Completely remove and reinstall Atmosphere

[braska]

Hi guys, i have a question for you, i hope that someone will help me

Unfortunately i'm stuck on the error

Panic occurred while running Atmosphere Title Id: 010000000000002B Error: std:: abort (0xFFE)

i've tried every solution find in web, also mounting emuNAND with Nx Nand Manager and deleting file located in /saves/80000000000000d1, but nothing changes.

This problems lasts from almost 2 months, so i'm tired now and i decided to delete all and reinstall again all things, creating a new emuNAND and installing Atmosphere from zero, i don't care for data loss, i'll restart all the games.

Now the question is: how can i delete all and proceed to a new fresh Atmosphere installation with emuNAND?

Thanx for anyone Who Will help me

 

[urherenow]

to uninstall Atmosphere, you delete the Atmosphere folder from your SD card. You might want to save all of your config files first, unless you want to create those from scratch again as well. Although, that isn't a bad idea to redo your settings using the examples. Please read here: https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/features/configurations.md

Also, you never mentioned what version your OFW is. Since you're recreating your emummc from scratch again, I would hope you installed the latest firmware first, and don't enable nogc in Atmosphere or hekate. If you aren't already at the latest, boot back into OFW after installing the latest, before you create your emummc.

 

[braska]

Sorry, you're right, i'm on 14.1.0.
So, need i to update to latest firmware first from sysNAND?

EDIT: i tried to boot the sysNAND but i have the same error screen! How can i update the firmware?

EDIT 2: after backed up all files in my pc i've formatted sd using Hekate, then i've used https://www.sdsetup.com/ to create files for my sd, then i've injected hekate payload and launched CFW from sysMMC but again the same error message.
What can i do? i thought that wiping sd and put new atmosphere files would solve..

 

[eyeliner]

Versions of what you are using can help.

 

[urherenow]

You said you deleted the erpt_sysmodule save in emunand... did you repeat the step for sysnand? IF the error exists in OFW, then you shouldn't be surprised that it's still there when making a new emummc (which is a 1:1 copy of your emmc).

Withoout going back and reading everything, didn't you also state that you don't care about lost games/data? If that's the case, you can also try resetting to factory defaults.

https://www.nintendo.co.uk/Support/Nintendo-Switch/How-to-Restore-the-Nintendo-Switch-Console-to-Factory-Settings-while-in-Recovery-Mode-1984303.html#:~:text=With the console turned off,Select “Restore Factoy Settings".

Or you could read through this issue first: https://github.com/Atmosphere-NX/Atmosphere/issues/1776.

 

[braska]

Versions of what you are using can help.

Sure,

Fw 14.1.0
Atmosphere 1.5.2
Nyx 1.5.3
Hekate 6.0.3

What else?

You said you deleted the erpt_sysmodule save in emunand... did you repeat the step for sysnand? IF the error exists in OFW, then you shouldn't be surprised that it's still there when making a new emummc (which is a 1:1 copy of your emmc).

Withoout going back and reading everything, didn't you also state that you don't care about lost games/data? If that's the case, you can also try resetting to factory defaults.

https://www.nintendo.co.uk/Support/Nintendo-Switch/How-to-Restore-the-Nintendo-Switch-Console-to-Factory-Settings-while-in-Recovery-Mode-1984303.html#:~:text=With the console turned off,Select “Restore Factoy Settings".

Or you could read through this issue first: https://github.com/Atmosphere-NX/Atmosphere/issues/1776.

How can i see syNand System folder?
In Hekate payload, in Tools -> USB Tools i see this two (see the photo) and i tried to delete that file in both.

 

[urherenow]

the posted thread links tell you how to do this (nxnandmanager, and read the front page for pretty simple instructions: https://github.com/eliboa/NxNandManager). As this isn't the noob thread, I don't expect to have to spoon-feed you every little detail. Sorry. For simplicity, grab the latest biskeydump from here: https://switchtools.sshnuke.net/, although I don't think it actually dumps anything that Lockpick_RCM doesn't. But maybe Lockpick dumps too much and will yell at you for unrecognized keys, even though you have everything you need. Been so long since I've used it.

 

[braska]

the posted thread links tell you how to do this (nxnandmanager, and read the front page for pretty simple instructions: https://github.com/eliboa/NxNandManager). As this isn't the noob thread, I don't expect to have to spoon-feed you every little detail. Sorry. For simplicity, grab the latest biskeydump from here: https://switchtools.sshnuke.net/, although I don't think it actually dumps anything that Lockpick_RCM doesn't. But maybe Lockpick dumps too much and will yell at you for unrecognized keys, even though you have everything you need. Been so long since I've used it.

Sorry i didn't understand. I followed the GitHub issue that you linked, deleting that file, mounting both eMMC RAW GPP (sysNand) and emu RAW GPP (emuNAND) (obtaining key for Nand Manager with Lockpick) but nothing changed. I guess i need to restore factory defaults than, Will i be able to reinstall Atmosphere?

 

[eyeliner]

Does your official, untouched NAND work OK?

 

[braska]

Does your official, untouched NAND work OK?

How can i boot che original NAND? Is It sysNAND in launch options?

 

[impeeza]

you can try:

https://gbatemp.net/threads/panic-o...atmosphere-title-id-0100000000000002b.591345/

Post automatically merged: Apr 20, 2023

and:

https://github.com/Atmosphere-NX/Atmosphere/issues/1776

 

[eyeliner]

How can i boot che original NAND? Is It sysNAND in launch options?

Just don't use atmosphere?

 

[braska]

I mean, when i launch Hekate payload, in menu i find Launch with some options. To launch original NAND which option i have to select?

Post automatically merged: Apr 20, 2023

you can try:

https://gbatemp.net/threads/panic-o...atmosphere-title-id-0100000000000002b.591345/

Post automatically merged: Apr 20, 2023

and:

https://github.com/Atmosphere-NX/Atmosphere/issues/1776

Already done but it didn't solved

 

[Hayato213]

Your sysnand boot?

 

[braska]

Your sysnand boot?

No, same error

 

[impeeza]

and if you start on safe mode?

Please tell us you have a functional NAND Backup!

 

[Hayato213]

fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

This boot stock

 

[braska]

fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

This boot stock

My hekate_ipl is still like this

and if you start on safe mode?

Please tell us you have a functional NAND Backup!

maybe i have but i think is outdated (more than one year ago), is it a problem?

 

[impeeza]

fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp

This boot stock

yeap on you Hekate_ipl.ini file create a option to boot OFW.

Post automatically merged: Apr 20, 2023

My hekate_ipl is still like this


maybe i have but i think is outdated (more than one year ago), is it a problem?

no for the worst case scenery you will need to restore a functional NAND and start from it.

 

[braska]

yeap on you Hekate_ipl.ini file create a option to boot OFW.

I already have an option for OFW, named STOCK, with parameters set like yours.

If i launch it, i have the same error

Post automatically merged: Apr 20, 2023

I found my nand backup, i'm trying to restore it from Hekate menu