Or perhaps a broken SD card?Good Morning.
- Your USBLoader GX Version/Revision please ?
- Your USBLoader GX Loader´s IOS (58 or 249) please ?
- Your Games/ISOs/wbfs Files are ok ? Maybe you have made them "lighter" too much ?
- Your cIOS 249 / 250 Setup please ? Maybe a sysCheck can help.
Thank you.
Homebrew usb loader gx is not reading my usb and wiiflow isn't either
- Thread starter Felix12332
- Start date
- Views 5,237
- Replies 73
good morning and sorry for the late response i went to sleep since it was almost 3 am where i live
yes i did try to change it to 56 and 57
and i've been using port 0 this whole time as well
i'll go ahead and reinstall the homebrew channel in a moment
and i'm sure my sd card isn't broken
yes i did try to change it to 56 and 57
and i've been using port 0 this whole time as well
i'll go ahead and reinstall the homebrew channel in a moment
and i'm sure my sd card isn't broken
its there now what do i do
--------------------- MERGED ---------------------------
maybe it would be better to give up
Hello.
No chance to try an other HDD ?
Did you have also checked your Game ISO´s/WBFS Files ?
No chance to try an other HDD ?
Did you have also checked your Game ISO´s/WBFS Files ?
i don't have another hdd but i could get one
and no what should i check about the iso/wbfs files
and no what should i check about the iso/wbfs files
Did you maybe tried WiiFLow Mod ?
https://github.com/Fledge68/WiiFlow_Lite
If your Games works there,then your HDD and Games are ok and you maybe use that Loader instead.
If not:
Did you maybe tried "Downloads" from other Sources ?
Did you have checked your WiiBackup Manager Settings if they are correct ?
Thank you.
is there anything specific i should do about the settings
--------------------- MERGED ---------------------------
and i'll try the loader you sent me
--------------------- MERGED ---------------------------
and i'll try the loader you sent me
Only compare the Wii Backup Manager Settings with them from here please:
https://gbatemp.net/threads/how-to-split-brawl.484822/#post-7592791
Thank you.
wii flow sent me back to homebrew after a few seconds and i tried passing the games over with the new settings but it still lead me to a black screen
--------------------- MERGED ---------------------------
also i was able to play gamecube games perfectly
--------------------- MERGED ---------------------------
also i was able to play gamecube games perfectly
Good to hear GameCube Games are working.
Can you please plug your HDD on the PC and look to the Folder Structure please ?
You can use the Windows Explorer.
On the Root from your HDD there should be the Folder "wbfs".
Inside should be the Game Folders with the Structure like this:
New Super Mario Bros. Wii [SMNE01] <-this is the GameID and should be different for every other Game,of course.
And inside should be the .wbfs File like
SMNE01.wbfs <- also GameID
Can you tell me the Size(s) from your some of your wbfs Files please ?
Thank you.
folder name is Mario Kart Wii [RMCE01] inside is a file named RMCE01.wbfs and it weighs 2.61 gb aside from that in the main wbfs folder where the folder referenced before is there is a text file called disc.info
--------------------- MERGED ---------------------------
its the only game i have on the hdd at the moment
--------------------- MERGED ---------------------------
its the only game i have on the hdd at the moment
Thank you.
Ok,everything seems good for that.
So,Time for the Checklist again (please compare):
Your older HDD is formatted with FAT32
(GameCube Games are working)
Wiiflow sends you back
USBLoader GX (that Version from blackb0x) Game Black Screen
Loader´s IOS 58
Game IOS 249
emuNAND Saves disabled
The HDD is plugged to Port 0.
Your cIOS Setup is now corrected to 249[56] (rev 65535 Info: d2x-v10beta52)
Game seems to be correct transferred.
EDIT: Possible Solution found on Page 4
@Cyan - Maybe some Ideas left please ?
Maybe time to try 2 -3 more (downloaded) Games ?
Thank you.
