Toggle sidebar

Tutorial  Updated

PS5 Exploit Guide

PS5 Hack Status:

FW Ranges:
2.XX = KEX+HV: PS4/5 backups, possible keys exploit (WK: 2.50 best / 2.7X max)
3.XX = KEX+HV+Linux: PS4/5 backups, possible keys exploit (WK/BD/LUA: 3.20 best / 3.21 max)
4.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/LUA (Y2/NF/YARPE 4.03+): 4.50 best / 4.51 max)
5.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/Y2/NF/LUA/YARPE: 5.50 best + max)
6.XX = KEX: PS4/5 backups (KEX+HV+Linux: 6.02 max) (WK/BD/Y2/NF/LUA/YARPE: 6.02 for Linux / 6.50 max)
7.XX = KEX: PS4/5 backups (KEX+HV+Linux: 7.61) (WK/BD/Y2/NF/LUA/YARPE: 7.61 best + max)
8.XX-10.00 = KEX: PS4/5 backups, no HV (WK/BD/Y2/NF/LUA/YARPE)
10.01-12.70 = KEX: PS4/5 backups, no HV (WK/BD/Y2/NF/LUA/YARPE)
13.XX = HV+KEX+WK (WK/BD (13.42)/Y2/LUA/YARPE)
14.XX = No KEX/UL only (LUA/YARPE)

NOTE 1: Recommended firmware is subjective. Staying low is always recommended.
NOTE 2: Do not update too many major versions (e.g., 4.xx to 5.xx or 7.xx to 8.xx). Remain low unless all you want is backups.
NOTE 3: P2JB can take over an hour to exploit on FW up to 12.70.

Hypervisor (HV):
Highest released HV: 7.61
Highest unreleased HV: 13.60 (SlopVisor)
*unreleased/unimplemented

Kernel (KEX):
Highest released KEX: 13.60 (ReLapse)
Highest unreleased KEX: 13.60 (SlopSploit)
UMTX2: 1.00-7.61 (*WK to 5.50 / BDJB to 7.61)
Lapse: 1.00-10.01
Relapse/Prolapse: 7.00-13.60
Poopsploit: 4.03-12.00 (*BD to 12.00)
P2JB: 9.00-12.70 (*WK: Lapse to 10.01 / P2JB to 12.70)

Userland (UL):
LUA (Artemis): 2.00-LATEST (LUA exploit, + Lapse up to 10.01)
Y2JB: 4.03-13.40 (YouTube exploit, + Lapse: 10.01 / P2JB: 12.70)
NFNH: 4.03-12.XX (Netflix exploit, + Lapse: 10.01)
YARPE: 4.03-12.XX (Ren'Py exploit, + Lapse: 10.01 / P2JB: 12.70)
BD-JB: 1.00-13.42 (BD exploit + UMTX2: 7.61 / BD-JB5 + Poops to 12.00)
Webkit: 1.00-5.50 (PSFREE +UMTX2: 5.50 / 7.00-13.60 (RELAPSE)
Mast1C0re: 1.00-7.61 (Depreciated for LuaC0re)
LuaC0re: 1.00-12.70 (Poops: 4.03-12.00/P2JB: 9.00-12.70)
REDIS: 1.00-5.50 (Jordy's untethered JB on boot)

NOTE 1: A userland entry point (UL) chained to kernel exploit (KEX) is required to exploit your console.
NOTE 2: Consoles 7.00-13.60 can use WebKit and RELAPSE (Recommended)

