Toggle sidebar

Homebrew Project Horizon OC Zeus (Beta / Release) - Best RAM overclocking tool - 3000MHz+

  • Thread starter Thread starter Souldbminer
  • Start date Start date
  • Views Views 4,780
  • Replies Replies 22
  • Likes Likes 7
Souldbminer

Souldbminer

Active Member
Newcomer
Level 2
Joined
May 27, 2025
Messages
29
Reaction score
44
Trophies
0
Age
23
XP
149
Country
United States
Horizon OC Zeus
Features:

Best RAM Overclock of any public OC tool
Good modules can easily hit 2800-3100MHz WITHOUT OVERVOLT (1175mV/640mV)

All other features of EOS/OCS/EOS2 (UV on Mariko, custom table, over/undervolt, vmin/vmax)
This is still in a testing phase! Keep a NAND and PRODINFO backup

This is also FREE and OPEN SOURCE
https://github.com/Horizon-OC/Horizon-OC

Here are some images and benchmarks
1771549440375.png

3100MHz on my AA. Unstable but a NEE can do this easily
1771549817648.png
1771549988069.png

3500MHz RAM clocks. This didnt last long due to SoC voltage, mitigation for this issue is coming soon.
Also some TOTK benchmark results, along with a video of the benchmark
1771549898243.png

RAM Benchmarks (old version, new version performance is even better)

Github (source code!) & Download:

Yet another totk benchmark, this time with WT:B
Overvoltage is to use very tight timings
1771550450856.png

60FPS in crash bandicoot
1771550486524.png

This is a very early test build against EOS, modern builds can get a lot more performance
1771550523142.png

2966MHz AA-MGCL Membench
 
Last edited by Souldbminer,
  • Like
Reactions: sexually_inactive, anon730, andreiarturo and 4 others
1771974882559.png

New feature!
Multiple overclocked ram frequencies for erista.
With the kip you can have up to three overclocked frequencies for erista, with timings adjusted accordingly
Also, timings for erista give a 66-100MHz frequency boost compared to EOS at virtually no performance loss (even at same frequency!)
With these changes some very good modules can likely run 2200+MHz at 1175mV!
 
Souldbminer said:
On mariko or erista?
On erista yes, on mariko its not possible without heavy patching of PCV
Click to expand...
On Mariko.

It wouldn't be of much use on Erista as the battery life on those is bad to begin with and underclocking the RAM won't get battery life up to Mariko standards.
 
I want to test it out. Is it fine to install it on top/over forked sys-clk provided with NX-Venom toolkit? I'm running firmware 20.3.0, Atmosphere 1.9.5 (Venom NX as mentioned) on Erista.
Just delete sys-clk, nro and config and replace it with your tool? Or this something entirely different, not related to sys-clk, or would mess up with something else, kips, etc.?
 
Souldbminer said:
I don't support installation over NX-Venom.
Dont use a back and set it up yourself, that is best
Click to expand...
OK, But it works as a replacement/alternative to original sys-clk? (which I've been using for OC for several years). Don't try to launch atmosphere with sys-clk and your toolkit as well? Can I delete Venom related stuff and just copy your files? Or you're saying installing over freshly formatted SD card with atm. is REALLY necessary?

Sorry for trivial questions, but over the years I found out it's really easy to fuck up something very bad, very easily. Not knowing what's the real problem, where only solution is to start fresh with formatted SD Card. And I really DON'T want to do this again, especially reinstalling over 500GB games, most of which I don't have XCI/NSP files anymore...
 
Souldbminer said:
- most of which I don't have XCI/NSP files anymore

piracy is not supported.
Click to expand...
Wow, thanks Einstein... Helpful indeed :bow:Only if this would be related to the topic whatsoever, nor that my mention isn't even remotely close to violating forum rules in any form...
 
OverRide said:
OK, But it works as a replacement/alternative to original sys-clk? (which I've been using for OC for several years). Don't try to launch atmosphere with sys-clk and your toolkit as well? Can I delete Venom related stuff and just copy your files? Or you're saying installing over freshly formatted SD card with atm. is REALLY necessary?

Sorry for trivial questions, but over the years I found out it's really easy to fuck up something very bad, very easily. Not knowing what's the real problem, where only solution is to start fresh with formatted SD Card. And I really DON'T want to do this again, especially reinstalling over 500GB games, most of which I don't have XCI/NSP files anymore...
Click to expand...
You're clearly the Einstein. If you learned anything over the years you wouldn't even be asking the questions that you're asking. Your questions are those of a noob. You act like someone that needs to be spoon fed. You also act like an entitled 💩🤡.
 
I'm running into a problem after trying to install. the overlays show up but when i click on hoc it says,

fatal error
hoc-clk is not running.
please make sure it is correclty installed and enabled.

any idea what im doing wrong?
 
YoureALoser said:
You're clearly the Einstein. If you learned anything over the years you wouldn't even be asking the questions that you're asking. Your questions are those of a noob. You act like someone that needs to be spoon fed. You also act like an entitled 💩🤡.
Click to expand...
username deserved.
 
As a recommendation, I use EOS-Pro and get better results.


https://github.com/NaGaa95/EOS-Pro/releases

EOS-Pro is far better than Horizon.

- Console: Nintendo Switch OLED (Mariko). Gold Grade Chip (Top 1-5% Silicon Lottery).

- Maximum Stable Portable Profile: CPU 1963 MHz (805mV), GPU 998 MHz (640mV), RAM 2400 MHz (1100mV VDD2)
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew  Full List of N64 Recompilation Switch ports

Feedback Homebrew  Essential Homebrew

Homebrew Tutorial Translation Project  CS2SX — Write Nintendo Switch Homebrew in C#

Homebrew Homebrew game Project  So... Dan didn't want to reveal his Vulkan, so I made mine.

Hacking  WiFi chip failing and can't boot. is it possible to enable Airplane Mode by editing system save files directly?

Homebrew  Sonic Unleashed Recompiled (Homebrew Port)

running 20.5 Is it worth upgrading my firmware...?

Is it fixable