Hacking PS3 4.81 IDPS dumper release
- Thread starter UltramanMHA
- Start date
- Views 23,634
- Replies 112
- Likes 8
Sorry for the late answer, busy with life haha, you should see in the readme 2 links for setups (one for python 2.7.14 and one for capstone), install both of them, drag the zip contents into the python folder and execute server.py.
If everything is working as it should, you should see a python console that is saying "Starting server on <IP>:<port>.
If you see that, go to your PS3's browser and type in the URL bar your IP and port. @aos10
Last edited by XxShalevElimelechxX,
@esc0rtd3w
I read the overview of the future hack to be released next year.
I just need a quick confirmation before i commit to purchasing a system for the future.
You said that the flash on consoles up to 250x are guaranteed to be writable.
Does that include 250x consoles as writable?
Thanks.
I read the overview of the future hack to be released next year.
I just need a quick confirmation before i commit to purchasing a system for the future.
You said that the flash on consoles up to 250x are guaranteed to be writable.
Does that include 250x consoles as writable?
Thanks.
2 quick questions (cause I'm a PS3 n00b):
1. Do I have to set up DNS to block updates?
2. I have a phat PS3. Which usb slot is usb000?
Thanx
1. Do I have to set up DNS to block updates?
2. I have a phat PS3. Which usb slot is usb000?
Thanx
2 quick questions (cause I'm a PS3 n00b):
1. Do I have to set up DNS to block updates?
2. I have a phat PS3. Which usb slot is usb000?
Thanx
1) Not sure if it exists
2) Right slot.
Hi, i tried it on my rebug 4.81 2508B slim (dont have any other ps3). It got to the idps has been saved to usb00. But my ps3 froze and did not switch off with beep. File was not there in the usb also. Tried a couple of times. 16gb Usb drive is fat32 formatted and is one the right port.
This does not work on cfw 4.81?
This does not work on cfw 4.81?
Last edited by jetuaime81,
alternatively, you can use multiman to get the ipds since you're already on rebug. you may have to enable cfw mode in multiman since it has two different modes. one of those will not show the idps.
Hey!
Trying on my PS3 Phat, A01, 4 USB, 60Gb Model, and running into an issue. The server runs, everything works up until I try to dump the file. The server just says the same 3 lines over and over again, like so:
192.168.1.67 - - [14/Nov/2017 20:55:45] "GET /html/include/utils.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:45] "GET /html/include/exp_rel.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:52] "GET /html/idps_nand.html HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:52] "GET /html/include/utils.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:52] "GET /html/include/exp_rel.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:59] "GET /html/idps_nand.html HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:59] "GET /html/include/utils.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:59] "GET /html/include/exp_rel.js HTTP/1.1" 200 -
etc., etc.,
The page on the PS3 refreshes, and every now and then I get the error:
"The string variable named usb_fp_rosdump could not be located in range 0x801800000 - 0x80278000"
Then the screen goes white, but nothing happens on the server side.
I've tried USB Devices in all 4 of my USB ports, SD slot on the PS3, and none of them have done anything but blink at me.
Please let me know if there's something I'm missing, or what I can do to troubleshoot the issue.
Thanks!
Trying on my PS3 Phat, A01, 4 USB, 60Gb Model, and running into an issue. The server runs, everything works up until I try to dump the file. The server just says the same 3 lines over and over again, like so:
192.168.1.67 - - [14/Nov/2017 20:55:45] "GET /html/include/utils.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:45] "GET /html/include/exp_rel.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:52] "GET /html/idps_nand.html HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:52] "GET /html/include/utils.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:52] "GET /html/include/exp_rel.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:59] "GET /html/idps_nand.html HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:59] "GET /html/include/utils.js HTTP/1.1" 200 -
192.168.1.67 - - [14/Nov/2017 20:55:59] "GET /html/include/exp_rel.js HTTP/1.1" 200 -
etc., etc.,
The page on the PS3 refreshes, and every now and then I get the error:
"The string variable named usb_fp_rosdump could not be located in range 0x801800000 - 0x80278000"
Then the screen goes white, but nothing happens on the server side.
I've tried USB Devices in all 4 of my USB ports, SD slot on the PS3, and none of them have done anything but blink at me.
Please let me know if there's something I'm missing, or what I can do to troubleshoot the issue.
Thanks!
Last edited by Djdragon44,
Yes rebug 4.81 CEX. But it hangs. Everything works properly; the ps3 webpage page refreshes every 3 or 4 seconds and the command line scripts keep running properly. Takes about 6 mins and finally shows idps dumped to usb00 root. But at this ps3 is froze; no refreshing. Pressing power off gives 3 beeps then switches off; just like when ps3 hangs.
Its not that i want the idps; i can get it from my nor dump also. Its just that i wanted to try this way. I guess it works only on ofw??!!
Also just to note i am not a developer i have windows 10 64bit running. I had to install capstone for python 32bit and some visual c redistributable 32bit also to get the server running. 64bit packages of these did not work.
Last edited by jetuaime81,
rename vsh.self.cexsp to vsh.self and vsh.self to vsh.self.dex if on DEX, in rebug toolbox under /dev_flash/vsh/module
I just wanted to create a thread about this lol, but here's the article: http://wololo.net/2017/11/15/ps3-idps-dumper-updated-support-ps3-firmware-4-82/
Similar threads
-
-
@
SylverReZ:
@AncientBoi, Yeah, believe you can do PSP games as well. But a Pi5 is much powerful in comparison.+2 -
-
@
Psionic Roshambo:
Not sure about other models of Pi4 but the Pi 4 B with 8GBs OCed to 2Ghz handles PSP really great except like 1 game I found and it is playable it just looks bad lol Motor Storm Arctic something or other. -
@
Psionic Roshambo:
Other games I can have turned up to like 2X and all kinds of enhancements, Motorstorm hmmm nope 1X and no enhancements lol
-
-
@
Psionic Roshambo:
I will admit that one does seem more interesting than the usual Ambernic ones, and I already liked those.
-
-
-
-
-
-
@
Veho:
I mean yeah sure but the specs are the same as a $50 model, it's just those pesky "quality of life" things driving up the price, like an actually working speaker, or buttons that don't melt, and stuff like that.+1 -
@
Psionic Roshambo:
I think all in my Pi 4 was well north of 200 bucks 150ish for the Pi 4 the case the fancy cooler, then like 70 for the 500GB MicroSD then like 70 for the Xbox controller. But honestly it's a nice set up I really enjoy and to me was worth every penny. (even bought more controllers for 2 or 4 player games.) hmmm have never played any 2 player games yet
-
@
Veho:
Yeah that's what I hate about the RPi, it's supposedly $30 or something but it takes an additional $200 of accessories to actually turn it into a working something.
-
-
-
@
Psionic Roshambo:
Yeah a lot of it I consider a hobby, using Batocera I am constantly adjusting the collection adding and removing stuff, scraping the artwork. Haven't even started on some music for the theme... Also way down the road I am considering attempting to do a WiiFlow knock off lol
-
-
-
@
Veho:
Hmm, with that in mind, maybe a complete out-the-box solution with all the games collected, pacthed and optimized for me would be worth $150
-
-
-
-
@
SylverReZ:
What its like to do online shopping in 1998: https://www.youtube.com/watch?v=vwag5XE8oJo