Useful Applications:
FPKG: 3.00-11.60 with KStuff Lite / 12.XX-13.60 SOON
Kstuff Lite: 3.00-12.70 HERE
Kstuff Toggle: 3.00-12.00 HERE
PS5 App Dumper: 3.00-12.00 HERE
Dump Runner: 3.00-12.00 HERE
Dump Installer: 3.00-12.00 HERE
Backporting: Possible (backpork / Porkfolio)
PS4/PS5 DLC: Work with Kstuff Lite
Trophies: Work with Kstuff Lite
Compression: Works with Kstuff Lite
Homebrew Enabler: etaHEN (3.00-10.01) latest HERE
PS5 Backup manager: ItemzFlow Compatibility list: HERE
PS4 Backup Loading: Works (rest mode & backports work, can crash).
PS5 Debug NG: 3.XX-13.XX HERE
PS5 Remote Play: Works HERE & HERE
PS5 Trainers/Cheats: Work

UART: HERE
Linux: (OG: 3.00-7.61, Slim: 7.61) HERE
Kldload (wip): 3.00-6.50 HERE
PSN access: NEVER
Latest OFW: 14.00 (16/9/26)
Summarised OFW/Model guide: HERE
1.XX-7.61 compatibility list: HERE
PS5 SDK Repo: HERE
Legit PKG Updates: HERE or HERE
OFW Updates: HERE (history HERE)

Preparing Your Console:

It is recommended to either self-host offline or block these addresses in your router to avoid accidental updates or getting an update nag. Using the DNS method is no longer failsafe, as these are not guaranteed to be running 24/7.


dau01.ps5.update.playstation.net
dbr01.ps5.update.playstation.net
dcn01.ps5.update.playstation.net
deu01.ps5.update.playstation.net
dhk01.ps5.update.playstation.net
djp01.ps5.update.playstation.net
dkr01.ps5.update.playstation.net
dmx01.ps5.update.playstation.net
dru01.ps5.update.playstation.net
dsa01.ps5.update.playstation.net
dtw01.ps5.update.playstation.net
duk01.ps5.update.playstation.net
dus01.ps5.update.playstation.net
fau01.ps5.update.playstation.net
fbr01.ps5.update.playstation.net
fcn01.ps5.update.playstation.net
feu01.ps5.update.playstation.net
fhk01.ps5.update.playstation.net
fjp01.ps5.update.playstation.net
fkr01.ps5.update.playstation.net
fmx01.ps5.update.playstation.net
fru01.ps5.update.playstation.net
fsa01.ps5.update.playstation.net
ftw01.ps5.update.playstation.net
fuk01.ps5.update.playstation.net
fus01.ps5.update.playstation.net
hau01.ps5.update.playstation.net
hbr01.ps5.update.playstation.net
hcn01.ps5.update.playstation.net
heu01.ps5.update.playstation.net
hhk01.ps5.update.playstation.net
hjp01.ps5.update.playstation.net
hkr01.ps5.update.playstation.net
hmx01.ps5.update.playstation.net
hru01.ps5.update.playstation.net
hsa01.ps5.update.playstation.net
htw01.ps5.update.playstation.net
huk01.ps5.update.playstation.net
hus01.ps5.update.playstation.net
sgst.prod.dl.playstation.net
gs2.ww.prod.dl.playstation.net

Alternative DNS IP:
62.210.38.117 - User Guide = ES7in1
or
45.56.67.85
(Leave DNS 2 blank)

To determine your OFW version:
Go to settings > system > console information.

Version string info:
Year.Half (1st/2nd half of the year)-Major Version No.Minor Version No.Extended info-Further Info.Retail/Debug

21.02-04.03.00.00-00.00.00.0.1

It is recommended to keep your console as low as possible to have access to better jailbreak stability and features. Stay as low as possible within the "Golden" firmware brackets that apply to your current firmware, see the top of this page.

