emummc speed issue

dehydrated_lemur

Well-Known Member
OP
Member
Joined
Mar 15, 2022
Messages
109
Trophies
0
XP
459
Country
United States
Hey all. I have a OLED with HWFLY 4.1. The sdcard reading is slow. I get long load times and laggy cutscenes in games. I have tried multiple sdcards from other switchs (that work fine). I tried swapping the sd card reader also. Still all the same results. I cannot figure out why im getting slow reading/writing on this console. I took the sdcard out of this switch and put it in another and reads and writes quickly. Hekate does not say Im running in 1 bit mode either. I have formated the sdcard and recreated the emummc multiple times. tried file based and partition based. all the same. any clues at all?
IMG20240107165203.jpg
 

Attachments

  • IMG20240107173523.jpg
    IMG20240107173523.jpg
    3.3 MB · Views: 16

rull_bull

Well-Known Member
Newcomer
Joined
Nov 4, 2023
Messages
94
Trophies
0
Age
39
XP
277
Country
Sweden
Hey all. I have a OLED with HWFLY 4.1. The sdcard reading is slow. I get long load times and laggy cutscenes in games. I have tried multiple sdcards from other switchs (that work fine). I tried swapping the sd card reader also. Still all the same results. I cannot figure out why im getting slow reading/writing on this console. I took the sdcard out of this switch and put it in another and reads and writes quickly. Hekate does not say Im running in 1 bit mode either. I have formated the sdcard and recreated the emummc multiple times. tried file based and partition based. all the same. any clues at all?View attachment 412611

Change resistors to 100ohm on A and C on your chip.
Check post #158 in this thread: https://gbatemp.net/threads/hwfly-shaped-picofly-boards-start-shipping-in-china.632179/page-8
 

dehydrated_lemur

Well-Known Member
OP
Member
Joined
Mar 15, 2022
Messages
109
Trophies
0
XP
459
Country
United States
Change resistors to 100ohm on A and C on your chip.
Check post #158 in this thread: https://gbatemp.net/threads/hwfly-shaped-picofly-boards-start-shipping-in-china.632179/page-8
hey thanks for reply. I'll test the resistors when I get home.
Post automatically merged:

Change resistors to 100ohm on A and C on your chip.
Check post #158 in this thread: https://gbatemp.net/threads/hwfly-shaped-picofly-boards-start-shipping-in-china.632179/page-8
this not a picofly. Does that matter? Can anyone confirm firm which resistors are for A and C? I can't beep them out because the installer covers the chip with UV resin.
Post automatically merged:

I'm gonna leave an update here. I just swapped the hwfly to a picofly with the proper resistors and emunand still doesn't boot and I get 25mbps still on the SDcard. I think the switch is defective? No body has seen anything like this? This switch has me stumped. cfw sysnand boots. ofw boots emunand does not boot because it's is reading directly from the SD card.
 

Attachments

  • IMG20240108155720.jpg
    IMG20240108155720.jpg
    3.1 MB · Views: 14
Last edited by dehydrated_lemur,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • SylverReZ @ SylverReZ:
    @mthrnite, Cheetah Girls, the sequel to Action 52's Cheetah Men.
    +2
  • Psionic Roshambo @ Psionic Roshambo:
    Pokemon Black I played that one a lot
  • K3Nv2 @ K3Nv2:
    Honestly never messed with Pokémon on ds much
  • mthrnite @ mthrnite:
    I played pokemon once, was bored, never tried again
  • Psionic Roshambo @ Psionic Roshambo:
    Oh Dragon Quest IX
  • K3Nv2 @ K3Nv2:
    Spent like 5 hours on switch one never touched it again
  • Psionic Roshambo @ Psionic Roshambo:
    Sentinel of the stary skies
  • K3Nv2 @ K3Nv2:
    Ds is 20 years old this year
  • Psionic Roshambo @ Psionic Roshambo:
    So MJ no longer wants to play with it?
  • K3Nv2 @ K3Nv2:
    He put it down when the 3ds came out
  • SylverReZ @ SylverReZ:
    @K3Nv2, RIP Felix does great videos on the PS3 yellow-light-of-death.
  • Jayro @ Jayro:
    Eventhough the New 3DS XL is more powerful, I still feel like the DS Lite was a more polished system. It's a real shame that it never got an XL variant keeping the GBA slot. You'd have to go on AliExpress and buy an ML shell to give a DS phat the unofficial "DS Lite" treatment, and that's the best we'll ever get I'm afraid.
    +1
  • Jayro @ Jayro:
    The phat model had amazingly loud speakers tho.
    +1
  • SylverReZ @ SylverReZ:
    @Jayro, I don't see whats so special about the DS ML, its just a DS lite in a phat shell. At least the phat model had louder speakers, whereas the lite has a much better screen.
    +1
  • SylverReZ @ SylverReZ:
    They probably said "Hey, why not we combine the two together and make a 'new' DS to sell".
  • Veho @ Veho:
    It's a DS Lite in a slightly bigger DS Lite shell.
    +1
  • Veho @ Veho:
    It's not a Nintendo / iQue official product, it's a 3rd party custom.
    +1
  • Veho @ Veho:
    Nothing special about it other than it's more comfortable than the Lite
    for people with beefy hands.
    +1
  • Jayro @ Jayro:
    I have yaoi anime hands, very lorge but slender.
  • Jayro @ Jayro:
    I'm Slenderman.
  • Veho @ Veho:
    I have hands.
    Veho @ Veho: +1