Hacking error while loading fss0

tudorpasca

Member
OP
Newcomer
Joined
Sep 20, 2024
Messages
8
Trophies
0
Age
18
XP
15
Country
Italy
when lauching atmosphere i get

"Error while loading fss0:

atmosphere/package3

Wrong ini cfg or Missing/corrup files/

Failed to lunch Hos/"


on the sd only appears to be bootloader, emuMMC and Nintendo. no atmosphere or exosphere although i installed everything properly and everything disappeared after creating an emuMMC. i need a step by step on what to do please.
 

tudorpasca

Member
OP
Newcomer
Joined
Sep 20, 2024
Messages
8
Trophies
0
Age
18
XP
15
Country
Italy
[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0

[Atmosphere CFW]
fss0=atmosphere/package3
emummcforce=l
kip1patch=nosigchk
icon=bootloader/res/icon_payload.bmp

[Stock SysNAND]
fss0=atmosphere/package3
stock=l
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp
 

Hayato213

Newcomer
Member
Joined
Dec 26, 2015
Messages
20,579
Trophies
1
XP
22,221
Country
United States
[config]
autoboot=0
autoboot_list=0
bootwait=0
verification=1
backlight=100
autohosoff=2
autonogc=0
updater2p=1

[SEMI-STOCK (SYSMMC)]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/stock.bmp
{}

[CFW (SYSMMC)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummc_force_disable=1
icon=bootloader/res/sysnand.bmp
{}

[CFW (EMUMMC)]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/emummc.bmp
{}

You hekate ipl is off, emummcforce=l should be emummcforce=1
 

tudorpasca

Member
OP
Newcomer
Joined
Sep 20, 2024
Messages
8
Trophies
0
Age
18
XP
15
Country
Italy
i assume i have to do the whole process again, so i'm also giving the exosphere just in case:

[exosphere]
debugmode=1
debugmode_user=0
disable_user_exception_handlers=0
enable_user_pmu_access=0
blank_prodinfo_sysmmc=0
blank_prodinfo_emummc=1
allow_writing_to_cal_sysmmc=0
log_port=0
log_baud_rate=115200
log_inverted=0
 

tudorpasca

Member
OP
Newcomer
Joined
Sep 20, 2024
Messages
8
Trophies
0
Age
18
XP
15
Country
Italy
now that i changed the hekate it gives the "nyx is missing" problem, i had this problem also before the fss0 problem, but i was able to make it past, now i'm having the same issue and i noticed that the nyx.ini is in fact missing, why is that?
 

bvang913

Well-Known Member
Member
Joined
Sep 20, 2023
Messages
115
Trophies
0
XP
467
Country
United States
I would try a fresh install of Hekate, atmosphere, etc. By default Nyx has always been included in the Hekate files from the GitHub. Your setup looks like it's missing a lot.
 

tudorpasca

Member
OP
Newcomer
Joined
Sep 20, 2024
Messages
8
Trophies
0
Age
18
XP
15
Country
Italy
I would try a fresh install of Hekate, atmosphere, etc. By default Nyx has always been included in the Hekate files from the GitHub. Your setup looks like it's missing a lot.
no, there's everything, yesterday i was able to open hekate with the same process that everyone uses. but out of the six times i tried, only the second was good, and ever since then hekate didn't work anymore, giving the same issue of "nyx is missing"
 

bvang913

Well-Known Member
Member
Joined
Sep 20, 2023
Messages
115
Trophies
0
XP
467
Country
United States
Should've asked. Are you on the latest firmware, Hekate, atmosphere? If you are just grab the most recent Hekate/nyx from the GitHub and copy and paste. Don't know why nyx would go missing out of nowhere.
 

tudorpasca

Member
OP
Newcomer
Joined
Sep 20, 2024
Messages
8
Trophies
0
Age
18
XP
15
Country
Italy
for everyone wondering, I solved the problem by myself. Anyone who is having the same problem, please make sure your SD is completely formatted. very often the partitions are bugged: you have to click windows+X to open comands prompt, search cmd, then run diskpart -> list disk -> select disk x (with x being your SD letter) -> clean -> convert mbr -> create partition primary -> select partition 1 -> assign.
then probably your computer will tell you that the SD can't be assigned with a letter until you format it, so do it (to a type that possibly isn't exFat, to avoid problems) and then the partition will be created. Last, with easeUS Partition format it again to Fat32 and your SD will be COMPLETELY clean. for some reason the nyx is missing problem shows when the are apparently problems with the SD formatting, so make sure you solve this first.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Psionic Roshambo @ Psionic Roshambo: https://m.youtube.com/shorts/hyAMYj4NpYE +1