(No jailbreak is ever guaranteed. No developer is obliged to release anything publicly)

WARNING:
Only update OFW manually via USB by getting the firmware file from HERE and installing from <USB>:/PS5/UPDATE/PS5UPDATE.PUP
(Updating with RECOVERY PUP will perform a factory format and will wipe your internal HDD)

PS5 factory mode PUP installation path:
/usb/PROSPERO/UPDATE/PROSPEROUPDATE.PUP

NOTE: Make a system back up before attempting any modifications.
On console: go to [Settings] > [System] > [System Software] > [Back Up and Restore] > [Back Up Your PS5]

Select Your Jailbreak:

WEBKIT:BD-JB:LUA:Y2JB:NFNH:YARPE:LuaC0re:BD-UN-JB:


  1. Information:
    Firmware 1.00-5.50 or 7.00-13.60 is required for the webkit exploit.

    Enabling web browser:
    Open [Settings] > select [Users & Accounts] > select [YouTube] > click "Link" > click "use browser" > click "terms" (bottom right) > click google apps icon (top right) > select Google Search.

    Exploiting 1.00-5.50:
    Enter https://zecoxao.github.io/luasauce/ or https://github.com/kmeps4/PSFree into google > click “Jailbreak" or wait for it to complete.

    Exploiting 7.00-13.60:

    https://ntfargo.github.io/Relapse-Exploit/

    https://zecoxao.github.io/bagagwa/

    https://soniciso1.github.io/poopicker/

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  2. Important:
    You will need a BD dive paired to your Slim/Pro console or an OG Phat model . Consoles must be on 1.00-13.42 to run this exploit.

    Recommended ISO: Viktorious AIO Auto BD-JB ISO for 4.XX-7.61

    Exploiting: 1, Burn ISO to a blank BD-R or BD-RE > Insert into console > click on the [DISC PLAYER] icon.

    2, Highlight [PIPELINE RUNNER] > click option 2 [Normaljailbreak-etaHEN-UMTX1.pipe] to auto load etaHEN ready for ItemzFlow.

    ELF Loader uses PS5 IP: port 9021 / BIN loader uses 9020 / Jar loader uses port 9025

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  3. Important:
    LUA entry point works from 2.00 to the latest OFW, but there is no KEX above 12.70 yet.
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Your PS5 console must be activated to use save copying for PS4 games.
    1. Insert your game disc and, as soon as possible, make a save file within it.
    2. Copy the save files to USB, go to [SETTINGS] > [STORAGE] > [CONSOLE STORAGE] > [SAVE DATA] > [PS4 GAMES] > select the game save and copy to a USB drive.
    3. On PC, using a Google Drive account, make a new folder with the GAME ID of your game, and upload the savedata & savedata.bin files to that folder.
    4. Share the folder, set it to editor mode, share with anyone, and click "copy the link".
    5. Join the HTOS Discord group: HERE type "/decrypt", select "FALSE" for including SCE_SYS, paste or type in the Google Drive link, and press enter. The bot should begin mounting your save. (If it doesn't, paste in the link again.)
    6. Click "ENCRYPTED" to remove the Sony PFS layer. Download the generated files and extract the folder to your desktop (you should have 4 files in there and be named dec_savedata_CUSA[GAME ID]).
    7. Using REMOTE LUA LOADER, open the savedata folder, copy the 20 files within into your encrypted save folder on your desktop.
    8. Upload the encrypted save folder (now with 24 files in) to your Google Drive. It should be named "dec_savedata_CUSA[GAME ID]" where GAME ID is your games 5 digit number, and set it to editor mode, share with anyone, and then click "copy the link".
    9. Go back to the HTOS discord server, and type "/encrypt", hit "FALSE" for uploading individually, and "FALSE" to include SCE_SYS. Finally, hit shared_gd_link and paste in your link to the original save (4 files) folder. (If it doesn't, paste in the link again.)
    10. When this is done, paste the link to the decrypted save (24 files) folder, and the bot will encrypt the files.
    11. Resign the files by typing "/resign" followed by your account name on the console, or PSN ID associated with that account if using the latest OFW.
    12. Download the resigned files, extract the files to your USB drive and overwrite them into the savedata folder on your USB or external drive.
    13. Copy the saves back to your console [SETTINGS] > [SAVE DATA AND GAME/APP SETTINGS] > [SAVE DATA PS4] > [COPY OR DELETE FROM USB] > [COPY TO CONSOLE STORAGE] > select your game save folder from the USB drive and copy/overwrite old save data.
    14. Load LUA game again, and you should see the LUA LOADER screen.
    15. You can use "SEND_LUA.PY" to send the UMTX files to the loader.
    (NOTE: Some games require manual loading of save game)

    On firmware up to 7.61, you can now load UMTX/2 followed by etaHEN by sending the files to your console IP on PORT 9026.
    On firmware 8.00-LATEST, you can connect with the REMOTE LUA LOADER APP to send debug notifications or FTP on port 1337.

