Hacking Adrenaline v3 Released!

[Sonic Angel Knight]

I tried this one psp emulator for snes called snex9x is supposed to be high memory mode homebrew and it doesn't load, neither does the gpsp kai 3.4 emulator

 

[stark89]

[Quote = "dimmidice postale: 7246198, Membro: 198704"] Stai mettendoli All'interno di Una cartella con il proprio ID? es SCU-94163 [/ QUOTE]

Has anyone gotten PS1 games to work? I get the same error as this guy:

i tried at change base game in ape quest but nothing psx game converted by me don't work,a don't have nobody idea for run games

 

[Unborn]

so what is the list of ps1 games that dont work on adrenaline?? so far only RE2 doesn't work for me

Besides RE2 i tried Road Rash, after selecting a race the game get stuck on loading screen :/ Gonna try Road rash 3d and Road rash Jailbreak
Anybody tried to assign l2/r2 to the rear touchpad ? The only way for them to work for me is if i assign then to the front touch

 

[Deleted member 42501]

What are the new filters like?

 

[Vitaminer]

so what is the list of ps1 games that dont work on adrenaline?? so far only RE2 doesn't work for me

I'm pretty sure nearly all PSX game would work, wasn't there a plugin called popsloader that was released for the PSP that lets you choose the firmware version of the PSP to increase compatibility with certain PSX games? Pretty sure you can run popsloader in vita by adding the plugin in the config.txt

 

[Tom Bombadildo]

What are the new filters like?

There are none.

I'm pretty sure nearly all PSX game would work, wasn't there a plugin called popsloader that was released for the PSP that lets you choose the firmware version of the PSP to increase compatibility with certain PSX games? Pretty sure you can run popsloader in vita by adding the plugin in the config.txt

For Popsloader to work at all there'd need to be a specific version written to support Adrenaline itself, stock popsloader wouldn't boot anything at all.

So no, popsloader won't work.

 

[djricekcn]

i may not be putting it in to right directlyh...where does the eboots to go? i currently have them in ux0/pspemu/

 

[Tom Bombadildo]

i may not be putting it in to right directlyh...where does the eboots to go? i currently have them in ux0/pspemu/

PS1 games go in ux0:pspemu/PSP/GAME/titleidofgame

PSP games go in ux0:pspemu/ISO

 

[djricekcn]

thanks!

 

[Gray_Jack]

I tried this one psp emulator for snes called snex9x is supposed to be high memory mode homebrew and it doesn't load, neither does the gpsp kai 3.4 emulator

Did you entered the recovery menu and enabled the high memory layout?

 

[Sonic Angel Knight]

Did you entered the recovery menu and enabled the high memory layout?

Yes i did, on my vita is just a black screen for one minute then it gives a error and need too reboot to enter adrenaline again. On pstv, it just returns to psp home xmb

 

[me3x]

Resident Evil/2/3 works for me without any problems. Castlevania SOTN doesn't, but the same file works fine in my hacked PSP. Any ideas?

 

[Xandrid]

How do you use ur0 to rub games, I don't have a pspemu folder in there?

 

[yeshuachrist]

Quick Guide, took me a Few Hours to work everything out, upgraded from 3.55 to 3.60 using "Trails of Cold Steel II" the Psp Vita Cartridge/Game (it has the 3.60 update in it all you need to do is install the game's application)

First, install and activate HENkaku from https://henkaku.xyz/ (In the Vita’s Browser), creates a bubble (Molecule Shell) and then launches it. (Select Button for Menu and Start Button for another Menu)

Second, download “Henkaku’s Offline Installer”, now connect to FTP (make sure Molecular Shell is running and FTP message is displayed, press Select Button for FTP

Third, Navigate to “ux0” (this is the root of your memory card or internal storage) and you can upload the .vpk package here or in any subdirectory.
Once you upload all the packages you wish to install you can disconnect the client.
Back in molecularShell, press CIRCLE to stop the FTP server.
Navigate to “ux0:” and then to where you placed the packages. To install, select the package and press X.

Fourth, Install “Vita Shell”, so you don’t have to use “Molecular Shell” to install things, since it doesn’t work on most things.

