What other components near MN864729 on EDM-030

rickster26ter · May 23, 2026

I just repaired a lot on the hdmi on this ps5, and hdmi doesn’t display. Unfortunately, I just noticed a filter is missing - not done by me.

Does anybody know what the filter is, and if I might be able to get one from a ps3/switch?

I’m also trying to see if someone else might have any idea on what else is missing? Just put 100pf and 100nf on output of hdmi near two traces as it needed that.

Thank you so much!!

rickster26ter · May 23, 2026

The answer above is don’t replace, you might cutting off higher frequency since switch only goes to 1080p. Just short there on both signals. And nothing else is missing, works good.

thesjaakspoiler · May 26, 2026

The service manual for the EDM-010 and 020 just say 'common choke coil'.
No particular part number mentioned.
Even on Aliexpress no part number is mentioned.
https://ja.aliexpress.com/item/1005003561799823.html?gatewayAdapt=glo2jpn

Did you actually try using a Nintendo Switch choke coil?
I doubt that it would not work as a choke coil usually does nothing if there is no noise on that HDMI pair.
If your PS5 doesn't pick up much noise, then just bridging the pads will likely be no problem.
If you get 'no signal' issues then it might be worth installing one.

What other components near MN864729 on EDM-030

Active Member

Attachments

Active Member

Well-Known Member

Similar threads

Popular threads in this forum