    LUA Loader: HERE or HERE

    Auto LUA Loader Fork: HERE

    Compatible LUA games:
    Aerial Life (CUSA17122)
    Aibeya (CUSA17068)
    Aikagi 2 (CUSA19556)
    Aikagi Kimi to Issho ni Pack (CUSA16229)
    Aikano Yukizora no Triangle (CUSA19370)
    Boku to Nurse no Kenshuu Nisshi (CUSA12049)
    Boku to Joi no Shinsatsu Nisshi (CUSA18107)
    Fuyu Kiss (CUSA29745)
    Hamidashi Creative (CUSA27389)
    Hamidashi Creative Demo (CUSA27390 requires the latest OFW to download from PSN)
    Haruoto Alice (CUSA14324)
    IxSHE Tell (CUSA17112)
    IxSHE Tell Demo (CUSA17126)
    Jinki Resurrection (CUSA25179)
    Jinki Resurrection Demo (CUSA25180 requires the latest OFW to download from PSN)
    Maid-san no Iru Kurashi (CUSA18106)
    Nora Princess and Stray Cat Heart HD (CUSA13303: Rename save9999.dat into nora_01.dat)
    Nora Princess and Strat Cat Heart 2 (CUSA13586)
    Raspberry Cube (CUSA16074)
    Winter Guest (CUSA11977)

    WARNING: using demos is free but can become corrupt, and you cannot upgrade your internal HDD either. If you lose the demo you can no longer use the exploit. Disc recommended.

    Incompatible LUA games:
    Dokyusei Remake Csver (CUSA47117)
    Dōkyūsei: Bangin' Summer - Home Edition Demo (CUSA47132)
    Kiss Trilogy (CUSA19341)
    Love Clear Demo (CUSA18109)
    Mikagami Sumika no Seifuku Katsudou (CUSA11481)
    Sen no Hatou, Arazone no Hime (CUSA09647)
    Tonari ni Kanojo no Iru Shiawase: Two Farce (CUSA09825)
    Tonari ni Kanojo no Iru Shiawase Summer Surprise (CUSA18998)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  4. Requirements:
    PS5 console must be on 4.30-12.70 and previously activated through PSN or fake activated to use the YouTube app, unless you're restoring a backup.
    (Note: restoring a backup will factory reset your console).

    Information:
    If updating and older installation, download the latest download0.dat > use FTP or PS5 Explorer to place it in the user/download/PPSA01650 folder.

    Preparation:
    Download the Y2JB_backup_X.X(4.03) if you're on 4.03-12.40, or the Y2JB_backup_X.X(12.20) if you're on 12.60 or higher from HERE
    On PC: format a USB 3.0 HDD to exFAT, and copy the PS5 folder from the backup to the root, and put the latest nanodnf.efl from nanoDNS to the root too.
    On console: go to [Settings] > [System] > [System Software] > [Back up and Restore] > [Restore] > select the y2JB back up & let it install (the console will reboot when complete).
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    Exploiting:
    Going to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection > change [DNS Settings] to manual > change [Primary DNS] to 127.0.0.1 > click [Done] > open the [YouTube App].
    (Note: Ignore and internet connection issue warnings)

    Firmware up to 10.01 will use Lapse Kernel Exploit. Firmware 10.20-12.70 and above will use P2JB and could take up to an hour.

    You can send payloads using netcat GUI to PS5's IP Address & port 9021.

