Last try before i went to bed was a a9lh booting console.did you got it to work ? ^^ or no such luck ?
Last try before i went to bed was a a9lh booting console.did you got it to work ? ^^ or no such luck ?
Also @ noobs ... if you can't build this yourself then you probably don't need it! (just my opinion).
Well said. Totally agree. Unless you're a nut like me then wait. hahaI don't particularly consider myself a noob, but I'd tend to agree with this. Better to wait till there's more safety measures in place, or at LEAST until there's actually a GOOD reason to dump it before jumping the gun and potentially making yourself a rather expensive paper weight.
On the same boat as you. Hardly use the 3ds though so I could wait for as long as it takesFor now yes. It's just waiting for one. The vtp is working so it's ready.
Yep, now to fix payload generation on Linux...Ahh that. Me and @dark_samus3 were trying to fix the mess that is the installer to load the files from sd, hence a buttload of bricks ensued in the process. haha
samee idk which one do i replace that offset too or no@Shadowtrance
im reading this guide: https://github.com/Plailect/OTP/blob/master/New_3DS_Spider.md
and i have some question...
section 1 looks like brick is not going to happen cuz its a Preparation only.
--------------------------------------
the thing i cannot understand is the section 2 #20
it says ""20. Select everything from offset 0x200 to the beginning of the file."
so it means im going to 0x200 and highlight the ABOVE contens and repalce it with the contents of NCSD_header_o3ds.bin.
or
highlight the BELOW contens and repalce it with the contents of NCSD_header_o3ds.bin?
thanks and have a nice day...
Everything from 200 and above. Make sure to Paste Write and not Paste Insert.@Shadowtrance
im reading this guide: https://github.com/Plailect/OTP/blob/master/New_3DS_Spider.md
and i have some question...
section 1 looks like brick is not going to happen cuz its a Preparation only.
--------------------------------------
the thing i cannot understand is the section 2 #20
it says ""20. Select everything from offset 0x200 to the beginning of the file."
so it means im going to 0x200 and highlight the ABOVE contens and repalce it with the contents of NCSD_header_o3ds.bin.
or
highlight the BELOW contens and repalce it with the contents of NCSD_header_o3ds.bin?
thanks and have a nice day...
From 0x0 to 0x200so it means im going to 0x200 and highlight the ABOVE contens and repalce it with the contents of NCSD_header_o3ds.bin.
or
highlight the BELOW contens and repalce it with the contents of NCSD_header_o3ds.bin?.
thes makes it very cleaar :-)From 0x0 to 0x200
use the browser to load decrypt9 (the files are above) and restore the NAND from the SD cardthes makes it very cleaar :-)
--------------------- MERGED ---------------------------
once im on 2.1 and i need to go back to 9.2... what process should i do...
-im on n3ds
-no hardmod
I did it on the first try on a non hardmodded N3DS without any bricks... And I don't have CN.20+ for Shadowtrance (with hardmod)
5 or 6 for me (with hardmod)
5 or 6 for gelex ( with hardmod)
so... yeah
Some of us are just chicken... like meI did it on the first try on a non hardmodded N3DS without any bricks... And I don't have CN.
(https://gbatemp.net/threads/otp-guide.415140/page-22#post-6084509)
So... You guys must be doing something wrong.
@Shadowtrance
im reading this guide: https://github.com/Plailect/OTP/blob/master/New_3DS_Spider.md
and i have some question...
section 1 looks like brick is not going to happen cuz its a Preparation only.
--------------------------------------
the thing i cannot understand is the section 2 #20
it says ""20. Select everything from offset 0x200 to the beginning of the file."
so it means im going to 0x200 and highlight the ABOVE contens and repalce it with the contents of NCSD_header_o3ds.bin.
or
highlight the BELOW contens and repalce it with the contents of NCSD_header_o3ds.bin?
thanks and have a nice day...
I guess that if you don't understand it... you shouldn't try it (or at least, not yet.)samee idk which one do i replace that offset too or no
How did you upgrade to 9.2 from 2.1?I did it on the first try on a non hardmodded N3DS without any bricks... And I don't have CN.
(https://gbatemp.net/threads/otp-guide.415140/page-22#post-6084509)
So... You guys must be doing something wrong.
There Should be a Decrypt9 Payload through SpiderHow did you upgrade to 9.2 from 2.1?
How did you upgrade to 9.2 from 2.1?
No, my bricks were (i guess) deliberate when me and @dark_samus3 were testing fixing the installer for a9lh.I did it on the first try on a non hardmodded N3DS without any bricks... And I don't have CN.
(https://gbatemp.net/threads/otp-guide.415140/page-22#post-6084509)
So... You guys must be doing something wrong.
But the installer is already working properly ? it's just that the 3DSX is packed with everythingNo, my bricks were (i guess) deliberate when me and @dark_samus3 were testing fixing the installer for a9lh.