Hacking Cant read nand from coolrunner QSB

[Daak]

Corona v2 4gb​

Oct 21 2011​

Dash: 2.9.16203.0​

Liteon 1175​

J-Runner 0.3 Beta​

Hi​

Im trying to read my nand but no devices are shown in J-runner​

​

Its probable that its my solder job that causes it not to be recognized as a drive but I want to rule out anything else.​

​

What state does the xbox have to be in to read the nand?​

I know it has to be plugged in but I havent attached the front panel power button riser (whatever its called). Does that matter? Does it need anything other than power, like cables/drives?​

​

To read the nand I just hit read nand and select the mobo version, then select the drive (when it finally shows) then read. Right?​

​

Thanks​

 

[DinohScene]

Please fix your font colours.
It's barely readable.

Only thing you need is plug the PSU into the wall plug and in your 360.
DO NOT POWER IT ON!

If it's not recognized, then you messed up your soldering

 

[Daak]

Please fix your font colours.
It's barely readable.

Only thing you need is plug the PSU into the wall plug and in your 360.
DO NOT POWER IT ON!

If it's not recognized, then you messed up your soldering

So I dont need the front panel power button riser?

 

[DinohScene]

No you don't need anything else connected at all.
Just the PSU in the wall socket and in the console.

 

[Daak]

Thanks man, guess I have some soldering to redo

 

[DinohScene]

No prob ;]

Try straight wires instead of QSB's.
Lot less to go wrong.