    You can swap the download0.dat to itzPLK version for auto loading and payload manager in future (payload manager accessible through browser on 127.0.0.1:8084)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  5. Requirements:
    PS5 console must be on 4.30-10.01 and previously activated through PSN or fake activated. You will need a 256GB external HDD (minimum).

    Preparation:
    Download balenaEtcher
    Download the latest Extended Storage or M.2 Image (select your m.2's capacity)

    EXTERNAL DRIVE METHOD (Netflix_PS5_EU_Ext.7z):
    1a, On PC: connect your 256GB (min) USB drive to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 256GB is the smallest drive you can use)

    2a, On console: click [Settings] > [Storage] > [USB Extended Storage] > [Games and Apps] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    INTERNAL DRIVE METHOD (Netflix.XXXXGB.7z):
    1b, On PC: connect the M.2 to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 4TB will take 80 mins, 2TB 45 mins, 256GB 10 mins)

    2b, On console: Power off the console > insert the M.2 SSD > power on the console > click [Settings] > [Storage] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab).

    Exploiting:
    1a, for consoles 10.01 and below, on console: go to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection. Go to Proxy > change [Automatic] to [Manual] > enter Address: 172.105.156.37 & port: 42069 > click [Done] > open the [Netflix App].
    (Note: Ignore and internet connection issue warnings)

    1b, for consoles 10.20-12.70, COMING SOON.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  6. Important:
    YARPE works from 4.30 to 12.70 (9.00 - 12.07 via P2JB)
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Requirements:
    PS5 console must be on 4.30-10.01 to use this exploit.

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  7. Requirements:
    PS5 console must be on 4.30-12.70 to use this exploit. SWRR

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].


  8. [UPDATED]
    No longer needed if using latest WebKit (to 13.60) or BD-JB (to 13.42)!

    Important:
    This method modifies the BD-J stack to allows BD-JB entry point to be re-enabled on consoles up to 13.60, for convenience only.

    Very Important:
    This method requires your console to be jailbroken by another method first to gain access to alter the files.

    https://github.com/Gezine/BD-UN-JB

    Preparation:
    Burn the ISO to a blank Blu Ray, insert it into the jailbroken console. Send the bdj_unpatch.elf to elfldr using netcat GUI to PS5's IP Address & port 9021 to unpatch BD-J.

    (NOTE: DO NOT REINSTALL/UPDATE FW, IT WILL WIPE THE PATCH AND LOSE BD-JB)


Once jailbroken it is recommended to run KSTUFF LITE and SHADOWMOUNTPLUS at minimum to get you up and running.
(ShadowMountPlus: is an automated background auto-mounter payload for jailbroken PS5 consoles. Detects, mounts, and installs game dumps from internal or external storage, with support for UFS, exFAT, PFS, and nested compressed PFS containers)

Additional Information:

Blocking Updated with nanoDNS:
Set primary DNS manually to 127.0.0.1. Send latest elf to BIN LOADER using netcat GUI to PS5's IP Address & port 9021.

PS4 GAME INFORMATION:
OFW 1.xx cannot run PS4 games.
OFW 2.xx runs PS4 games up to 8.03
OFW 3.xx runs PS4 games up to 8.52
OFW 4.xx runs PS4 games up to 9.04
OFW 5.xx runs PS4 games up to 9.60
OFW 6.xx runs PS4 games up to 10.50
OFW 7.xx runs PS4 games up to 11.00
OFW 8.xx/9.xx runs PS4 games up to 11.50
OFW 10.xx runs PS4 games up to 12.00
OFW 11.xx runs PS4 games up to 12.50
OFW 12.xx runs PS4 games up to 13.00
OFW 13.xx runs PS4 games up to 13.52
OFW 14.xx runs PS4 games up to 14.00

(Note: PS4 backported FPKGs also work perfectly on an exploited PS5 with Kstuff)

You can install free/demo PKGS (legit pkgs) via the debug pkg installer, provided you have all the files/json/licences required.
(Astro’s Playroom has no licences and can be installed and played from official pkgs and updated inline with your firmware)

Warnings:

1: Never enable IDU mode.
If you do, you will need to enter staff mode by holding L1 + L2 and tapping this combo: circle, cross, square, triangle, right D-Pad. Release L1 + L2, and you can access settings to exit IDU.

