Hacking Question Executor sx pro help

[shanefromoz]

Hello ,

I have my switch on 6.0 and use sxos 2.0 with a jig and pro dongle. All of a sudden when i add jig and dongle and turn on it goes straight to switch menu rather than sxos menu. Can someone please help me fix this? Thanks Shane

 

[jakkal]

Does the dongle light turn blue
Did you hold vol up while booting?

You probably have a bad jig

 

[shanefromoz]

Dongle has green light on it

 

[jakkal]

Dongle has green light on it

Get a new jig
Is it a text jig? Your switch isn't going into rcm

How are.you turning on the system?

 

[shanefromoz]

Get a new jig
Is it a text jig? Your switch isn't going into rcm

How are.you turning on the system?

I am holding volume + and pressing power. Its the jig that came with the executor sx pro

 

[Krazyeye]

Did you get a console that has been maybe ipatched? Check your console's serial number and see if you are in the clear. BTW, what firmware did your switch originally come with?

 

[shanefromoz]

My jig and dongle work but wont allow me to boot into sxos but rather direct to system menu.
Games still work

--------------------- MERGED ---------------------------

Did you get a console that has been maybe ipatched? Check your console's serial number and see if you are in the clear.

As i said back up games load but i cant boot into sxos menu just direct to system menu

 

[jakkal]

You have to keep holding the vol up after booting up

 

[shanefromoz]

You have to keep holding the vol up after booting up

Ok so just hold the volume up longer. Thanks mate

 

[bundat]

Hello ,

I have my switch on 6.0 and use sxos 2.0 with a jig and pro dongle. All of a sudden when i add jig and dongle and turn on it goes straight to switch menu rather than sxos menu. Can someone please help me fix this? Thanks Shane

That's the expected behavior though.
After first boot (or is it after you have a working license? I forget), SX bootloader menu is skipped and it goes straight into SX OS.
You just get an Xecuter splash screen first so that you know it's SX OS and not official firmware (OFW).

It's more convenient imo, don't have to choose what to do everytime.
If I want to launch an external payload or boot into OFW (which is not often), then you can do what the posters above said and hold vol+