Ok,everything seems good for that.
So,Time for the Checklist again (please compare):
Your older HDD is formatted with FAT32
(GameCube Games are working)
Wiiflow sends you back
USBLoader GX (that Version from blackb0x) Game Black Screen
Loader´s IOS 58
Game IOS 249
emuNAND Saves disabled
The HDD is plugged to Port 0.
Your cIOS Setup is now corrected to 249[56] (rev 65535 Info: d2x-v10beta52)
Game seems to be correct transferred.
EDIT: Possible Solution found on Page 4
@Cyan - Maybe some Ideas left please ?
Maybe time to try 2 -3 more (downloaded) Games ?
Thank you.
Last edited by Alexander1970,
ok but my internet is really slow so it'll take some time for me to get back
hello sorry for the late response
i did tell you my internet was really slow anyways it didn't work again, i'm still getting a black screen after launching the game in usb loader
i did tell you my internet was really slow anyways it didn't work again, i'm still getting a black screen after launching the game in usb loader
i checked some youtube videos on how to fix it but none of them really worked so
--------------------- MERGED ---------------------------
two of the videos i saw were changing the video mode
i attempted doing so but it didn't work either
--------------------- MERGED ---------------------------
two of the videos i saw were changing the video mode
i attempted doing so but it didn't work either
Good Morning.
That was also my Thought.
But then I saw you have a NTSC Wii (sysCheck) and your Mario Kart Wii was also the NTSC Version.
So I presume you only use NTSC Games.
You can try to delete the USBLoader GX Config File.
It should be in
SD Card:\apps\usbloader_gx\GXGlobal.cfg
Maybe also the
SD Card:\apps\usbloader_gx\GXGameSettings.cfg
After Re-Boot the Loader has the Standard Settings.
You maybe have to set the Loader´s IOS to 58 and Game IOS to 249 and disable emuNAND Saves again.
Good Luck
Thank you.
That was also my Thought.
But then I saw you have a NTSC Wii (sysCheck) and your Mario Kart Wii was also the NTSC Version.
So I presume you only use NTSC Games.
You can try to delete the USBLoader GX Config File.
It should be in
SD Card:\apps\usbloader_gx\GXGlobal.cfg
Maybe also the
SD Card:\apps\usbloader_gx\GXGameSettings.cfg
After Re-Boot the Loader has the Standard Settings.
You maybe have to set the Loader´s IOS to 58 and Game IOS to 249 and disable emuNAND Saves again.
Good Luck
Thank you.
Thank you.
After reading some Articles about your other "Issue"
https://gbatemp.net/threads/how-do-...troller-to-the-wii.472659/page-2#post-9449478
I am pretty sure,your Issue is your Controller/HDD Case.
After reading some Articles about your other "Issue"
https://gbatemp.net/threads/how-do-...troller-to-the-wii.472659/page-2#post-9449478
I am pretty sure,your Issue is your Controller/HDD Case.
Similar threads
- No one is chatting at the moment.
-
@
Psionic Roshambo:
It's not the movies or games downloads that I would worry about, like breaking into networks, downloading encrypted things, spying on network traffic. I have seen so many "Top Secret" seals on files when I was a kid -
@
Psionic Roshambo:
I was obsessed with finding UFOs, a surprising amount of US files where stashed on computers in other countries, China back in the early 90s omg sooo much
-
@
BigOnYa:
Yea that crazy, I've never tried hack into anything, I just pirate, and my ISP have send me 3-4 letters, so had to VPN it -
@
Psionic Roshambo:
Ship to ship communication software for the Navy although without access to the encrypting chips it was mostly useless
-
@
Psionic Roshambo:
I bet now a 4090 could probably crack it? Hmmm maybe not even back then I'm pretty sure they where using like 1024 bit encryption
-
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
I remember one time I downloaded like a 500MB ISO file on 56K and that literally took like 2 days
-
-
-
-
-
-
-
-
-
-
