Homebrew Official [Download] Decrypt9 - Open Source Decryption Tools (WIP)

[Februarysn0w]

I got a problem..
I restored my emunand.bin with decrypt9 (build date:17/3/16), somehow emunand tool 1.3 does not detecting my emunand.

of cource decrypt9 and emunand9 detect my emunand perfectly.

 

[d0k3]

I got a problem..
I restored my emunand.bin with decrypt9 (build date:17/3/16), somehow emunand tool 1.3 does not detecting my emunand.

of cource decrypt9 and emunand9 can detect my emunand perfectly.

Don't use EmuNAND Tool anymore... It is severely outdated by now. Use Multi EmuNAND Creator instead (even if you don't use multiple EmuNANDs). If you used most recent EmuNAND9 to create the EmuNAND, you can even use any disk imaging software to manage (backup/restore) your EmuNAND (such as this one).

 

[d0k3]

Yes will do everything to get it working.

Okay, try this:
http://workupload.com/file/0o4pUpSG
Careful, this is a test build (although it should have no problems), so better just test if it runs and wait for the proper release.

If it runs, could you also test the most recent release versions of eitehr EmuNAND9 or GodMode9? I have a suspicion these two need the same fix.

 

[NoGamer]

Ok will do this in a hour, first have to eat something. I can just copy files to SDcard and test ? And yes i will make a back up first.

PS: i can also replace my launcher.dat without affecting my MenuHax or RXtools CFW ?

 

[d0k3]

Ok will do this in a hour, first have to eat something. I can just copy files to SDcard and test ? And yes i will make a back up first.

PS: i can also replace my launcher.dat without affecting my MenuHax or RXtools CFW ?

Don't worry, nothing bad will happen. I only recommend staying with the release versions, as this test build contains other changes, too. but in any case it will not wipe your system or anything like that .

You can replace the Launcher.dat all you like as long as you're not using the GW entry point for anything else. MenuHax doesn't use it, and rxTools does not either. Btw, unrelated, but already know about r3Tools?

 

[Deleted member 373223]

Don't worry, nothing bad will happen. I only recommend staying with the release versions, as this test build contains other changes, too. but in any case it will not wipe your system or anything like that .

You can replace the Launcher.dat all you like as long as you're not using the GW entry point for anything else. MenuHax doesn't use it, and rxTools does not either. Btw, unrelated, but already know about r3Tools?

it doesn't boot cfw on a9lh. (or do i need to put firmware.bin in the r3tools folder?)

 

[redunka]

Btw, unrelated, but already know about r3Tools?

I tried that few days ago. Very interesting project, actually.
Reboot patches in CFW part seems to be broken though, for both TWL/AGB and SSB4/MonHun.
Firmware files have to be in "firm" folder inside r3tools folder, similar to rxTools, but must be decrypted.
And I also can confirm that it doesn't boot from a9lh, judging by error - probably can't patch firms.

 

[NoGamer]

Okay, try this:
http://workupload.com/file/0o4pUpSG
Careful, this is a test build (although it should have no problems), so better just test if it runs and wait for the proper release.

If it runs, could you also test the most recent release versions of eitehr EmuNAND9 or GodMode9? I have a suspicion these two need the same fix.

It's seem to be CTRbootmanager. Also now it's not launching any app. All apps like HBL, Decrypt9WIP, emuNAND9, CHMM2, etc works fine from HBL in PastaMode SysNAND. So i have MenuHax to autoboot rxTools emuNAND, press select for CTR, press L for rxTools Menu and press R to boot regular SysNAND. So i boot holding select and CTR menu (purple one) is working, just wen i press a to launch any app it just hangs/freezes, have to do a hard reboot. So must i hold any button after opening a app from CTR or is there any other problem that can cause this.

Maybe there is a issue with my auto.3dsx file ? I use one from the guide of samiam144 and i see that the date of edit is different with your file, maybe try to replace that ? Normal it's boot.3dsx but i think sam changes the name to auto.3dsx and i have edit my ropbinpayload for it to use auto.3dsx instead of boot.3dsx.

 

[wurstpistole]

I just gotta ask now. Why is it that so many programs have a 9 in their name? Because they need arm9 to execute?

