1. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France
    Hello everyone,

    I'm new to the Switch hack and after understand most important points I guess of how to use SX OS, I wished to do a dual boot between SX OS and Atmosphere, using my emu nand created for SX OS in Atmosphere, because I want also to enjoy Dreamcast emulation on the go, but flycast is not yet supported in SX OS for now.

    So I followed both of this guide, first this one : https://gbatemp.net/threads/how-to-setup-atmosphere-emummc.541060/

    which I completed with this one : https://gbatemp.net/threads/tutorial-from-sx-os-to-atmosphere.533337/ to boot Hekate and bein possible to launch Hekate thus from sx os so that I can launch Atmosphere. I followed both guide and didn't seems to miss anything. Though, when I use Hekate, I have the possibilty to launch the atmosphere payload, but if I check on emuMMC menu, it's written under emuMMC info and selection menu that it's disabled, as if if I launch my payload for Atmosphere, it will not use the emunand, so my question would be, is it normal and it will still launch Atmosphere with my Emunand or did I do something wrong or do I need to activate something in this menu that I don't know so that it works ?

    If some people could help me, it would be much apreciated. Thank you very much to read me and for your answers in advance.
     
  2. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France
    I took pictures of my situation so that it's easier to understand. I really hope someone can help me.
    My Emu Nand from SX OS was made with hidden file.
     

    Attached Files:

  3. comput3rus3r

    comput3rus3r GBAtemp Psycho!
    Member

    Joined:
    Aug 20, 2016
    Messages:
    3,423
    Country:
    United States
    I'm extremely limited in knowledge of this but I think you'd need to convert the hidden emunand into sd files before you can use it on atmosphere.
     
    ELY_M likes this.
  4. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France
    Thank you for your message !
    I don't know much about this though, but do you know how can I do this ?
    The guide I followed said though to do a step by step set up for hidden files especially, so that's why I don't know why it does not work.
    Is there any risk it may affect my sx os emunand too ?
    Thank you very much !
     
  5. 210modz

    210modz GBAtemp Fan
    Member

    Joined:
    Aug 11, 2017
    Messages:
    338
    Country:
    United States
    Just use the emunand tool posted in the game save section.
     
  6. Pouret

    Pouret Member
    Newcomer

    Joined:
    Dec 11, 2015
    Messages:
    17
    Country:
    France
    Thank you for your messages again !

    Can you give me a link to this tool ? Or you mean it's a tool inside my hardware once I'm in my Emunand ? Thank you. Would be much apreciated if you could explain me in details.
     
  7. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France
    Thank you for the link ! It's really big help. So I just have to give as source to make my Emunand from SX OS hidden file to SX OS file ? Will it work on the same sd card whitout changing it ?

    Thank you so much again
     
  8. tomx86

    tomx86 GBAtemp Advanced Fan
    Member

    Joined:
    Jun 3, 2015
    Messages:
    593
    Country:
    Poland
    1. Lunch hekate in RCM, go to "emuMMC", click on "Migrate emuMMC", and click continue.
    2. Turn off the console and mount the switch microSD card to your pc, and create "Emutendo" folder.
    3. Move everything from "SDroot/emuMMC/ER00/Nintendo/" to "Emutendo".
    4. Copy "raw_based" file from "SDroot/emuMMC/ER00/" to "Emutendo".
    5. Edit the "emummc.ini" file in "SDroot/emuMMC/":
    from:
    [emummc]
    enabled=1
    sector=0x2
    path=emuMMC/ER00
    id=0x0000
    nintendo_path=emuMMC/ER00/Nintendo

    to:
    [emummc]
    enabled=1
    sector=0x2
    path=Emutendo
    id=0x0000
    nintendo_path=Emutendo

    6. Put the microSD card back to the console, and run hekate in RCM.
    7. Go to "Payloads", launch Atmosphere, and now you should be able to run emuNAND on it, and SX emuNAND will still work too.
    PS. If you got any mods that you want to work in Atmosphere too, then copy them from "SDroot/sxos/titles/" to "SDroot/atmosphere/contents/".
    You might also need this:
    https://gbatemp.net/threads/i-heard-that-you-guys-need-some-sweet-patches-for-atmosphere.521164/
     
    Last edited: Jan 22, 2020
    ELY_M likes this.
  9. Pouret

    Pouret Member
    Newcomer

    Joined:
    Dec 11, 2015
    Messages:
    17
    Country:
    France
    Thank you so much for the explanation ! I will try this little bit later and tell you if this worked. It's really kind of you to help me.
     
  10. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France


    Thank you very much for your help ! I succeded to have an emummc in Hekate which is working.
    However, once I try to lunch Atmosphere with fusee gelee primary.bin, the custom firmware first seems to start and then appeared at the screen the sx os screen again and booted the sx os firmware. Then I tried again two more times, and after the atmosphere I had a black screen not letting me through the custom firmware and had to reboot my hardware. Thank you all for your help until now everyone. I feel I'm maybe close to make it works, it would be so kind of you if you could help me to finish the installation. Thank you very much.
     
  11. Pouret

    Pouret Member
    Newcomer

    Joined:
    Dec 11, 2015
    Messages:
    17
    Country:
    France
    Can someone help me to go through the black screen now when I launch Atmosphere ?

    Thank you very much if someone can do that.
     
  12. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France
    I tried to use many different versions of Atmosphere and while I had a lot of black screen with 10 version, with 9.2 version, I had a black screen but also a message telling me that : [NX BOOT ] Unable to identify package 1!. I hope it can lead you to where my problem may be. Thank you.
     
  13. Acidwicht

    Acidwicht Newbie
    Newcomer

    Joined:
    Jan 23, 2020
    Messages:
    1
    Country:
    Germany
    try to install AtlasNX\Kosmos and install sigpatches. should work i did the same for dualboot SXOS and Atmosphere. You can boot into hekate with payload and choose load cfw EmuMMC
     
  14. masterpouret

    OP masterpouret Member
    Newcomer

    Joined:
    Jan 19, 2020
    Messages:
    31
    Country:
    France
    I will try to do what you teached me, acidwicht. Thank you very much for the help. Today I launched it with no emu Nand to see if ti works and it works very well. So it was just it didn't find where is my Nand in the sd card I think. I will try what you told me just in case it works. Thank you very much.

    — Posts automatically merged - Please don't double post! —

    Also about atlas NX, to install sigpatch, should I need to use the Kosmostoolbox ? If you could give me some explanations would be very apreciated. Thank you so much.
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Atmosphere, Emunand,