2: Try to stay on the lowest FW possible and wait for hacks on that firmware.

3: Installing legit game PKGs you do not own will never work, even if spoofed.

4: If you get stuck in a boot loop at the PS logo, the SNVS is corrupted (if the hash check fails on boot, this causes a “soft brick”). It’s not “bricked”. Simply reinstall your current firmware RECOVERY PUP in safe mode from USB: PS5 > UPDATE > PS5UPDATE.PUP.

Archived Information

https://github.com/astrelsky/libhijacker

https://github.com/illusion0001/libhijacker

https://github.com/TheOfficialFloW/Presentations/blob/master/2022-hardwear-io-bd-jb.pdf

https://github.com/sleirsgoevy/bd-jb

https://github.com/psxdev/bd-jb

https://gbatemp.net/download/remount-system-with-write-permissions.37807/

https://github.com/john-tornblom/ps5-payload-sdk

https://github.com/john-tornblom/bdj-sdk/actions/workflows/bdjb.yml
 
Last edited by KiiWii,
  • Like
  • Love
  • Wow
Reactions: 2Hack, satan89, ThaVik22 and 100 others
Click to expand...
It seems something has changed? This is the 5th time I reboot this evening. This morning all but 1 jailbreak (so about 95% success) ETAHEN loads were successful.

Now I try it again via the same tiny cc link and the message for R2 to load ETAHEN doesn't appear anymore. Not even after multiple reboots and trying.

Has the site removed some stuff?

I'm on 13.00.
 
cvskid said:
Thank you very much i was thinking it was like nintendo switch where you delete your real account to make a fake one.
Click to expand...
Yeah fortunately not, if you have legit games and digital content already installed, you can keep it too and just use your account and console like a legit offline console, bundled with the ability to load fpkg games and SM+ etc.

Your legit stuff will keep working on that console until you do something that wipes your licenses, like a system restore or factory reset, or your cmos battery "bugs out" like on ps4 lol
 
  • Like
Reactions: cvskid
Can anyone explain to me why I'm seeing newer dumps like 007 First Light requiring FW 12.xx at minimum without any backport? I thought we needed at least FW 13.00 for those newer games to be dumped hence why we had to wait so much time.
 
  • Haha
Reactions: solitaire4eva
ThePSGuy said:
Can anyone explain to me why I'm seeing newer dumps like 007 First Light requiring FW 12.xx at minimum without any backport? I thought we needed at least FW 13.00 for those newer games to be dumped hence why we had to wait so much time.
Click to expand...
All games force you to use the latest system firmware whenever they go gold, but that doesn't mean they need that firmware.
In the param.sfo of your dumps, you can see the SDK and the Required firmware.

The first is the minimum firmware the game will actually run on, the latter is what the disc/digital copy would force you to install in order to play. Since they can be dumped on their required firmware, they can be played on their SDK firmware as a minimum.

Backports are only needed when the firmware you play on is lower than the games SDK version.
 
  • Like
Reactions: Schweino, HS2005, AlphaBravo and 2 others
kevin corms said:
Bought a new digital ps5, it’s firmware 12.40. Looks like I’m good to go. Now I just need to figure out which is my best path forward.
Click to expand...
Follow this then when it’s time to send the elf file. Install WebKit autoloader by sending its elf

Then reboot and use that for the future

TheStonedModder

Tutorial  Post in thread 'PS5 Exploit Guide'

