Hacking Big Problem with a possible Brick on New 3ds XL

[MrVtR]

Hi everyone,My friend and I are trying to fix a possible brick on his 3ds. Our initial situation is this kind of bug:
We tried to do Ctrtransfer and NAND Restore,but or appears after finishing the process the image 1,or image 2 or black screen without audio or black screen with audio.We did Ctrtransfer to 11.5,9.2 and 2.1 with and withou CFW and with decrypt9 and godmode9.
After this(like our last hope),we did Lazarus3ds and after this,nothing,the result was black screen without audio,he tried more times Ctrtransfer,when he finished the 2.1 ctrtransfer and searched more about the 2.1,he discovered that we have to remove the SD Card before turn on the 3ds on 2.1(I always forgot this instruction). The Result is this video:
The blue led turns up and after off.

Now we are stuck in any ctrtransfer and on the github of Lazarus 3ds says that: "Uninstalling CFW will render the console unable to boot once more"

Anyone have ideas to get the 3ds back to normal?

 

[MrVtR]

Edit 1:

image upload gave error, I did it again

 

[BvanBart]

Do you have a flashcard that you can use for NTRBoot? That way you can boot it up and advance from there.

 

[MrVtR]

@b4

Do you have a flashcard that you can use for NTRBoot? That way you can boot it up and advance from there.

I did all the process with ntrboothax,CFW Instalation,CTRTransfer and NAND restore too

 

[BvanBart]

@b4

I did all the process with ntrboothax,CFW Instalation,CTRTransfer and NAND restore too

But when you just install the CFW... can it boot then? Go step by step not everything at once.

 

[MrVtR]

But when you just install the CFW... can it boot then? Go step by step not everything at once.

With the CFW,the 3ds don't boot anymore(in all versions),we tried do only the CFW Installation step by step

 

[TurdPooCharger]

Did you do a (Full) sysnand restore and not the (Safe) one?

 

[KunoichiZ]

The 3DS can't find the boot.firm or the arm9loaderhax.bin file on your SD card or CTRNAND. That's why the light blinked on then immediately off (in the second video)

 

[MrVtR]

Did you do a (Full) sysnand restore and not the (Safe) one?

Both we tried

--------------------- MERGED ---------------------------

The 3DS can't find the boot.firm or the arm9loaderhax.bin file on your SD card or CTRNAND. That's why the light blinked on then immediately off (in the second video)

But when you we restore in decrypt9 with lazarus,we remove the CFW,the luma chainloader disappears with that,it's really the arm9loaderhax.bin or boot.firm even without the cfw?

 

[TurdPooCharger]

Damnit I hate stating this. Have you tried removing both your SD card and battery, reinsert battery, and then boot the 3DS without SD card?

 

[MrVtR]

Damnit I hate stating this. Have you tried removing both your SD card and battery, reinsert battery, and then boot the 3DS without SD card?

In a specific firmware or any FW?

 

[Tomobobo]

Damnit I hate stating this. Have you tried removing both your SD card and battery, reinsert battery, and then boot the 3DS without SD card?

I ran into the same problem as OP, and only removing the battery for 10-15 mins would solve the issue, I hope it works out for him too.

 

[MrVtR]

I ran into the same problem as OP, and only removing the battery for 10-15 mins would solve the issue, I hope it works out for him too.

Thanks,I will try this ^^

 

[TurdPooCharger]

In a specific firmware or any FW?

Any firmware should do. Newest available if you feel like it.

 

[MrVtR]

Any firmware should do. Newest available if you feel like it.

Ok,I will try this and inform if works

--------------------- MERGED ---------------------------

Ok,I will try this and inform if works

Nope,didn't work,I got black screen with audio on 11.5 without CFW

 

[TurdPooCharger]

Nope,didn't work,I got black screen with audio on 11.5 without CFW

What happens when you try going into Recovery Mode?
https://www.3dbrew.org/wiki/Recovery_Mode
Do the screens work there?

Edit - Make sure you have no SD card inserted at this moment.

 

[MrVtR]

What happens when you try going into Recovery Mode?
https://www.3dbrew.org/wiki/Recovery_Mode
Do the screens work there?

With cfw the screen appears,we can update,but after this,the result is black screen,without CFW,the recovery menu doesn't work

 

[Quantumcat]

Have you tried the Lazarus script? You mentioned it, but you also mentioned decrypt9 which has nothing to do with it so I'm wondering if you did do it

 

[TurdPooCharger]

Have you tried the Lazarus script? You mentioned it, but you also mentioned decrypt9 which has nothing to do with it so I'm wondering if you did do it

Following up what @Quantumcat said. Did you used these instructions
https://github.com/AnalogMan151/Lazarus3DS

 

[MrVtR]

Have you tried the Lazarus script? You mentioned it, but you also mentioned decrypt9 which has nothing to do with it so I'm wondering if you did do it

Yep,I tried Lazarus3ds,the result was black screen too without audio,I turn off the 3ds,when I turn on again,the result was black screen with audio . I mentioned Decrypt9 too because after this I tried to restore nand and didn't works too

--------------------- MERGED ---------------------------

Following up what @Quantumcat said. Did you used these instructions
https://github.com/AnalogMan151/Lazarus3DS

I don't have the files to do this,I get all on youtube(Yakara,I don't like to follow videos,but it was the only way to get the files that I know :v )

--------------------- MERGED ---------------------------

I ran into the same problem as OP, and only removing the battery for 10-15 mins would solve the issue, I hope it works out for him too.

Didn't work too,unfortunately :/