Hacking Devolution - Public Release

[XDel]

Is it possible to configure the controls? I ordered a MayFlash adapter, but it seems that Devolution does not match B to B, A to A, Y to Y and X to X. Fine for the Classic Controller Pro, but bad for May Flash thus preventing the use of GameCube controllers proper.

 

[Kikirini]

Hi,
awhile back I got most of my GC games to rip and verify in Devolution, except for Twilight Princess. It would always exit back to the homebrew channel whenver I tried to verify it. The disc was pretty scratched, though, so I chalked it up to that.
However, I just bought a pristine copy of Twilight Princess, re-ripped it, and I'm having the exact same issue again - I can't verify it.
Can anyone help? I just have no clue what could be causing it to not verify.

Edit: when I went back to my Wii U, I tried running the game and noticed that the light on the wiimote would start blinking, and would stay lit when I hit the home button, like what happens when I'm playing my other games. But the screen stayed black. It makes me wonder if the game verified, but something is weird while trying to run it.

Please let me know if I need to give any more info. I really would like to get this game running.

 

[alucard6768]

Im having the same problem with double dash i load it and it immediately goes back to the hbc no time at all to put in a disc.

 

[Sumea]

So I have to make this post requesting this again, as I recently learned Devolution had been updated to r200 (seriously, update that OP)
Devolution loader STILL does not seem to support video mode forcing.
This still is a distress to someone using RGB cable on european Wii, yet has imports because in any other case, I would be playing NTSC games in PAL60 mode - but with Devolution NAH.
The error is that the screen will be virtual boy shades of red and nothing else unless I can force PAL60 or alternitively just use composite cable. To someone who already used RGB for long - Composite is not that hot - but sure, I have that alternative as a backup for sure, I guess.
Yet, with Dios Mios the option of enforcing PAL60 is there. Using the actual disc from my Disc channel still boots the games in PAL60. So this problem is bit of "overlooking some user's needs"

Otherwise, amazing, tested the classic controller and dual shock 3 support - WHILE also using a GBA and GBA interfacing even still works, which is darn super. For all of that I thank Tued. I also would have liked to know about this update earlier but, I guess I just follow the wrong place, like, this thread for it.

 

[Brand Newman]

Hello everyone, I just joined this forum today because I wanted to see if someone else was experiencing the few problems I met with devolution (great homebrew anyway).

I'd like to know if some of you people had freezing problems occuring regularly, like I did : I'v read on an other post that "Oshtoby" did, so I posted a reply because I might have found out something interesting?

Unlike many of you (I guess), I'm not using devolution on my Wii U, but on the very same Wii I use to verify the discs : so I have a real gamecube memory card, and wasn't till recently using emulation for that.

Yet, it seems that using a real card could somehow cause these freezes, at least I haven't met one since I tried emulation, so I'd like people among you who own a real memory card to tell me if they've experienced problems too ?

If it happened to be a real thing, I suggest you use GCMM to save your data (just rename the raw file you created in your USB driver to memcard.bin, and paste it in the gc_devo folder, you'll get all your saved games back) : just let me know !

Best regards. (pardon me for my mistakes in English, I'm a foreigner)

 

[Carnage]

I cannot verifiy any game, t give me 10 blinks and back to HBC.
I started loggins as it's been very frustrating:

Wifi is ready
Devolution Engine r200 2013/07/05 18:29:22 Copyright (C) tueidj
AI clock configured (1c89657c)
Exception vectors placed.
MMU initialized.
IOS was reloaded (003a1820)
stm_eh_fd: 0
stm_imm_fd: 1
GPIO Flags: 00ff8080
IOS communication initialized.
Wiimote Rumble is ON
Starting to bring up network
HID FD: 2
OH1 FD: 3
hci_complete: stage 0, ogf 00, ocf 00, result 0
hci_complete: stage 0, ogf 03, ocf 03, result 0
hci_complete: stage 0, ogf 04, ocf 05, result 0
hci_complete: stage 0, ogf 03, ocf 24, result 0
hci_complete: stage 0, ogf 03, ocf 13, result 0
hci_complete: stage 0, ogf 03, ocf 1a, result 0
hci_complete: stage 0, ogf 03, ocf 0a, result 0
hci_complete: stage 0, ogf 03, ocf 33, result 0
hci_complete: stage 0, ogf 04, ocf 01, result 0
HCI Revision: 40a7
hci_complete: stage 0, ogf 04, ocf 09, result 0
Found stored link key for de:af:db:7a:1b:00
Found stored link key for 70:db:df:fd:19:00
hci_complete: stage 0, ogf 03, ocf 0d, result 0
hci_complete: stage 0, ogf 03, ocf 45, result 0
hci_complete: stage 0, ogf 03, ocf 47, result 0
hci_complete: stage 0, ogf 03, ocf 43, result 0
hci_complete: stage 0, ogf 3f, ocf 4f, result 0
hci_complete: stage 0, ogf 3f, ocf 4c, result 0
hci_complete: stage 1, ogf 3f, ocf 4c, result 0
hci_complete: stage 1, ogf 3f, ocf 4f, result 0
hci_complete: stage 1, ogf 03, ocf 03, result 0
hci_complete: stage 1, ogf 04, ocf 05, result 0
hci_complete: stage 1, ogf 03, ocf 24, result 0
hci_complete: stage 1, ogf 03, ocf 13, result 0
hci_complete: stage 1, ogf 03, ocf 1a, result 0
hci_complete: stage 1, ogf 03, ocf 0a, result 0
hci_complete: stage 1, ogf 03, ocf 33, result 0
hci_complete: stage 1, ogf 03, ocf 45, result 0
hci_complete: stage 1, ogf 03, ocf 47, result 0
hci_complete: stage 1, ogf 03, ocf 43, result 0
hci_complete: stage 2, ogf 03, ocf 24, result 0
hci_complete: stage 2, ogf 03, ocf 18, result 0
hci_complete: stage 2, ogf 03, ocf 13, result 0
HCI Init finished.
GETLINKSTATUS returned 1 (in progress)
GETLINKSTATUS returned 4 (wireless down)
IOCTL_NWC24_STARTUP returned 0 (0)
IOCTL_SO_STARTUP returned 0
Got negative IPC reply for 93227C80 (-1062720549)
Host IP Address: 192.168.43.219
net init result: 1 (4)
Network initialization succeeded
Socket number for log: 0
Result from FCNTL: 0
bind returned 0
sendto returned 14
USB FD: 5
Found 1 USB devices while searching for Mass Storage
Device 0: id e71f0021 VID 152D PID 2329
Device class 00, subclass 00, protocol 00
Number of configurations: 1
Configuration 1 has 1 interfaces
Interface 0 has 2 endpoints
Endpoint 81 Attributes 02 MaxPacket 0200
Endpoint 02 Attributes 02 MaxPacket 0200
Current device configuration: 1
Using config 1, interface 0, alt 0, ep_in 81, ep_out 02
USB Manufacturer: JMicron
USB Product ID: USB to ATA/ATAPI Bridge
USB Device Serial Number: 609130AFFFFF
USB device reset returned 8
Device MAX_LUN returned 9: 1
Cleared USB storage error status for LUN 0
emcard serial: 00000000 00000000 00000000
Memory card emulation activated (80)
Specified cluster for iso file: 004267FA
ISO file found: GALE Disc 1 Version 1
Disc Name: Super Smash Bros Melee
Checking file fat chain...
TSupported inquiry length: 36
Vendor ID "FUJITSU" Product ID "MHZ2160BH G2" Revision "" Type 00
LUN 0 is a Direct Access device
USB_MS sector size for LUN 0: 512, max LBA: 312581807
Using storage device: "USB FUJITSU MHZ2160BH G2 Rev ", serial 30AFFFFF
MBR partition offset: 0000003f
MBR partition offset: 00000000
MBR partition offset: 00000000
MBR partition offset: 00000000
Found a FAT partition at sector 63 (1)
Number of bytes per FAT entry: 4 (FAT32)
Sectors per cluster: 64 (32K)
FAT1 first sector: 114
FAT2 first sector: 0
Root cluster / sector: 2 / 38271
First Data sector: 38271
End sector boundary: 312576705
Total number of clusters: 4883413
Specified cluster for memcard file: 00431607
Cluster for MEMCARD file: 4396551 (281417407)
Checking file fat chain...
Break 512, 4397038(004317ee) does not follow 4396558(0043160e)
Total allocated size of file: 16777216 bytes in 32768 sectors
MEMCARD has 2 fragments
otal allocated size of file: 1459978240 bytes in 2851520 sectors
Result: 1 fragments
HID device change callback was registered
HID device change: 0 devices present
HID device change callback was registered
BT connection request (04 25 00)
SI slot 0 was assigned
BT0 was opened
BT0 device name: Nintendo RVL-CNT-01
Connection Complete (000b)
HCI cmd complete: 01 0b 00
Finding wiimote extension...
Extension ID: 0000A4200101
Classic Controller (original) found on BT0
Calibration was started
CNew WiFi channel: 6 (AFH_LO 21 AFH_HI 50)
HCI cmd complete: 03 3f 00
fatal error