 

[Shadowtrance]

I just gotta ask now. Why is it that so many programs have a 9 in their name? Because they need arm9 to execute?

It started with the original Decrypt9 because it was the first xorpad generator to work on 9.x firmware way back when.
Then it just became a bit of a naming trend with other apps when d0k3 pretty much took over D9.

--------------------- MERGED ---------------------------

They also require arm9 to run so yeah i guess that's part of it too.

 

[jimmyleen]

Decrpyt9UI cia for anyone who cares to use it. (normal SD install, not nand).
https://mega.nz/#!jJAUmRKQ!bZwaBUV-0LgXIg4c2VAr7Y9dvwDzrmLUwqN6Z8UIUMM

The file is damaged it can't be extracted.

 

[d0k3]

It's seem to be CTRbootmanager. Also now it's not launching any app. All apps like HBL, Decrypt9WIP, emuNAND9, CHMM2, etc works fine from HBL in PastaMode SysNAND. So i have MenuHax to autoboot rxTools emuNAND, press select for CTR, press L for rxTools Menu and press R to boot regular SysNAND. So i boot holding select and CTR menu (purple one) is working, just wen i press a to launch any app it just hangs/freezes, have to do a hard reboot. So must i hold any button after opening a app from CTR or is there any other problem that can cause this.

I suggest you let @cpasjuste know. I had that problem in the past too (with CTR Boot Manager + D9), and maybe cpasjuste hasn't had the time to fix it yet.

 

[NoGamer]

I suggest you let @cpasjuste know. I had that problem in the past too (with CTR Boot Manager + D9), and maybe cpasjuste hasn't had the time to fix it yet.

Done. Just a question, i used the files from samiam144 guide and we have to change the ropbinpayload to load the auto.3dsx file instead of boot.3dsx (HBL) file. So must a also change the name of the boot.cfg file to auto.cfg file or doesn't that matter ?

 

[jimmyleen]

I suggest you let @cpasjuste know. I had that problem in the past too (with CTR Boot Manager + D9), and maybe cpasjuste hasn't had the time to fix it yet.

Same thing is happening to me. Is there any way to reverse this?

 

[Shadowtrance]

The file is damaged it can't be extracted.

No, it isn't. It's zipped the same way any other release is, with 7zip. So use 7zip.

 

[jimmyleen]

No, it isn't. It's zipped the same way any other release is, with 7zip. So use 7zip.

Even if I install it I won't be able to run it. For some unknown reason I can't run Decrypt9wip.3dsx, Emunand9.3dsx, or the cia version of Decrypt9.

Edit: not even the homebrelauncher.cia can run the homebrew apps.

 

[ItsMetaKnight]

@d0k3 Sorry again, but any news about boss decryption? I really hope it's going to be possible. *fingers crossed*

 

[jimmyleen]

Don't use EmuNAND Tool anymore... It is severely outdated by now. Use Multi EmuNAND Creator instead (even if you don't use multiple EmuNANDs). If you used most recent EmuNAND9 to create the EmuNAND, you can even use any disk imaging software to manage (backup/restore) your EmuNAND (such as this one).

Is there a version of the multi emunand creator that works on the 3ds?

 

[d0k3]

Is there a version of the multi emunand creator that works on the 3ds?

No, that's a PC tool.

@d0k3 Sorry again, but any news about boss decryption? I really hope it's going to be possible. *fingers crossed*

I have it on my list, but other stuff comes first. I won't look into BOSS files before the next release unless it is really, really simple to do.

 

[zeruel85]

Hello everyone! I have a problem dumping hs.app from sysnand.

When I launch Decrypt9WIP and try to dump Health&Safety app, it gives me this error:

Searching title "Health&Safety (N3DS)"...
Method 1: Search in title.db...
NAND CID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
TWL Customer ID: xxxxxxxxxxxx
0x03 KeyX: xxxxxxxxxxxxxxxxxxxx
0x03 KeyY: xxxxxxxxxxxxxxxx
0x05 KeyY: not set, slot0x05KeyY.bin not found
Method 2: Search in file system...
Failed!
Health&Safety Dump: failed!

Obviously I have slot0x05KeyY.bin in the root of SD card, but it is not detected anyway.

I have Cakes with a9lh. Thanks.