Fifth, Copy the 'adrenaline' folder from the archive and paste it at 'ux0:' (root of “ux0” folder). Add the 661.PBP update file for the PSP into this folder. Add “config.txt” file to the folder “ux0/tai”

Sixth, (Start “Henkaku’s Offline Mode”) From your e-mail bubble and click on, “Henkaku Offline”, after you go to the inbox of [email protected]”, the hack should be reactivated

EPSP Didn’t Work (to create free bubble for adrenaline)

Download Pool Hall Pro from psn, and used its TITLEID in the config.txt file for the “ux0/tai” folder, restarted PSP VITA, then did the “Sixth Step” to turn on Henkaku, and launched the Psp Emulator from the “Pool Hall Pro” Bubble (you can connect to PSN with henkaku enabled on 3.60, it works for now, i’m a late commer to henkaku)

confit.txt example
# You must reboot for changes to take place.
*KERNEL
ux0:adrenaline/adrenaline.skprx
# henkaku.skprx is hard-coded to load and is not listed here
*main
# main is a special titleid for SceShell
ux0:app/MLCL00001/henkaku.suprx
*NPXS10015
# this is for modifying the version string
ux0:app/MLCL00001/henkaku.suprx
*NPUH10091 <-----(this is Pool Hall Pro's TITLE ID)
ux0:adrenaline/adrenaline.suprx
end of example

All my psp games that are in .cso and most of them are prometheus patched they work, the psp games work too. (the instructions above will turn the Game You Choose into the Launcher for the PSP Emulator).

PSP.cso games go in your, "ux0: pspemu/ISO" folder, just the "image file.cso")
PSX games go in your, "ux0: spemu/game/" folder "GAMENAME folder/EBOOT.PBP + Keys.bin"

(generic eboot file made with PSX2PSP worked, some games will not work that require specific versions of popsloader like Dragon's Quest VII that requires 4.01)

*I didn't even have to touch Sony's Content Manager Software, I deleted some games, but since you can use the psn store at least for now on 3.60, you can buy "Pool Hall Pro", to get everything work fine. (I also used "vitarw" to remove that annoying "Feature" page on my PSTV) (manual updating didn't work)

(Have trouble with an error when installing Henkaku from the webpage, then keep trying when it fails with an error, just wait about 1 minute after it fails and then try again (press the PS BUTTON, then hold "O" to close the page, or just close the window, then open a new window by closing switching back and forth from the app window, forget what I said, it works!), the internet cache clearing and database rebuilding did not work for me, goodluck) (Legend of Legaia had some issue hope it works good on 6.61 PSP firmware)

 

[Gray_Jack]

Yes i did, on my vita is just a black screen for one minute then it gives a error and need too reboot to enter adrenaline again. On pstv, it just returns to psp home xmb

Can you send me a link to the homebrew so i can test it?

 

[Sonic Angel Knight]

Can you send me a link to the homebrew so i can test it?

https://github.com/173210/snes9xTYL/releases

 

[Gray_Jack]

https://github.com/173210/snes9xTYL/releases

s9xTYLcm_mod.zip or s9xTYLmecm_mod.zip?

 

[cvskid]

s9xTYLcm_mod.zip or s9xTYLmecm_mod.zip?

I actually recommend using this native ps vita snes emulator instead of the s9xtylcm psp snes emulator. Runs games at full speed with no frames skipped including SA-1 games.
https://github.com/skogaby/CATSFC-libretro/releases

 

[ANU815]

I've been playing tombi 2 all day, which is an actiony adventure game. And that's been running absolutely perfectly except for FPS drops in the water temple (i think its the rain effect) but i vaguely recall it had the same thing on the actual PS1. Gonna try out a few more games tonight and i'll edit this post accordingly.


List:
(brief test = 5 mins of playing or so)

Tombi 2: Works perfectly (except for FPS drop water temple)
Kula World: Perfect (brief test)
Final Fantasy VIII: Perfect (brief test)
Metal Gear Solid: Perfect (15 mins test)
Resident Evil 2: unplayable (Blackscreen and freezes the epsp)
Resident Evil 2 Dualshock Version: Works.
Tony Hawk Pro Skater 2: perfect (brief test, one level)
Wild Arms: Perfect (brief test)
Digimon World: Perfect. (brief test, up to first fight)

Is you FFVIII a multi disc eboot or single CD? I have an eboot of just the last disc and my save data from TNX/PSP and can't get it to load in adrenaline. I gat the PS1 boot logo then black screen. Any ideas?

 

[Gray_Jack]

I actually recommend using this native ps vita snes emulator instead of the s9xtylcm psp snes emulator. Runs games at full speed with no frames skipped including SA-1 games.
https://github.com/skogaby/CATSFC-libretro/releases

The point is not the emulator itself, but test the high memory layout compatibility and bugs