Hacking Trouble with SD2Vita

Jackmad04 · May 27, 2020

Right so i know this is gonna come off as kinda vague but basically I can use my SD2Vita whenever there are no other plugins apart from Storagemgr.skprx I want to use Pkgj but I need nonpdrm when I enable nonpdrm, sd2vita stops registering and goes straight back to the Vita memory card I’m not sure what is going wrong (btw the MicroSD is 200GB and the SD2Vita is a V6.0)

Hayato213 · May 27, 2020

Try shutting off the unit and take out the SD2Vita and put it back, you might have to re-seat the SD2Vita that why, other than that you might have to check your config, worse case would be you have a bad SD2Vita.

Jackmad04 · May 27, 2020

Hayato213 said:
Try shutting off the unit and take out the SD2Vita and put it back, you might have to re-seat the SD2Vita that why, other than that you might have to check your config, worse case would be you have a bad SD2Vita.

actually that’s what I’ve been doing I had a V5.0 and just got 2 6.0’s today tried both of them and they work it’s just when I add extra plugins that for some reason it stops working again and for some other reason it makes a second kernel at the bottom of the config file

Hayato213 · May 27, 2020

Jackmad04 said:
actually that’s what I’ve been doing I had a V5.0 and just got 2 6.0’s today tried both of them and they work it’s just when I add extra plugins that for some reason it stops working again and for some other reason it makes a second kernel at the bottom of the config file

Post your config

Jackmad04 · May 27, 2020

# This file is used as an alternative if ux0:tai/config.txt is not found.
# For users plugins, you must refresh taiHEN from HENkaku Settings for
# changes to take place.
# For kernel plugins, you must reboot for changes to take place.
*KERNEL
ur0:tai/storagemgr.skprx
# henkaku.skprx is hard-coded to load and is not listed here
*main
# main is a special titleid for SceShell
ur0:tai/henkaku.suprx
*NPXS10015
# this is for modifying the version string
ur0:tai/henkaku.suprx
*NPXS10016
# this is for modifying the version string in settings widget
ur0:tai/henkaku.suprx

(i re-did the config file and took all the other plugins out, but if i had the new plugins in then it would make a new kernel and put them at the bottom)

Hayato213 · May 27, 2020

make sure you have no config.txt in ux0:tai, nonpdrm has to go under storagemgr and .skprx file require a reboot for them to take effect.

Jackmad04 · May 27, 2020

Hayato213 said:
make sure you have no config.txt in ux0:tai

the tai folder was there with a config.txt folder but no txt file, i've deleted that now

eighthdayregret · May 27, 2020

Jackmad04 said:
(i re-did the config file and took all the other plugins out, but if i had the new plugins in then it would make a new kernel and put them at the bottom)

Why would you do that? Try NOT doing that, and add any new plugins UNDERNEATH the entry for storagemgr.
As in:

# This file is used as an alternative if ux0:tai/config.txt is not found.
# For users plugins, you must refresh taiHEN from HENkaku Settings for
# changes to take place.
# For kernel plugins, you must reboot for changes to take place.
*KERNEL
ur0:tai/storagemgr.skprx
plugin
plugin
plugin
# henkaku.skprx is hard-coded to load and is not listed here
*main
# main is a special titleid for SceShell
ur0:tai/henkaku.suprx
*NPXS10015
# this is for modifying the version string
ur0:tai/henkaku.suprx
*NPXS10016
# this is for modifying the version string in settings widget
ur0:tai/henkaku.suprx

Jackmad04 · May 27, 2020

eighthdayregret said:
Why would you do that? Try NOT doing that, and add any new plugins UNDERNEATH the entry for storagemgr.
As in:

no i mean when i add the plugins underneath like how you've described, that's when the sd2vita stops working

Jackmad04 · May 27, 2020

UPDATE
so i have the sd card working, i install nonpdrm it's underneath the storagemgr.skprx file and it's stopping the sd card from working so it does work i'm just not sure how to do this bc i've made the config file exactly like your example and it's not working

Hayato213 · May 27, 2020

Jackmad04 said:
UPDATE
so i have the sd card working, i install nonpdrm it's underneath the storagemgr.skprx file and it's stopping the sd card from working so it does work i'm just not sure how to do this bc i've made the config file exactly like your example and it's not working

Might just be the SD2Vita or the SD card, have you tried another SD card?

Jackmad04 · May 27, 2020

Hayato213 said:
Might just be the SD2Vita or the SD card, have you tried another SD card?

I'll try that now if it isn't that then idk bc those are 2 new SD2vita cards got just today sooo

Hayato213 · May 27, 2020

Jackmad04 said:
I'll try that now if it isn't that then idk bc those are 2 new SD2vita cards got just today sooo

The only other thing I can think is that maybe it is not maybe enough contact point on the SD2Vita and the Vita game card reader slot, newer version of SD2Vita are easier to eject that can be your issue.

Jackmad04 · May 27, 2020

so i've done it and now it's not working again so i think it might be the plugins, is it possible that i need to get rid of the 2 other config files bc there are config_backup.txt and config.txt.bak

Jackmad04 · May 28, 2020

UPDATE AGAIN

so what I did was put a line between my storagemgr.skprx and the other plugins so it’s like this

*KERNEL
ur0:tai/storagemgr.skprx

ur0:tai/nonpdrm.skprx
Plugin
Plugin

idk why but it just works

Hacking Trouble with SD2Vita

Member

Newcomer

Member

Newcomer

Member

Newcomer

Member

fnerrrrrrrrrr!

Member

Member

Newcomer

Member

Newcomer

Member

Member

Similar threads

Popular threads in this forum