I think it would be less frustrating if my games were rejected because for scratches marks, and a 4 blink led, but this 10 blinks give me no idea of what is happening. I have no problem with the disc as I can play them normally from the channel disc, but Devolution just give me fatal error, any idea why is this is happening?

 

[NotHere]

Hi.

Where can I find the latest version of this and a good guide on how to install it?

Thanks.

 

[Etheboss]

Hi.

Where can I find the latest version of this and a good guide on how to install it?

Thanks.

Did you try reading the first page of this topic? All info as well as the latest version should be there (note: ignore the version number, the link allways downloads the latest revision).

 

[NotHere]

Did you try reading the first page of this topic? All info as well as the latest version should be there (note: ignore the version number, the link allways downloads the latest revision).

Thanks. I did read, but since I saw the version.. i was not sure

Thanks.

 

[NotHere]

Question: I been reading this a few times and it says I have to have a 1:1 clean rip of my game. What if I make a rip in .ISO file but cant find my disk now. I have the .ISO file but no disk. Will it still work without verifying the disk?

Thanks.

 

[Kikirini]

Question: I been reading this a few times and it says I have to have a 1:1 clean rip of my game. What if I make a rip in .ISO file but cant find my disk now. I have the .ISO file but no disk. Will it still work without verifying the disk?

Thanks.

You absolutely have to have the disc in order to verify it.

 

[NotHere]

You absolutely have to have the disc in order to verify it.

ty for the info )

 

[tmv_josue]

Hey guys has anyone else had a problem were devolution works for anywhere between 1-30 minutes and then freezes or brings up an error message and then returns to the HBC. It also seems to loop the music for a few seconds and then the problem occurs and does this with all my rips. If anyone has any suggestions they are much appreciated and thanks in advance.

What storage device you are using? Try another.

 

[demi_du]

with devolution running on my wiiu , i can use wiiu pro controller, i can also use ps3 controller with a usb cable, but who can tell me how to use a ps3 contorller wireless?

a usb bluetooth dongle is connected to wiiu, but my ps3 controller is still not working? anyone please help me , please ...

 

[Maschell]

"PS3 controllers support two extra functions:
- L1 + R1: When the PS3 controller is connected to the wii via USB this will write the
wii's Bluetooth address to the controller's memory so it can be used wirelessly. This only
needs to be done once (until the address is overwritten).
- L3 + R3: Exit Devolution (performs the same function as pressing the power button)."

 

[WiinerMario]

tmv_josue Thank you that seems to have done the trick
I was using a 1TB toshiba hdd but now I am using a 128GB Sandisk SD and it is working fine. Weird because the hdd worked with my other Wii perfectly.

 

[naxil]

hey.. but the dev leave the project? is age r200 is out..

 

[the_randomizer]

hey.. but the dev leave the project? is age r200 is out..

I'm pretty sure the project is stagnant

 

[naxil]

a guy say to me: the project is finished...

 

[Vappy]

Is there even anything else he could've added to it? I thought it had practically perfect compatibility at this point.