Help Change Switch Lite Color?

[Skanob]

gidday all!

Can someone please help me or point how i can change my switch lite color?

Based on research, this involves prodinfo modification?

https://github.com/CaramelDunes/prodinfo_gen/issues/14

But above has got no update.

got the black one, want to physically change to a different one.

thank you kindly all!

 

[hippy dave]

This page shows ColorVariation as 6 bytes within CAL0
https://switchbrew.org/wiki/Calibration

That value is referenced under GetHomeMenuScheme under set:sys on this page
https://switchbrew.org/wiki/Settings_services
which says ColorVariation should be between 1 and 4.

The tool you linked has code for it here
https://github.com/CaramelDunes/pro...0c1973e7e388d5ae2/source/prodinfo/cal0.c#L470

I just wanna say the obvious, make sure you've got your original prodinfo backed up properly, in places it won't get lost or deleted, before you mess with anything.
Ideally tho, it could be changed at a higher level, by configuring/coding Atmosphere to report a different value.

 

[Skanob]

This page shows ColorVariation as 6 bytes within CAL0
https://switchbrew.org/wiki/Calibration

That value is referenced under GetHomeMenuScheme under set:sys on this page
https://switchbrew.org/wiki/Settings_services
which says ColorVariation should be between 1 and 4.

The tool you linked has code for it here
https://github.com/CaramelDunes/pro...0c1973e7e388d5ae2/source/prodinfo/cal0.c#L470

All these just went over my head.

I just wanna say the obvious, make sure you've got your original prodinfo backed up properly, in places it won't get lost or deleted, before you mess with anything.

Will definitely soon be backing up prodinfo once picofly kit arrives.

Ideally tho, it could be changed at a higher level, by configuring/coding Atmosphere to report a different value.

This would be best and ideal.

I hope someone can create a homebrew or something for this. Or atleast guide?

 

[Skanob]

This page shows ColorVariation as 6 bytes within CAL0
https://switchbrew.org/wiki/Calibration

That value is referenced under GetHomeMenuScheme under set:sys on this page
https://switchbrew.org/wiki/Settings_services
which says ColorVariation should be between 1 and 4.

The tool you linked has code for it here
https://github.com/CaramelDunes/pro...0c1973e7e388d5ae2/source/prodinfo/cal0.c#L470

I just wanna say the obvious, make sure you've got your original prodinfo backed up properly, in places it won't get lost or deleted, before you mess with anything.
Ideally tho, it could be changed at a higher level, by configuring/coding Atmosphere to report a different value.

I've found a prodinfo online, just to try it out. Openned it on HexViewer via Notepad++.

Which one should be changed?

Would there be a list of what colors shows what values?

Also 0x4220 to 0x4260 shows colors as well?

I'm starting to think the file I found is a dud...?

 

[randy_w]

prodinfo needs to be decrypted. Make sure the first few bytes read "CAL0" in ascii area, otherwise it's not decrypted properly.

 

[Skanob]

prodinfo needs to be decrypted. Make sure the first few bytes read "CAL0" in ascii area, otherwise it's not decrypted properly.

yup, seems to be decrypted already:

 

[Marax]

I changed the Mainboard from a Yellow Switch Lite to an Coral one. Now the Controller says its Yellow and i would like to change that. Picofly is installed. Can someone help me with the Values?