- Download Atmosphere and put it onto your SD card.
- Download Switch system version 11.0.0 and put it onto your SD card.
- Download fusee-primary (next to Atmosphere) and launch into Atmosphere using fusee-primary
- Use Daybreak to downgrade to 11.0.0.
Are you asking if downgrading is easy, or are you asking if switching to Atmosphere is easy?
Both are easy. For downgrading to 11.0.0, just follow the instructions I have listed above. To switch to Atmosphere, follow Steps 1 and 3 from the downgrade guide, and then add these signature patches to your SD card (fusee patches if you're using fusee-primary):
https://github.com/ITotalJustice/patches/releases/latest
If you are using a TX modchip, then things are going to be more complicated. You will want to follow this guide:
https://gbatemp.net/threads/running-atmosphere-on-patched-sx-core-switch.574083/
If you don't have a TX modchip, and the Switch is RCM exploitable, then you should follow my original instructions.
If the Switch is connected to the internet, it's going to download the update and harass you about updating the system. To delete the update, enter Recovery Mode (not RCM). You should block updates in the future with Incognito or 90DNS.
I didn't quite understand the problem you're having with your SD card. Make sure it is formatted as FAT32.
can get switch only to turn on in rcm mode then boot up in Atmosphere then try and boot but tinfoil will not connect i have changed dns setting my console is banned does this stop tinfoil working
Last I checked, most (if not all) Tinfoil shops are down for the time being.
Whether or not your system is banned is irrelevant to whether or not internet connections will work. A ban just prevents the system from using Nintendo's services.
You can use TinWoo or Awoo-Installer to install manually downloaded NSP files.
Are you saying the Switch will only boot into RCM when you coldboot it? If so, it's because you have AutoRCM installed. You can uninstall AutoRCM using Hekate.
Are you saying the Switch refuses to boot unless you use a jig to enter RCM first? If so, it could be because of a fuse count mismatch.
Similar threads
- No one is chatting at the moment.
-
-
@
Sonic Angel Knight:
Or, I also heard that if you use flash memory, it can act as more "RAM" at least windows tell me when I stick a flash drive into it. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
K3Nv2:
I can think of the design teams process another joystick and no audio or a joystick and mono audio -
-
-
-
-
-
-
-
