Hacking Blue screen after hardmod?

[lpoolm]

hopefully will get an answer as i have searched and still struggling to find someone else with this issue.
hardmodded an old 3ds, followed the guide on this forum for the hardmod side then followed the 3dsguide for the software side.
after a few attempts i got the hardmod done, got my blue error screen, connected to laptop and showed up!! backed up the nand a few times then followed the guide to add the relevant files and amend the nand etc.
all seemed fine flashed patched-nand to 3ds added sd card back in. turned on and still have the same blue error screen?
i have unsoldered the the sd card adapter but still have the 4 wires connected to the 4 solder points on the motherboard (all soldered to a board so no shorts) but do i need to unsolder from the pads, could this be an issue?
if the clk pad wasnt such a bugger to solder to i would have tried by now but didnt want to incase it was not necessary?
any advice would be great thanks.

 

[Kubas_inko]

Show us the code.
did you checked if the nand is ok?
no, the wires are not the issue, but you can try to unsolder them (maybe it will help)

 

[lpoolm]

Bootrom 8046
errcode: 00F800FF
DEDEFFFF FFFFFFFF
00000000 0000000

Thanks for the quick reply.

when i copied the nands i ran them on the nand checker and all ok.

 

[Kubas_inko]

WTf am i wirting here. Sorry

 

[ov3rkill]

Check this out for the error you have.

http://3dbrew.org/wiki/Bootloader

 

[Alex4U]

Bootrom 8046
errcode: 00F800FF
DEDEFFFF FFFFFFFF
00000000 0000000

Thanks for the quick reply.

when i copied the nands i ran them on the nand checker and all ok.

Make sure you have restored the NAND. did you already do that?

 

[Kubas_inko]

just wanted to show him

--------------------- MERGED ---------------------------

Try restoring your NAND (upload your nonedited NAND back)

 

[Alex4U]

I think your NAND is corrupted. try restoring again.
Make sure also you have correctly soldered the pins on your 3DS Motherboard.
3DS Hardmod is patched since 11.3 i think.

 

[Kubas_inko]

3DS Hardmod is patched since 11.3 i think.

What do you mean by that?

 

[Alex4U]

What do you mean by that?

Yeah, Nintendo patched hardmod in 11.3. Backup is not patched in hardmod, but modification or restoration in hardmod is patched.

 

[Kubas_inko]

Yeah, Nintendo patched hardmod in 11.3. Backup is not patched in hardmod, but modification or restoration in hardmod is patched.

Nope. You can hardmod 11.4 . I have done it on my N3DSXL an O2DS

 

[Alex4U]

Nope. Thats why you can hardmod 11.4

wait, what.
Hardmod wasn't patched in 11.3?
how?

 

[Kubas_inko]

wait, what.
Hardmod wasn't patched in 11.3?
how?

It can't be patched (because system needs to write to NAND). That's why is it called hardmod

 

[Alex4U]

It can't be patched (because system needs to write to NAND). That's why is it called hardmod

but i readed some time restore nand was patched. backup was only allowed in 11.3
you're confusing me .W.

 

[Kubas_inko]

but i readed some time restore nand was patched. backup was only allowed in 11.3
you're confusing me .W.

Idk where you read it, but they can't do that via sysupdate (I think it is hardware related). That's why hardmod cant be patched.

 

[Alex4U]

Idk where you read it, but they can't do that via sysupdate (I think it is hardware related). That's why can'tmod cant be patched.

oh i see

 

[gamesquest1]

but i readed some time restore nand was patched. backup was only allowed in 11.3
you're confusing me .W.

Idk where you read it, but they can't do that via sysupdate (I think it is hardware related). That's why hardmod cant be patched.

it was patched....at least the original methodology was s to overwrite the new FIRM with an exploitable version), but with the release of sighax, hardmod sighax installs are unpatchable

 

[Kubas_inko]

it was patched....at least the original methodology was, but with the release of sighax, hardmod sighax installs are unpatchable

So we were both right

 

[Alex4U]

so i was right, right? lol

 

[lpoolm]

right, sorry for the delay.
so i reinstall the original nand turn it on and it goes to luna3ds v7.1
i tried my patched-nand again and same issue? i assume my patched nand is not set up properly?