Homebrew RELEASE ChoiDujourNX - a system firmware installer homebrew for the Nintendo Switch

Noggerfragger · Oct 30, 2019

ChoidujourNX crashes when starting upgrade in emummc from 3.0.2 either to 6.2.0 or 8.1.0, the crash occurs when I select start install, It spews 3 lines on the right that I haven't been able to capture and shows the black screen error.
The nintendo Switch it's using atmosphere, I've tried adding fullsvcperm=1 to the boot option

payload=bootloader/payloads/fusee-primary.bin
fullsvcperm=1
kip1patch=nosigchk, nogc
icon=bootloader/res/icon_atmosphere.bmp

I also tried not enabling autorcm and It's still the same.
As a side note the home button on the (right) joycon becomes unresponsive for the rest of the boot session after the event.

pcwizard7 · Oct 30, 2019

are you in applet mode or nsp forwarder? what's the source of that forwarder as I had an issue with one from here for hbmenu

Noggerfragger · Oct 30, 2019

OMFG it was the nsp forwarder!
I'm upgrading rn.
Thank you very much!

pcwizard7 · Oct 30, 2019

Noggerfragger said:
OMFG it was the nsp forwarder!
I'm upgrading rn.
Thank you very much!

np

i use this one for full ram https://gbatemp.net/attachments/hbmenu_5-x-zip.177631/

ragestaker21 · Nov 11, 2019

Im trying to upgrade my EMUnand from 9.0 to 9.0.1 using choix

When i try to install firmware it asks to choose between exfat and fat32, my setup is fat32 and i want to keep the same format after upgrading

It is safe to select fat32?

ZachyCatGames · Nov 11, 2019

RAGEstacker said:
Im trying to upgrade my EMUnand from 9.0 to 9.0.1 using choix

When i try to install firmware it asks to choose between exfat and fat32, my setup is fat32 and i want to keep the same format after upgrading

It is safe to select fat32?

Selecting either is fine. the exfat version also includes fat32 stuff, so there’s no harm in choosing it (besides like a tiny increase in sysmodule memory usage I guess *shrugs*)

Flamelz · Nov 17, 2019

Someone could help me with my problem?
Basicaly after I updated to 9.0.1, like an idiot, I restored my old nand.
The update use 11 burnt fuses.
Basicaly I can't go after the atmosphere logo.
Rcm mode works perfect so my questione is: Can I update to 9.0.1 in rcm mode?

YannikRie · Dec 4, 2019

I installled the Firmware 4.0.1 from 9.0.1 using ChoiDujourNX but now the switch simply stops doing anything after showing the Atmosphere symbol when I try to boot it.

Is there any way to fix this or to factory reset the switch without needing to boot it?

tnt2005 · Dec 4, 2019

hey dev, thanks for your work, but cani be greedy and ask for joycon support instead? touch screen is not working because of game cartridge, i bought two replacement parts and neither was working :/. either buttons support or some other way via PC would be appreciated, thanks <3

Draxzelex · Dec 5, 2019

YannikRie said:
I installled the Firmware 4.0.1 from 9.0.1 using ChoiDujourNX but now the switch simply stops doing anything after showing the Atmosphere symbol when I try to boot it.

Is there any way to fix this or to factory reset the switch without needing to boot it?

What format is your SD card?

tnt2005 said:
hey dev, thanks for your work, but cani be greedy and ask for joycon support instead? touch screen is not working because of game cartridge, i bought two replacement parts and neither was working :/. either buttons support or some other way via PC would be appreciated, thanks <3

Its been almost a year since he logged on. This app will never be updated again.

YannikRie · Dec 5, 2019

Draxzelex said:
What format is your SD card?

It is in fat32

Draxzelex · Dec 5, 2019

YannikRie said:
It is in fat32

What version of Atmosphere are you using?

YannikRie · Dec 5, 2019

Draxzelex said:
What version of Atmosphere are you using?

I don´t know the version. I used a Kosmos pack. It´s the v13 - Inis Mona pack from https://github.com/AtlasNX/Kosmos/releases

I wasn´t able to send a link before. So I had to edit it

Draxzelex · Dec 6, 2019

YannikRie said:
I don´t know the version. I used a Kosmos pack. It´s the v13 - Inis Mona pack from https://github.com/AtlasNX/Kosmos/releases

I wasn´t able to send a link before. So I had to edit it

Sounds like your Atmosphere is extremely outdated. Update it to the latest version.

YannikRie · Dec 6, 2019

Draxzelex said:
Sounds like your Atmosphere is extremely outdated. Update it to the latest version.

I should update Atmosphere even though I´m using a very old firmware version? I normally use the latest version of Atmosphere

I now updated the version of Atmosphere. Nothing really changed but I recognized that I can connect the Joy Cons to the switch via Bluetooth

Zidapi · Dec 8, 2019

Is the dev still active in the community?

The latest Atmosphere patch notes indicate that the temporary hid-mitm module will be removed in Atmosphere 0.10.1, this will break choiNX if it’s not updated before then.

The temporary hid-mitm added in Atmosphere 0.9.x will be removed in Atmosphere 0.10.1.

Please ensure your homebrew is updated.

TotalJustice · Dec 8, 2019

Zidapi said:
Is the dev still active in the community?

The latest Atmosphere patch notes indicate that the temporary hid-mitm module will be removed in Atmosphere 0.10.1, this will break choiNX if it’s not updated before then.

it will not break choi as its touch screen based (iirc).

Psyfurius · Dec 17, 2019

Hi. I just did an Update from 9.0.0 to 9.1.0 (emuMMC) using ChoiDujourNX. I have Hekate 5.1.1, Kosmos 14.2 and Atmosphere 0.10.1 with the latest SigPatches for 9.1.0.

The AUTO RCM was enabled in ChoiDujourNX before the installation.

After the installation, The system did a reboot but instead of going AutoRCM, it booted sysNAND.

I checked with Hekate, and the AutoRCM is turned off.

Do someone know why ChoiDujourNX isn’t enabling Auto RCM after the Firmware update installation?

Thanks!

dumhackers · Dec 27, 2019

Hey guys
I need some kind of advice , basically I've tried to update from 8.01 to 9.01 and it gave me this error code.

Error code:2168-0002 (0x4a8)
program: 0100000000000352
Firmware: 9.1.9 (atmosphere 0.10. 1 -master-71b220a4)

attached a picture below for more information.

Regards

hippotas98 · Dec 28, 2019

dumhackers said:
Hey guys
I need some kind of advice , basically I've tried to update from 8.01 to 9.01 and it gave me this error code.

Error code:2168-0002 (0x4a8)
program: 0100000000000352
Firmware: 9.1.9 (atmosphere 0.10. 1 -master-71b220a4)

attached a picture below for more information.

Regards

Have you tried delete that folder ?
I don't know if it works or not, so you should back up your file

Homebrew RELEASE ChoiDujourNX - a system firmware installer homebrew for the Nintendo Switch

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Member

Active Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

New Member

Attachments

Member

Similar threads

Popular threads in this forum