Toggle sidebar

Hacking Atmosphere-NX - Custom Firmware in development by SciresM

  • Thread starter Thread starter Waze0613
  • Start date Start date
  • Views Views 2,841,035
  • Replies Replies 9,522
  • Likes Likes 93
impeeza said:
mate the tutorial will take a time, but here are the patches and the original picture.
Click to expand...
thank you
Post automatically merged:

froggy55 said:
thank you
Click to expand...
i just realized i gave you the wrong files i already have the peachxxx the logo should have been a pikachu so my bad if its ok id like to upload the correct files
Post automatically merged:

here is the correct one sorry about that
 

Attachments

  • Haha
Reactions: impeeza
froggy55 said:
thank you
Post automatically merged:


i just realized i gave you the wrong files i already have the peachxxx the logo should have been a pikachu so my bad if its ok id like to upload the correct files
Post automatically merged:

here is the correct one sorry about that
Click to expand...
no problem
 
froggy55 said:
thank you
Post automatically merged:


i just realized i gave you the wrong files i already have the peachxxx the logo should have been a pikachu so my bad if its ok id like to upload the correct files
Post automatically merged:

here is the correct one sorry about that
Click to expand...
did you do the png or just the ips files cuz i would like the png for the future and thanks again
Post automatically merged:

froggy55 said:
did you do the png or just the ips files cuz i would like the png for the future and thanks again
Click to expand...
oh my god i am so dumb i just downloaded my own upload thinking you had already fixed it man im out of it todaY LOL
 
Last edited by froggy55,
  • Haha
Reactions: Bruce_Wayne and impeeza
froggy55 said:
thank you
Post automatically merged:


i just realized i gave you the wrong files i already have the peachxxx the logo should have been a pikachu so my bad if its ok id like to upload the correct files
Post automatically merged:

here is the correct one sorry about that
Click to expand...
here is the pikachu png and patches
Post automatically merged:

impeeza said:
here is the pikachu png and patches
Click to expand...


froggy55 said:
did you do the png or just the ips files cuz i would like the png for the future and thanks again
Click to expand...


I normally create a archive where the picture is on the root and the patches are on the «atmosphere» folder; ready to be dropped on the root of your sd card
 

Attachments

froggy55 said:
thank you again
Click to expand...
Mate here is the tutorial, if you can take a look and let me to know any improvement I will thank you a lot.

impeeza

Tutorial  Thread 'Recover the image from a set of IPS patches for Bootlogo.'

Sometimes you can find a set of bootlogo's IPS patch files, but you do not remember which image was used to created them or you loose the original image.

In order to recover the image you can patch an uncompressed main file from the NCA with the titleID VI from a set of firmware files, then apply the IPS patch to that file and then extract the image from the patched file. For last use Gimp to convert the binary data to a image.

Tools you need



In order to complete the task you need:
  • FLIPS, a tool to apply IPS patches to binary files on your computer...
  • Like
 
TomSwitch said:
I see nothing wrong. I only see you choose start field as background.
Click to expand...
yeah, so, i just updated my breeze to the current beta version, 125.01, and it's still not registering any of my games on switch and the entire menu options are still grayed out with only the options in the screenshots i posted that are white and usable

i never had any problems with breeze until i got my switch out of pawn and it updated to the current version
 
IceBlazeWinters said:
yeah, so, i just updated my breeze to the current beta version, 125.01, and it's still not registering any of my games on switch and the entire menu options are still grayed out with only the options in the screenshots i posted that are white and usable

i never had any problems with breeze until i got my switch out of pawn and it updated to the current version
Click to expand...
You have continue to not show anything that is wrong. So I have to just assume it is user error. Breeze has no known problem is all I can say.

PS: Maybe you want to start spamming AI with screen shot and hope for the best.
PPS: User make all kinds of errors all the time, including lying about using atmosphere. Real story, someone lied about using atmosphere while they were using some fork that cause the problem they had.

The only configuration I can reasonably support is official Atmosphère with impeeza’s sys-patch (I suppose too many people can’t live without it), with nothing else installed apart from my own stuff. Liars will be remembered.

Some people cannot understand "with nothing else installed", they see all the other stuff they installed as harmless and lie rather than removing them to test if they are really harmless as they assumed.
 
Last edited by TomSwitch,
IceBlazeWinters said:
yeah, so, i just updated my breeze to the current beta version, 125.01, and it's still not registering any of my games on switch and the entire menu options are still grayed out with only the options in the screenshots i posted that are white and usable

i never had any problems with breeze until i got my switch out of pawn and it updated to the current version
Click to expand...
try goto Breeze, Settings and install gen2 then reboot
 
I tried to install a NSZ file via Tinwoo and it crashed my Atmosphere.

I accidentally rebooted into normal mode.

Now the switch is just sitting there in non-Atmosphere mode.

How do I reboot back into Atmosphere? It's been about 3 years since I hacked it and I've forgotten how to do so.

Thanks in advance.
 
testing123 said:
I tried to install a NSZ file via Tinwoo and it crashed my Atmosphere.

I accidentally rebooted into normal mode.

Now the switch is just sitting there in non-Atmosphere mode.

How do I reboot back into Atmosphere? It's been about 3 years since I hacked it and I've forgotten how to do so.

Thanks in advance.
Click to expand...
That deppends, Which console do you have, have you installed a chip?
 
impeeza said:
That deppends, Which console do you have, have you installed a chip?
Click to expand...

No chip.

Just an older Switch I hacked years ago with the jig and Fusee.bin.

I still have all the same files and the same jig right here.

I THINK I fixed this before by rebooting with the jig and injecting the fusee.bin file via computer, but I'm not 100% sure anymore.
 
testing123 said:
I tried to install a NSZ file via Tinwoo and it crashed my Atmosphere.

I accidentally rebooted into normal mode.

Now the switch is just sitting there in non-Atmosphere mode.

How do I reboot back into Atmosphere? It's been about 3 years since I hacked it and I've forgotten how to do so.

Thanks in advance.
Click to expand...
WOW, that is super stable. Three years without a reboot.

I consider myself someone who rarely reboots my Switch, but three years without a reboot is something to salute!
 
  • Like
  • Haha
Reactions: Blythe93, impeeza and testing123
TomSwitch said:
WOW, that is super stable. Three years without a reboot.

I consider myself someone who rarely reboots my Switch, but three years without a reboot is something to salute!
Click to expand...

Thanks!

Can you guide me on how you do it? I've forgotten how to reboot back into Atmosphere when it's stuck like this.
 
testing123 said:
Thanks!

Can you guide me on how you do it? I've forgotten how to reboot back into Atmosphere when it's stuck like this.
Click to expand...
Power off completely the console

Then You need to put the jig in the right rail of the console then insert the payload injector on the USB port of the console and kept pressed the vol+ button And then without release the vol+ button momentarily press the power button.
 
  • Like
Reactions: Blythe93, testing123 and TomSwitch
impeeza said:
Power off completely the console

Then You need to put the jig in the right rail of the console then insert the payload injector on the USB port of the console and kept pressed the vol+ button And then without release the vol+ button momentarily press the power button.
Click to expand...

Okay, thanks.

Just to be 100% clear:

1. Jig in.
2. Put USB to computer. Not sure if it's usb 2 or 3, but it's a blue port.
3. Push volume UP and hold volume UP.
4. Push power button.

Then what?

I assume it's :

5. Let go of both power button AND volume UP button.
6. Tegra should detect Switch at this point.
7. Inject Fusee.bin

Then what?
 

Site & Scene News

New Hot Discussed User Submitted

Go to forum More news

Popular threads in this forum