- Status
Looks great but I keep geeting a corrupted pointer with 3d covers, anyone else? Keep up the good work.
I saw on the Google Code page that there's a max of 70 covers for 3d, so there's an option for 2d. I was wondering if a third option would be best- if it would be possible to only display the front and side of the 3d cover, and then the back of it could just be left blank (and of course 2 would no longer flip the box over either). Would that free up enough memory to give around double the amount of games supported?
I was wondering why my bandwidth usage on my boxart site jumped from 600 gigs to 800 gigs in 2 days .. everyone is downloading both.aireca said:
dlxowhd said:
It will be down to having too many games, dont think the wii memory can hold anymore than 70 3d covers at the moment, not sure if they can optimize the code at a later date.
Ive currently got 60 games and the 3d covers are working fine with this amount.
I just grabbed RC4 and here are my first findings:
- The version string in the application is wrong, it shows R472 RC3
- The settings menu is not properly lined out.
- As mentioned in other posts the download logic for 2D/3D covers is swapped.
Here I ran into a 1 time (?) problem: I had to grab the covers while the loader was in 2D mode,
after that I switched to 3D mode and the loader exited to the HBC.
I restarted the loader and switched to 3D mode again, everything was fine.
I hope this is understandable
- I'm using the white theme, maybe it would be nice to use a white outline font for the game titles.
The black font doesn't fit quite in.
Also could some dev look to the comment mentioned here:
This is a disadvantage of googlecode imho, since only devs can reopen issues.
But this loader is really turning in a nice gem!
Keep up the good work.
- The version string in the application is wrong, it shows R472 RC3
- The settings menu is not properly lined out.
- As mentioned in other posts the download logic for 2D/3D covers is swapped.
Here I ran into a 1 time (?) problem: I had to grab the covers while the loader was in 2D mode,
after that I switched to 3D mode and the loader exited to the HBC.
I restarted the loader and switched to 3D mode again, everything was fine.
I hope this is understandable
- I'm using the white theme, maybe it would be nice to use a white outline font for the game titles.
The black font doesn't fit quite in.
Also could some dev look to the comment mentioned here:
TheGlade said:
This is a disadvantage of googlecode imho, since only devs can reopen issues.
But this loader is really turning in a nice gem!
Keep up the good work.
i have a little question to rc4
where is the option to turn on 3d covers?
i deletet all my covers on the sd card than i was in the loader in options and graphics options but i dont see anytghing about 2d/3d
where is the option to turn on 3d covers?
i deletet all my covers on the sd card than i was in the loader in options and graphics options but i dont see anytghing about 2d/3d
Go to the settings menu and click on the OK button behind The option Graphics.Meannekes said:
This is not entirely logical, if the button had the label "More..." more people would find it
Hi all,
Got a bit of a prob.
Currently using RC3 and all was working fine with a few glitches installing certain games.
However, also using WBFS manager on my PC I wanted to be able toi transfer ISO's across, unfortunately this wasn't recognising my Hard Disk so I re-formatted it and it now works with WNFS manager perfectly. It also works when loading games through CoverFlow fine, BUT, when I try and install games there's always a problem. I'm trying to install my store bought games and they randomly freeze at different points through installation. I'm wondered if this is a fault with my Hard Disk or Coverflow? As they seem to stop at different points in the installation at completely different times would this indicate it's a Hard disk issue? It was working, despite a few hiccups with certain games, fine before it's just become a problem after formatting.
It's quite an old Hard Disk in a caddy so was going tp upgrade regardless, but thought I'd check here first as don't want it doing this with the new WD one I plan to buy!
Cheers
Got a bit of a prob.
Currently using RC3 and all was working fine with a few glitches installing certain games.
However, also using WBFS manager on my PC I wanted to be able toi transfer ISO's across, unfortunately this wasn't recognising my Hard Disk so I re-formatted it and it now works with WNFS manager perfectly. It also works when loading games through CoverFlow fine, BUT, when I try and install games there's always a problem. I'm trying to install my store bought games and they randomly freeze at different points through installation. I'm wondered if this is a fault with my Hard Disk or Coverflow? As they seem to stop at different points in the installation at completely different times would this indicate it's a Hard disk issue? It was working, despite a few hiccups with certain games, fine before it's just become a problem after formatting.
It's quite an old Hard Disk in a caddy so was going tp upgrade regardless, but thought I'd check here first as don't want it doing this with the new WD one I plan to buy!
Cheers
RC4 is awesome with the full covers! I do hope the corrupted pointer gets sorted out quickly (86 games here). Keep up the good work!!!
I've never tried. It seems like it wouldn't be too hard. Maybe I'll get the time to dig into this soon, I'd love to have to pointer fixed.
try clicking d/l 2d covers. I think the d/l buttons are in the wrong places (2d is for 3d and 3d is for 2d)
QUOTE said:
Should have fixed what exactly? I asked a couple of questions.
Do you mean the freezing up etc. and 'r482' are you referring to another loader - Ultimate USB ?
has anyone tried RC4 on cios rev12 yet? I know this loader had issues with rev 9, does everything work okay on rev 12?
- Status
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
@ x65943:
If your throat closes, putting oxygen in your mouth will not solve anything - as you will be introducing oxygen prior to the area of obstruction -
-
You either need to be intubated to bypass obstruction or create a stoma inferior to the the area of obstruction to survive
-
-
-
-
-
-
-
-
@
JuanMena:
It was waiting for you to order another one.
Seems like, your PSU was waiting for a partner. -
-
-
-
-
-
-
-
