CCQbitrboREil12sk
2) put the jig and enter RCM mode
(it is recommended to make a backup)
3) open the tegraRCM and go to settings and install drivers
4) open the tegraRCM and go to tools, get the BIS_keys using tegraRCM
5) turn off and re-enter RCM mode
6) now select emuMMC rawnand and press ok
7) we accept that we will do it at our own risk
8) we run hacDiskMount as administrator
9) file -> open phisical drive
10) select linux drive (29.1GB)
1) select the system partition.
Copy the 32 character “BIS Key 2 (Crypt)” key you obtained earlier into the Crypto (Upper) text box
Copy the 32 character “BIS Key 2 (Tweak)” key you obtained earlier into the Tweak (Lower) text box
12) press test (should give OK in green)
13) select from the list of devices one available.
14) mount, wait and go to "my pc"
15) open the newly mounted SYSTEM partition and go to the contents/registered folder.
16) paste the zip folders and replace
17) close, go to the hacDiskMount and unmount.
18) we turn off the switch and turn it on.
19) READY! It will tell us that we have version 10.0.1 but it will still ask us to update.
20) update and you're done
