Hello, having both V1 (Erista) and V2 (Mariko) with picofly. V1 been running picofly one month and today I installed picofly on V2 also. But they don't really work the same way.
My V1 glitches CPU in an instant, and boots to Hekate from power off (quick blue flash then green), and if I look in to "HW & Fuses info" Secure Boot key and Device key is "can't be read (locked out) after I boot to EMUMMC and do an reboot, again boots to Hekate in an instant. Also no blue and green flash from picofly at this stage. And then I have value under "Secure Boot key and Device Key.
But with the V2 (Mariko) at boot from power of I get 4-5 blue flash (4-5 sec) then green. Sometimes it's boots faster (1-2 flash) and sometimes slower (7-10 flash) then into Hekate. And same story here "can't be read (locked out) under Secure Boot key and Device key. But when I boot to EMUMMC and reboot picofly is glitching cpu again (flashing blue then green) and I won't boot to Hekate in an instant like on v1, it takes 4-8 sec. And I never get any value in "secure boot key and Device key" just says can't be read (locked out) all the time.
Is this normal for Mariko CPU ? Or is something bad ? Bad soldering? Bad picofly ?
I have tried to reset glitch learning setting but still the same,
And no difference in glitch time when SD card is out or in.
Same fw on both consoles
Picofly fw 2.74
21.2.0 AMS 1.10.2
It glitches every time but takes longer time then my V1.
My V1 glitches CPU in an instant, and boots to Hekate from power off (quick blue flash then green), and if I look in to "HW & Fuses info" Secure Boot key and Device key is "can't be read (locked out) after I boot to EMUMMC and do an reboot, again boots to Hekate in an instant. Also no blue and green flash from picofly at this stage. And then I have value under "Secure Boot key and Device Key.
But with the V2 (Mariko) at boot from power of I get 4-5 blue flash (4-5 sec) then green. Sometimes it's boots faster (1-2 flash) and sometimes slower (7-10 flash) then into Hekate. And same story here "can't be read (locked out) under Secure Boot key and Device key. But when I boot to EMUMMC and reboot picofly is glitching cpu again (flashing blue then green) and I won't boot to Hekate in an instant like on v1, it takes 4-8 sec. And I never get any value in "secure boot key and Device key" just says can't be read (locked out) all the time.
Is this normal for Mariko CPU ? Or is something bad ? Bad soldering? Bad picofly ?
I have tried to reset glitch learning setting but still the same,
And no difference in glitch time when SD card is out or in.
Same fw on both consoles
Picofly fw 2.74
21.2.0 AMS 1.10.2
It glitches every time but takes longer time then my V1.
