Have problem with mod. Using 0.02 wire for all point

Hardware
  • Index
    • Pait

    Pait

    New Member
    OP
    Newbie
    Level 1
    Joined
    Apr 21, 2024
    Messages
    1
    Trophies
    0
    Age
    43
    XP
    13
    Country
    Malaysia
    Hi guys im modding my nintendo switch OLED for the first time. soldered everything but the first error i got is

    ==* CPU always reach BCT check (no glitch reaction, checkmosfet)

    i pretty confident with my soldering skill

    This is the picture of the mosfet soldering

    1713711761854.png
    1713711793126.png


    After changing my to new mosfet. the error still persist and i spray they board with pcb cleaner multiple times.. resolder some broken link because of the thin wire.. slight movement might cause it to break.

    i got into this error.

    CMD not connected. after further inspection i guess the cmd resistor was broken. i replaced it to another resistor which is bigger in size but same value.. i also soldered 0.02mm to connect the connection but the error still persist.

    Do you guess think my wire is too thin ? is there anyone sucessfull modded the switch using my 0.02mm.

    Please advice i dont know what to do anymore.

    Please also advice what is the value of diode mode for each pin.

    Value of diode mode of before the point is connected to picofly

    Dat0 = 0.774v
    CLK = 0.785v

    this is my value after installed all point on diode mode

    RST 1.259v
    CLK 0.783v
    CMD 0.774v
    DAT0 0.781v
    PWR 0.838v
    GND 0v

    is there any abnormalities here ?

    If some one please share with me there working value of the diode and also the voltage value when its turning on. this also might help greatly for me to pinpoint which part is bad.

    This is my kamikaze dat0 picture, maybe i did mistake here

    1713712654736.png
     
    Last edited by Pait,
    Viktorsilva

    Viktorsilva

    Well-Known Member
    Newcomer
    Level 3
    Joined
    May 6, 2020
    Messages
    86
    Trophies
    0
    Age
    44
    XP
    250
    Country
    Portugal
    Ver fotografias recentes (1).jpeg


    I dont know why people still insist to use 2 mosfets connection. Done more then 100 consoles with this installation method and i can ensure you that it works with instant boots. Make sure to use at least 30 awg on CLK (CPU sends high Pulse), GRD and Power. All the rest can be connected with those magnetic thin wire. If you search a bit more you will find that 1 mosfet works like a charm. Congratullations for your Kamikaze mod, well done. Dont forget to mask all the copper exposed.
     

    Site & Scene News

    Go to forum More news

    Popular threads in this forum

    Paper Mario TTYD 60fps patch?

    Paper Mario Thousand Year Door got leaked

    Hacking Misc Tutorial  Eiyuden Chronicle Hundred Heroes save editing

    TTYD patch for AMD black screen sewer issue?

    Tutorial  How to play Pokerogue on Nintendo Switch

    Help a noob with if I need to update CFW to 18.0 or not

    Is there any point upgrading to 18.0?

    Paper Mario TTYD Resolution Patch?

    General chit-chat
    Help Users
    • K3Nv2 @ K3Nv2:
      So they buy a pi5 kit for about $150 and say a 28" 4k display probably looking around $400 total
    • K3Nv2 @ K3Nv2:
      They'll be getting in the territory of portable Pcs anyway
       +1
    • BigOnYa @ BigOnYa:
      Again you get what you pay for, its like buying a S series for $300 but its only 1440p native, if you want true 4k, gotta get the X model for $500. But yea you right, when moms buying it anyways, you gotta stay cheap.
    • K3Nv2 @ K3Nv2:
      They could use HD out on their TV no real need for a monitor these days tbh the purists will disagree
    • K3Nv2 @ K3Nv2:
      I'm kind of phasing out on the need for wanting all these consoles cool to have but they just become dust build ups
    • BigOnYa @ BigOnYa:
      I here ya there, I have too many myself, and have hard time letting them go, since most of mine I've modded at some point. Anymore I just play Switch on the go, seriesx at home.
    • Xdqwerty @ Xdqwerty:
      ack my throat
    • K3Nv2 @ K3Nv2:
      I need to invest in some storage totes tbh
    • BigOnYa @ BigOnYa:
      Tots?
    • K3Nv2 @ K3Nv2:
      Tootles
    • BigOnYa @ BigOnYa:
      Tootles? Wtf
    • K3Nv2 @ K3Nv2:
      Oh tootles
    • BigOnYa @ BigOnYa:
      Oh totes , lol, like Tupperware storage, I gotcha
    • BigOnYa @ BigOnYa:
      I'm designing my own entertainment cabinet for my man cave, to store all my systems, then I'm also designing a power supply/HDMI switcher so I can switch to whichever system I want, and power it also. Already picked up the cabinet board, but tinkering with my drawings before start
    • BigOnYa @ BigOnYa:
      But yea, I have frogger arcade cabinet that I gutted and put a Pi4 then Pi5 into, but it never gets played much anymore, should sell it. Even when the kids come over, they don't want to play on it, just the xbox. TMNT and Simpson's arcade is still so fun on it, esp w 2 players.
    • K3Nv2 @ K3Nv2:
      Gonna check out the new Garfield looks like garbage
    • BigOnYa @ BigOnYa:
      Can't wait to see the new "stick" that can actually play Ps3 or 360 games. I know they are getting close.
    • BigOnYa @ BigOnYa:
      @Xdqwerty didn't you see the new garfield?
    • K3Nv2 @ K3Nv2:
      Ah it's all animated I was hoping for some live action
       +1
    • Xdqwerty @ Xdqwerty:
      @BigOnYa, yes i did
    • T @ TheSusKing:
      does anyone know if you can run android apps on a usb
    • K3Nv2 @ K3Nv2:
      You mean use a external usb thumb drive as storage? Yeah it depends on the phone
    • T @ TheSusKing:
      no, i mean if i could store the app on the usb so it doesnt take up my storage
    • K3Nv2 @ K3Nv2:
      By changing the apps location https://www.croma.com/unboxed/how-to-move-android-apps-from-internal-storage-to-an-sd-card
    • Xdqwerty @ Xdqwerty:
      @BigOnYa, why do you ask?
      Xdqwerty @ Xdqwerty: @BigOnYa, why do you ask?