Homebrew Official [Download] Decrypt9 - Open Source Decryption Tools (WIP)

[Februarysn0w]

Right. Just release the buttons when you see D9 starting up, then everything is fine.

could you add passcode recovery function on decrypt9?
there is 2 offset and passcode stored there. It is shift store address everytime we change the passcode.

https://gbatemp.net/threads/how-to-check-your-3ds-passcode.422796/

 

[PF2M]

Decrypt9 seems to be going insane. I tell it to dump SecureInfo_A to "SecureInfo_A2", and nnidsave.bin to "nnidsave2", and it does so.
Then I put the SD Card into my computer. Neither of the files are there.
I also have files named "SecureInfo_A" and "nnidsave" that injected just fine yesterday, but now they don't come up on the "injectable files" list.
And yet the dumping says that they're there, along with the file "secureinfo_a2" that it thinks happened.
So what the heck is going on with it?

(I'm using the arm9loaderhax payload version, by the way.)

 

[d0k3]

Decrypt9 seems to be going insane. I tell it to dump SecureInfo_A to "SecureInfo_A2", and nnidsave.bin to "nnidsave2", and it does so.
Then I put the SD Card into my computer. Neither of the files are there.
I also have files named "SecureInfo_A" and "nnidsave" that injected just fine yesterday, but now they don't come up on the "injectable files" list.
And yet the dumping says that they're there, along with the file "secureinfo_a2" that it thinks happened.
So what the heck is going on with it?

(I'm using the arm9loaderhax payload version, by the way.)

I can't reproduce this. If you have a work folder ("/Decrypt9"), put all files in there, then try again. The files are most likely on your SD card, cause otherwise you'd have had an error on screen.

 

[FTRBND]

Can this still be used on 10.7 if I have a9lh and aureinand installed for updated sysnand mode.

 

[Giodude]

For some reason whenever i try to restore my nand.bin or emunand.bin i get "no usable file found". I boot it off of a9lh.

 

[Februarysn0w]

Can this still be used on 10.7 if I have a9lh and aureinand installed for updated sysnand mode.

you could boot from bootmanager.

Sent from my 403SC using Tapatalk

 

[d0k3]

For some reason whenever i try to restore my nand.bin or emunand.bin i get "no usable file found". I boot it off of a9lh.

Place these files in the SD card root or in /Decrypt9 (only if you have that folder).

 

[Shadowtrance]

Ok. D9UI is now updated!
https://github.com/Shadowtrance/Decrypt9/releases/tag/v2.4.0

 

[peteruk]

Ok. D9UI is now updated!
https://github.com/Shadowtrance/Decrypt9/releases/tag/v2.4.0

been waiting for this, thanks as always Shadowtrance

 

[MSearles]

Can anyone help to fix this error? I'm using an N3DSXL Aureinand with A9LH. When trying to use the latest Decrypt9-WIP on boot, I get the message

"Finalizing Initialization...

Initialization: failed! (A to exit)"

 

[dark_samus3]

Can anyone help to fix this error? I'm using an N3DSXL Aureinand with A9LH. When trying to use the latest Decrypt9-WIP on boot, I get the message

"Finalizing Initialization...

Initialization: failed! (A to exit)"

that doesn't help us... get the full log off of the SD card, or take a picture of the screen or something so we can see what it is so we can help

 

[MSearles]

that doesn't help us... get the full log off of the SD card, or take a picture of the screen or something so we can see what it is so we can help

-- Decrypt9WIP (2016/04/12) --
Counting 15 submenus and 111 features
Initializing, hold L+R to pause

Initializing SD card... success
0x03 KeyX & KeyY: automatically set up
0x05 KeyY: not found
0x25 KeyX: not found
0x18 KeyX: already set up
0x1B KeyX: not found
Finalizing Initialization...

Initialization: failed!
(A to exit)

 

[dark_samus3]

-- Decrypt9WIP (2016/04/12) --
Counting 15 submenus and 111 features
Initializing, hold L+R to pause

Initializing SD card... success
0x03 KeyX & KeyY: automatically set up
0x05 KeyY: not found
0x25 KeyX: not found
0x18 KeyX: already set up
0x1B KeyX: not found
Finalizing Initialization...

Initialization: failed!
(A to exit)

https://github.com/d0k3/Decrypt9WIP/blob/master/README.md#support-files

 

[MSearles]

https://github.com/d0k3/Decrypt9WIP/blob/master/README.md#support-files

Thank you.

 

[Giodude]

Place these files in the SD card root or in /Decrypt9 (only if you have that folder).

i dont have a decrypt9 folder, i'll try it

EDIT: it didnt work at all. I can't restore nan.bin or emunand.bin, yet the program acknowledges that they exist when backing up a NAND.

 

[d0k3]

i dont have a decrypt9 folder, i'll try it

EDIT: it didnt work at all. I can't restore nan.bin or emunand.bin, yet the program acknowledges that they exist when backing up a NAND.

Maybe there's something wrong with those files? Make sure you update to the newest D9, then try atgain. If it keeps failing, check the sizes of these NAND dumps (also let me know your console type) and show me the first 512 byte of each. What did you use to make these backups?

 

[Giodude]

Maybe there's something wrong with those files? Make sure you update to the newest D9, then try atgain. If it keeps failing, check the sizes of these NAND dumps (also let me know your console type) and show me the first 512 byte of each. What did you use to make these backups?

idk why, but the latest build of otp helper fixed it

 

[cearp]

i'd really appreciuate it if you add encrypted title keys dumping to this program
we can dump decrypted titlekeys, but i think plaintext encrypted are also useful.
thank you

 

[Altairseven]

is there any way to have this run along with the gateway launcher?, I have a new 3ds and i dont want having to change the launcher.dat anytime i want to do a emunand backup

 

[cearp]

is there any way to have this run along with the gateway launcher?, I have a new 3ds and i dont want having to change the launcher.dat anytime i want to do a emunand backup

you can install this - https://github.com/yellows8/hblauncher_loader/releases
to get the hb menu from the home menu