Fusee

[momo1025]

Hello, I have just updated my firmware to 18.1.0 using daybreak.
Then I proceeded to install atmosphere and sigpatches as always.
But this time, I am getting incorrect fusée version.
I downloaded the corresponding fusée.bin file, but still getting the error

So, I tested without the SD and same error.
It seems that the switch is just blocked on that message, cannot get it to be identified by my PC to launch tegrarcm..
Can you help?

 

[thesjaakspoiler]

This problem only occurs when the fusee.bin that you inject and the files on the SD card don't match.
Maybe daybreak installed an older version?

 

[impeeza]

Hello, I have just updated my firmware to 18.1.0 using daybreak.
Then I proceeded to install atmosphere and sigpatches as always.
But this time, I am getting incorrect fusée version.
I downloaded the corresponding fusée.bin file, but still getting the error

So, I tested without the SD and same error.
It seems that the switch is just blocked on that message, cannot get it to be identified by my PC to launch tegrarcm..
Can you help?

you ALWAYS MUST TO UPGRADE ATMOSPHÈRE AND HEKATE BEFORE upgrading the firmware.


The best way of upgrading your console is:

• Backup your SD Card. (copy all files to your pc, DO NOT FORMAT ANY PARTITION)
• Backup your emuNAND:
  • if yours is file based is already backup with the sd card file backup
  • if your is Raw Partition based, you can use https://gbatemp.net/threads/emutool...r-sd-switch-emu-type-on-sxos-and-more.550756/ to backup it.
• From your SD card remove the folder SDMC:/atmosphere/contents (or SDMC:/atmosphere/titles if your atmosphère is really OLD
• Remove incognito from your *NAND if you enabled using INCOGNITO_RCM because can create problems on the new firmware/atmosphère versions.
• Upgrade your Atmosphère files using a new downloaded file from https://github.com/Atmosphere-NX/Atmosphere/releases , even if you think you have the most recent, download again, it has been silent updated several times
• Edit your SDMC:/exosphere.ini file and add/change the next values to «1» in order to enable incognito on telemetry:
  

  blank_prodinfo_sysmmc=1
  blank_prodinfo_emummc=1

• Enable DNSMiTM, editing the SDMC:/atmosphere/config/system_settings.ini and add/edit the value:
  enable_dns_mitm = u8!0x1
  to u8!ox1 value
• Upgrade your Hekate files using a new downloaded file from https://github.com/CTCaer/Hekate/releases, overwrite all files on your SD Card, even if you think you have the most recent, download again, it has been silent updated several times
• Upgrade your payload.bin file, if you use a injector on the injector, if you use a modchip replacing the file SDMC:/payload.bin file, if you use hekate rename the file hekate_ctcaer_X.Y.Z.bin to payload.bin and copy to root of your SDCard.
• Download the latest sigpatches from https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-package3.571543/ , extract the file and copy to the root of your SD Card, overwrite all files.
• Download the latest SYS-Patch from https://gbatemp.net/download/sys-patch-1-5-2-binary-fw-18-1-0-atmosphere-1-7-1.38686/, extract and copy to the root of your SD Card, overwrite all files.
• Now you can start your console, first time could take 2 - 5 minutes
• once your console start you can install all new versions of the sysmodules/cheats you like. and upgrade firmware using Daybreak

 

[petspeed]

you ALWAYS MUST TO UPGRADE ATMOSPHÈRE AND HEKATE BEFORE upgrading the firmware.


The best way of upgrading your console is:

• Backup your SD Card. (copy all files to your pc, DO NOT FORMAT ANY PARTITION)
• Backup your emuNAND:
  • if yours is file based is already backup with the sd card file backup
  • if your is Raw Partition based, you can use https://gbatemp.net/threads/emutool...r-sd-switch-emu-type-on-sxos-and-more.550756/ to backup it.
• From your SD card remove the folder SDMC:/atmosphere/contents (or SDMC:/atmosphere/titles if your atmosphère is really OLD
• Remove incognito from your *NAND if you enabled using INCOGNITO_RCM because can create problems on the new firmware/atmosphère versions.
• Upgrade your Atmosphère files using a new downloaded file from https://github.com/Atmosphere-NX/Atmosphere/releases , even if you think you have the most recent, download again, it has been silent updated several times
• Edit your SDMC:/exosphere.ini file and add/change the next values to «1» in order to enable incognito on telemetry:
  

  blank_prodinfo_sysmmc=1
  blank_prodinfo_emummc=1

• Enable DNSMiTM, editing the SDMC:/atmosphere/config/system_settings.ini and add/edit the value:
  enable_dns_mitm = u8!0x1
  to u8!ox1 value
• Upgrade your Hekate files using a new downloaded file from https://github.com/CTCaer/Hekate/releases, overwrite all files on your SD Card, even if you think you have the most recent, download again, it has been silent updated several times
• Upgrade your payload.bin file, if you use a injector on the injector, if you use a modchip replacing the file SDMC:/payload.bin file, if you use hekate rename the file hekate_ctcaer_X.Y.Z.bin to payload.bin and copy to root of your SDCard.
• Download the latest sigpatches from https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-package3.571543/ , extract the file and copy to the root of your SD Card, overwrite all files.
• Download the latest SYS-Patch from https://gbatemp.net/download/sys-patch-1-5-2-binary-fw-18-1-0-atmosphere-1-7-1.38686/, extract and copy to the root of your SD Card, overwrite all files.
• Now you can start your console, first time could take 2 - 5 minutes
• once your console start you can install all new versions of the sysmodules/cheats you like.

Final step should be to update HOS with Daybreak