Dear all,
I've read a lot on the subject, but didn't find (yet) a solution to my issue.
The gateway is working well with many games => a priori clean installation
I'm experiencing a black screen issue with Pokemon Moon E : In gateway mode, select the pokemon moon rom, logo is displayed on to screen. Launch the game. A 3DS (red) logo is displayed, then black screen and the 3DS remains frozen.
I tested 2 roms downloaded from different sources. I did (successfully) apply the Cart1to2 conversion. It is successful because if I try to apply the card1to2 again, I've got an error message saying the rom is already in mode 2.
Details:
I'm using an "old" 3ds which is running firmware 4.5.0-8E. I use a gateway with latest software (gateway ultra 4.2). I use the DS profile exploit to start gateway mode => no luma, no A9HL, just "standard" gateway things.
What I did up to now:
I downloaded firmware with 3dNUS : 11.2.0-35E. Installation via the "Title Manager" program (cia file being copied on the sd card). As the same black screen was experienced, and as I read in a french forum that old 3ds only support the firmware 11.0.0-33E, despite my doubts, I try also this firmware (starting from a clean install as detailed below). Nothing changes.
1) SD card preparation
1.1) delete the two partitions from the sd card (i.e. the emunand + original partition), make a new partition + format the sd card => new blank starting point
1.1) Copy the Launcher.dat file on the root of the sd card.
1.3) Copy the firmware file (obtained using 3dNUS) on the SD card
2) Emunand setup
2.1) Install the DS exploit (using blue card)
2.2) Start Gateway software (Ds Profile + L button)
2.3) Format Emunand from the gateway software
3) Emunand update
3.1) Launch "Title Manager" (software used to install cia files)
3.2) Apply all the CIA from the firmware directory
3.3) Once finished Reboot without going onto the home menu (as advised on forums)
4) Play the game
4.1) Cry, doesn't work
5) Format sysnand
=> I read on forums that a possible problem with game using extended memory mode could be solved by formatting sysnand from the parameters menu
It does not change anything.
So I did the whole procedure many times, with variations (formating emunand instead of sysnand, installing different firmware, etc.).
Please share any idea, I do not have any idea lefts.
Thanks
I've read a lot on the subject, but didn't find (yet) a solution to my issue.
The gateway is working well with many games => a priori clean installation
I'm experiencing a black screen issue with Pokemon Moon E : In gateway mode, select the pokemon moon rom, logo is displayed on to screen. Launch the game. A 3DS (red) logo is displayed, then black screen and the 3DS remains frozen.
I tested 2 roms downloaded from different sources. I did (successfully) apply the Cart1to2 conversion. It is successful because if I try to apply the card1to2 again, I've got an error message saying the rom is already in mode 2.
Details:
I'm using an "old" 3ds which is running firmware 4.5.0-8E. I use a gateway with latest software (gateway ultra 4.2). I use the DS profile exploit to start gateway mode => no luma, no A9HL, just "standard" gateway things.
What I did up to now:
I downloaded firmware with 3dNUS : 11.2.0-35E. Installation via the "Title Manager" program (cia file being copied on the sd card). As the same black screen was experienced, and as I read in a french forum that old 3ds only support the firmware 11.0.0-33E, despite my doubts, I try also this firmware (starting from a clean install as detailed below). Nothing changes.
1) SD card preparation
1.1) delete the two partitions from the sd card (i.e. the emunand + original partition), make a new partition + format the sd card => new blank starting point
1.1) Copy the Launcher.dat file on the root of the sd card.
1.3) Copy the firmware file (obtained using 3dNUS) on the SD card
2) Emunand setup
2.1) Install the DS exploit (using blue card)
2.2) Start Gateway software (Ds Profile + L button)
2.3) Format Emunand from the gateway software
3) Emunand update
3.1) Launch "Title Manager" (software used to install cia files)
3.2) Apply all the CIA from the firmware directory
3.3) Once finished Reboot without going onto the home menu (as advised on forums)
4) Play the game
4.1) Cry, doesn't work
5) Format sysnand
=> I read on forums that a possible problem with game using extended memory mode could be solved by formatting sysnand from the parameters menu
It does not change anything.
So I did the whole procedure many times, with variations (formating emunand instead of sysnand, installing different firmware, etc.).
Please share any idea, I do not have any idea lefts.
Thanks