B point issue after modding Switch OLED

[Wyte47]

I have the same issue though slightly different. the diode closest to the b point only gives me a reading on one side but the side closer to the b point gives me 0V. Any ideas?

 

[BullsOfLime]

I have the same issue though slightly different. the diode closest to the b point only gives me a reading on one side but the side closer to the b point gives me 0V. Any ideas?

I have the same behaviour. Did you try installing the board and see if it works?

Edit:// Having the same issue, but the installation works perfectly!

 

[randy_w]

B point diode reading is around 1-2V, some multimeters won't even register and will show ol instead.

 

[Wyte47]

I have the same issue though slightly different. the diode closest to the b point only gives me a reading on one side but the side closer to the b point gives me 0V. Any ideas?

I forgot to reply back to this I had fixed the issue which interestingly enough it had something to do with the connection on the processor and the ribbon, after reapplying some time to this area and the B point I got everything working. One thing I realised fortunately the Board shorts out but there wasn't full contact with the ribbon and the processor.

 

[Yissouf]

Does it beep on diode mode or only shows 0?
Some Multimeter does not show readings on point B, so if you have no beep it should be good.

Hi please I need your help my b point is beeping how can I solved it