Hacking Question Boot Atmosphere With Mod Chipped Switch

[shmadul]

I have a Switch That I installed a trinket M0 inside of, which currently sends the SXOS payload, my question is there anyway I can have it boot the Atmosphere CFW without manually going in and selecting boot external payload, reflashing the trinket is not really an option as I had to remove the Micro USB connector to install it inside of the switch.
Thanks

 

[Hayato213]

Get an Atmosphere UF2 file use that instead of the Hekate UF2 file if you don't want to boot into the bootloader first then selecting a payload.

 

[Relys]

Flash your modchip with Simple UF2: https://gbatemp.net/threads/modchip...switchboot-save-fuses-without-autorcm.526607/

Install Kosmos on your SD card: https://github.com/AtlasNX/Kosmos

 

[shmadul]

Flash your modchip with Simple UF2: https://gbatemp.net/threads/modchip...switchboot-save-fuses-without-autorcm.526607/

Install Kosmos on your SD card: https://github.com/AtlasNX/Kosmos

Thanks This Was extremely Helpful, I didnt think about the fact that the Data lines could be accessed via the USB C port on the switch

 

[hippy dave]

Sounds like you're reflashing your chip after all, but if you didn't want to, you could use the SX Gear boot.dat, and use atmosphere's fusee-primary.bin as payload.bin to be chainloaded.

 

[Kubas_inko]

There is also a chainloader called argon (which you can flash onto your modchip). Pretty good project tbh.

 

[mattytrog]

Sounds like you're reflashing your chip after all, but if you didn't want to, you could use the SX Gear boot.dat, and use atmosphere's fusee-primary.bin as payload.bin to be chainloaded.

I think SX gear is still broken. When I was dealing with the 0 folder "system", SX gear could not load fusee_primary.

Hwinit problem I think.

 

[hippy dave]

I think SX gear is still broken. When I was dealing with the 0 folder "system", SX gear could not load fusee_primary.

Hwinit problem I think.

Oh ok, nm then
Oh yeah, so the other method was to use one of those scripts to convert fusee-primary.bin to your own boot.dat - I haven't kept track of whether those scripts still work either tho.