  1. In your PS5 network settings, set Primary DNS to 45.56.67.85 Settings > Network > Setup Internet Connection > Advanced Settings
1790670255143.png
1790670252127.png
2. Open Setting -> Guide & Tips, Health and Safety, and Other Information -> Under Guide and Tips -> click on User's Guide
1790670246389.png
3. Scroll bottom of the page and type this
tiny.cc/jx9b101 then click go
1790670239405.png
After a successful run, the ELF loader listens on port 9021. After elfldr starts on port 9021, you can press R2 to send kstuff.elf, shadowmountplus.elf, then etaHEN.elf...
  • Like
 
  • Like
Reactions: zebrone, schatzi24 and kevin corms
TheStonedModder said:
Follow this then when it’s time to send the elf file. Install WebKit autoloader by sending its elf

Then reboot and use that for the future

TheStonedModder

Tutorial  Post in thread 'PS5 Exploit Guide'

  1. In your PS5 network settings, set Primary DNS to 45.56.67.85 Settings > Network > Setup Internet Connection > Advanced Settings
1790670255143.png
1790670252127.png
2. Open Setting -> Guide & Tips, Health and Safety, and Other Information -> Under Guide and Tips -> click on User's Guide
1790670246389.png
3. Scroll bottom of the page and type this
tiny.cc/jx9b101 then click go
1790670239405.png
After a successful run, the ELF loader listens on port 9021. After elfldr starts on port 9021, you can press R2 to send kstuff.elf, shadowmountplus.elf, then etaHEN.elf...
  • Like
Click to expand...
sweet, wasnt sure if there was an autoloader for my firmware. Thanks! Hoping for offline support soon.
 
HS2005 said:
Tested Garlic Savemgr for 13.60 working.

View attachment 593153

Link: https://git.etawen.dev/earthonion/garlic-savemgr/releases/tag/v1.13.1
Click to expand...
Please help. I can't seem to load any elf files saved inot my etahen payloads folder except the ones which you load through R2 when jailbreaking. How did you manage to do this. I have a mac and getting an injector program on this crunt machine is an absolute crunt.
Post automatically merged:

TheStonedModder said:
Follow this then when it’s time to send the elf file. Install WebKit autoloader by sending its elf

Then reboot and use that for the future

TheStonedModder

Tutorial  Post in thread 'PS5 Exploit Guide'

  1. In your PS5 network settings, set Primary DNS to 45.56.67.85 Settings > Network > Setup Internet Connection > Advanced Settings
1790670255143.png
1790670252127.png
2. Open Setting -> Guide & Tips, Health and Safety, and Other Information -> Under Guide and Tips -> click on User's Guide
1790670246389.png
3. Scroll bottom of the page and type this
tiny.cc/jx9b101 then click go
1790670239405.png
After a successful run, the ELF loader listens on port 9021. After elfldr starts on port 9021, you can press R2 to send kstuff.elf, shadowmountplus.elf, then etaHEN.elf...
  • Like
Click to expand...
I can't seem to load any elf files saved inot my etahen payloads folder except the ones which you load through R2. Any advice would be appreciated. Trying to run cheats app. When I try to load cheats through etahen menu ALL games say cannot detect version.
 
TheStonedModder said:
Follow this then when it’s time to send the elf file. Install WebKit autoloader by sending its elf

Then reboot and use that for the future

TheStonedModder

Tutorial  Post in thread 'PS5 Exploit Guide'

  1. In your PS5 network settings, set Primary DNS to 45.56.67.85 Settings > Network > Setup Internet Connection > Advanced Settings
1790670255143.png
1790670252127.png
2. Open Setting -> Guide & Tips, Health and Safety, and Other Information -> Under Guide and Tips -> click on User's Guide
1790670246389.png
3. Scroll bottom of the page and type this
tiny.cc/jx9b101 then click go
1790670239405.png
After a successful run, the ELF loader listens on port 9021. After elfldr starts on port 9021, you can press R2 to send kstuff.elf, shadowmountplus.elf, then etaHEN.elf...
  • Like
Click to expand...

