1. Nyap

    OP Nyap HTML Noob
    Banned

    Joined:
    Jan 13, 2016
    Messages:
    971
    Country:
    Hi, I'm trying to use menuhax, ctrbootmanager and rxtools to make my 3ds boot into emunand if i turn it on holding the l button

    But when I select rxtools on ctrbootmanager, the top screen shows the rxtools logo thingy for a brief second, and then I just get a black screen. Rxtools works fine from the browser. I'm on o3ds 9.2

    plz help
     
  2. Xenosaiga

    Xenosaiga Time to switch it up
    Member

    Joined:
    Oct 9, 2015
    Messages:
    1,501
    Country:
    United States
  3. Nyap

    OP Nyap HTML Noob
    Banned

    Joined:
    Jan 13, 2016
    Messages:
    971
    Country:
    still black screen
    the config i set up:

    ;Comments starts with ";" or "#", so you need to remove it first to the
    ;line actually do something.

    ;[DEFAULT] is the option that is used if you don't press anything.
    ;This section is actually special, since what is defined in here will be
    ;the default for any other section (except for "payload" option, that is
    ;only valid per section).
    ;The options below are the defaults used internally in the application
    ;if you don't override them first. So even if you don't set those options
    ;(or if you forget to include this file in the root of your SD card), the
    ;options below are used.
    [DEFAULT]
    path = /rxTools/sys/code.bin
    delay = 100
    offset = 0x12000
    payload = -1

    ;Each key can be defined using a section, like the example below. Section
    ;names may have arbitrary caps. Valid keys (both O3DS and N3DS):
    ;KEY_A, KEY_B, KEY_SELECT, KEY_START, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT,
    ;KEY_R, KEY_L.
    ;Valid keys (N3DS only):
    ;KEY_ZL, KEY_ZR, KEY_CSTICK_RIGHT, KEY_CSTICK_LEFT, KEY_CSTICK_UP,
    ;KEY_CSTICK_DOWN.
    ;Directional keys (like KEY_UP) counts to both D-pad and circle pad.
    ;[key_L]
    ;path = /boot_something.3dsx

    ;The only option you need to set in the majority of the cases is 'path'.
    ;You may pass a .3dsx file or a .dat/.bin payload, the file type is detect
    ;automatically based on extension. Double check the path, since it must be
    ;correct (including caps).
    ;All the other ones are COMPLETELY OPTIONAL, since BootCtr uses SANE defaults
    ;when the option is not provided. So unless you know what you're doing, use
    ;the model below for the rest of the entries and ignore the rest of this
    ;file.
    [KEY_R]
    path = /boot_1.3dsx

    ;Now I will start explaining the advanced options, starting with delay. Delay
    ;is a number (in microseconds) to delay the application boot. Why this is
    ;important? It may improve the booting of CFWs.
    ;For example, O3DS autobooting with themehax, using either rxTools or
    ;CakesFW with Brahma2 loaders will have increased boot rate chance with 100
    ;ms of delay. For Homebrew Launcher (and other homebrews) the delay may be
    ;set to 0, however there is no need (100 ms of delay is nothing compared to
    ;the almost 5 seconds Homebrew Launcher itself needs to boot, for example).
    ;[KEY_A]
    ;path = /boot_hbl.3dsx
    ;delay = 100

    ;Instead of loading .3dsx files, you can use ARM9 payloads like rxTools'
    ;code.bin or CakesFW's Cakes.dat. By default it will try to detect if the
    ;file is a payload by checking the extension (.bin or .dat), however you can
    ;force by passing "payload = 1" (passing "payload = 0" forces homebrew mode,
    ;while "payload = -1" forces autodetect).
    ;You may need to change the default payload offset depending of the binary
    ;you're loading. Offset of 0x12000 is the default for RxTools/CakesFW.
    ;Don't worry about setting offset option in .3dsx files, it is ignored.
    ;[KEY_START]
    ;path = /rxTools/sys/code.bin
    ;payload = 1
    ;offset = 0x12000
     
  4. Xenosaiga

    Xenosaiga Time to switch it up
    Member

    Joined:
    Oct 9, 2015
    Messages:
    1,501
    Country:
    United States
    [DEFAULT]
    path = /rxTools/sys/code.bin
    delay = 100
    payload = 1
    offset = 0x12000

    Payload should be 1 instead of -1

    Also make sure your file path is correct. Make sure each letter is correct.

    If that doesn't work then I will include my config file for you to try.

    Also make sure you are using release 1.2.1

    https://github.com/m45t3r/BootCtr/releases/tag/v1.2.1
     
  5. Nyap

    OP Nyap HTML Noob
    Banned

    Joined:
    Jan 13, 2016
    Messages:
    971
    Country:
    Now I get the rxtools logo on the top screen again but other than that, still stuck on a black screen
     
  6. Xenosaiga

    Xenosaiga Time to switch it up
    Member

    Joined:
    Oct 9, 2015
    Messages:
    1,501
    Country:
    United States
    Idk. Try a delay of 150?

    Other than that idk. Don't have any experience with o3ds. Sorry
     
  7. Nyap

    OP Nyap HTML Noob
    Banned

    Joined:
    Jan 13, 2016
    Messages:
    971
    Country:
    ok
     
  8. Nyap

    OP Nyap HTML Noob
    Banned

    Joined:
    Jan 13, 2016
    Messages:
    971
    Country:
    bumpty bump
    sorry if that's against the forums rules I'm just desperate to get this fixed
     
  9. Nyap

    OP Nyap HTML Noob
    Banned

    Joined:
    Jan 13, 2016
    Messages:
    971
    Country:
  10. NoNAND

    NoNAND Give me back my legions!
    Member

    Joined:
    Aug 22, 2015
    Messages:
    2,199
    Country:
    Albania
    I think the problem is with the 2.5 hax not your rxtools.
     
  11. Luxocell

    Luxocell Member
    Newcomer

    Joined:
    Jun 6, 2010
    Messages:
    24
    Country:
    Cote d'Ivoire
    Try re installing RxTools? Also, try with another SD card (inject the emunand there), a friend of mine had a similar (similar) issue and he solved it by using a different SD card

    Sorry I can't help further
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - [CTRbootmanager]Rxtools, Screen, Black