Hacking 3ds XL nand dumping problems

[Johngear]

Hello,

I'm currently trying to dump my nand for my 3ds xl, but I have encountered a issue. When I plug my modified sd card into my adapter to dump the nand, the 3ds xl gets the bluescreen error I should get. But the computer or rather computers I have tried it on won't find the sd card. Sometimes it will but then it will give me errors in Win32DiskImager or tell me that there is no sd card inserted.

All my connections should be good, all end pins on the sd card has a connection to the outputs on the motherboard.

What am I doing wrong?
images of soldering and setup:
http://s18.postimg.org/6ll2c8eyh/IMG_20141227_151227.jpg
http://s9.postimg.org/ft1v02h9b/IMG_20141227_151251.jpg
http://s9.postimg.org/6zayiyuan/IMG_20141227_151310.jpg

 

[gamesquest1]

the wiring looks pretty long, the shorter the better for the nand mod, i generally keep it below about 10-15cm, also snap off the extra connectors in the mSD->SD adapter to prevent any shorts CMD looks like its touching the pin next to it, just snap off the unused pins, makes things easier

 

[Johngear]

the wiring looks pretty long, the shorter the better for the nand mod, i generally keep it below about 10-15cm, also snap off the extra connectors in the mSD->SD adapter to prevent any shorts CMD looks like its touching the pin next to it, just snap off the unused pins, makes things easier

Thanks alot nand is dumping now
The wires was to long so I made them 15 cm long