This morning was all successful. But now I want to try again and again this evening, but the message for R2 wouldn't show up now. Is there something changed or is the payload removed / bugged? Seems I can't get it to work anymore even after so many reboots.

Without being able to press R2 on the exploit I can install pkg, but not open homebrew aswell as the debug settings are totally different now.
 
So i've come into a interresting situation regarding loading certain games that i'd like to share. And also how I resolved the issue.

When loading the folder, exfat or ffpfsc games Resident Evil 9 Requiem and Pragmata on 13.60 i'm greeted with this error when starting the game. Error message: CE-107098-5

This means I constantly have to adjust the games settings over and over. Pretty dull. The game can be played however. It has something to do with the backport that is loaded. I did not had this specific issue / error message on 10.01 ~ 12.70.

It can be resolved by disabling the backport_fakelib. Not that I need it on 13.60, but that's not the point.

Solution:
  • In SM+ on the FTP go to the /data/shadowmount/ folder.
  • Adjust config.ini
  • Find: # backport_fakelib=1 > change to backport_fakelib=0.
  • Done.
This will be for all games. I tried making an exception by using this:

global_fakelib_exclude=PPSA31246
global_fakelib_exclude=PPSA02530

But it does not work. Feel free to add information.
 
  • Love
Reactions: AlphaBravo
MadonnaProject said:
Please help. I can't seem to load any elf files saved inot my etahen payloads folder except the ones which you load through R2 when jailbreaking. How did you manage to do this. I have a mac and getting an injector program on this crunt machine is an absolute crunt.
Click to expand...
Well if the elfldr-ps5.elf file is loaded when you have Jailbroken your PS5 you can send .elf files.
I use Netcat GUI 1.3.

Open the program. Set your PS5 IP. Set the port. It's 9021. Drop or select the payload and press [Inject Payload]
It looks like this:

1790716017621.png
 
HS2005 said:
Well if the elfldr-ps5.elf file is loaded when you have Jailbroken your PS5 you can send .elf files.
I use Netcat GUI 1.3.

Open the program. Set your PS5 IP. Set the port. It's 9021. Drop or select the payload and press [Inject Payload]
It looks like this:

View attachment 593173
Click to expand...
Thank you again but I am using macos.
 
Rasa39 said:
All games force you to use the latest system firmware whenever they go gold, but that doesn't mean they need that firmware.
In the param.sfo of your dumps, you can see the SDK and the Required firmware.

The first is the minimum firmware the game will actually run on, the latter is what the disc/digital copy would force you to install in order to play. Since they can be dumped on their required firmware, they can be played on their SDK firmware as a minimum.

Backports are only needed when the firmware you play on is lower than the games SDK version.
Click to expand...
Exactly. This for example:

1790716167469.png

Post automatically merged:

MadonnaProject said:
Thank you again but I am using macos.
Click to expand...
That's great and all but...

1. I hate everything IOS / Mac related.
2. Why wouldn't Netcat GUI work on Mac OS. > https://github.com/drtaru/netcatgui-mac/releases
3. Why don't you use https://github.com/Pharaoh2k/PlayStation-Payload-Center/releases and download the OSX version. If that does not work you can use: https://github.com/ItsBlurf/Blurfer/releases and you can also use https://github.com/duperin/payload-sender/releases

Example:

1790716614876.png
 
Last edited by HS2005,
HS2005 said:
Exactly. This for example:

View attachment 593176
Post automatically merged:


That's great and all but...

1. I hate everything IOS / Mac related.
2. Why wouldn't Netcat GUI work on Mac OS. > https://github.com/drtaru/netcatgui-mac/releases
3. Why don't you use https://github.com/Pharaoh2k/PlayStation-Payload-Center/releases and download the OSX version. If that does not work you can use: https://github.com/ItsBlurf/Blurfer/releases and you can also use https://github.com/duperin/payload-sender/releases
Click to expand...
I cannot agree with you more. All sorted thank you so much.
 

Site & Scene News

Go to forum More news

Popular threads in this forum