Hardware GBA Damaged GBA, what to salvage?

ee_sndln

New Member
OP
Newbie
Joined
Mar 29, 2023
Messages
2
Trophies
0
Age
30
XP
28
Country
United States
Hi all,
I recently purchased some damaged GBAs with the intent to repair them and learn a bit in the process. So far I've got most working but a few have heavily damaged motherboards, and I would like to salvage what I can from those. Here's my question- are there any unique parts I should be grabbing? Of course I'll be lifting the CPU and RAM; I'm wondering about the other ICs on the board, or if there are any custom sized components...? I'll be using a hot air station so removing them shouldn't be too tricky.
Thanks in advance for any input!
 

JuanMena

90's Kid, Old Skull Gamer & Artist
Member
Joined
Dec 17, 2019
Messages
4,900
Trophies
2
Age
30
Location
the 90's 💙
XP
10,163
Country
Mexico
Hi all,
I recently purchased some damaged GBAs with the intent to repair them and learn a bit in the process. So far I've got most working but a few have heavily damaged motherboards, and I would like to salvage what I can from those. Here's my question- are there any unique parts I should be grabbing? Of course I'll be lifting the CPU and RAM; I'm wondering about the other ICs on the board, or if there are any custom sized components...? I'll be using a hot air station so removing them shouldn't be too tricky.
Thanks in advance for any input!
I'm afraid the only parts you could savage, besides the ones you mentioned, are the crystal oscilator, I'm afraid there's a capacitor, and probably the audio jack, volume potentiometer, probably the on/off switch might come handy too.
About the screen, probably the most useful one is the polarizer, but good luck removing it without damaging it.
 
  • Like
Reactions: ee_sndln

FAST6191

Techromancer
Editorial Team
Joined
Nov 21, 2005
Messages
36,798
Trophies
3
XP
28,348
Country
United Kingdom
Classically. Not really. Most things were screens and buttons/plastics, maybe cart slots. The DS (which shared some components) had the EM10/EM8 inductor I think it was fail consistently enough to be notable in this.

We did recently see a clock crystal go (my first despite all these years here) and I would consider that somewhat emblematic of where we are at as we will be seeing the weird and wonderful break as we are however long on now and old electronics is no fun*.

Re CPU and RAM I don't know how useful/saleable they will be, though I would be the first to point at my previous paragraph and maybe someone will toast one with some of the overclocking people are getting into (whether you go as far as binning the RAM to see if it performs better in that scenario I leave to you). Likewise we are past the days of a new GBA being £5 at any car boot sale, yard sale, flea market, charity shop or junk shop you care to visit wherein it was mostly the nerd that could fix things that did fix things.
Most passives are potentially cooked themselves and likely have smaller versions out there today (though oversized was an issue with the clock crystal replacement, and I have had similar issues with capacitors over the years in things, though that was more because some designer either paid the serious price for something back when, pushed it harder than is ideal or... they called the capacitor plague for a reason).
External ports, and connectors are usually a fun one. Volume wheels can be tricky to both desolder and sell on as anything other than sold as seen -- they are still essentially a decades old consumer grade (none of that nice silver wear path stuff here) variable resistor with all that it entails, some mad people have managed to pull them apart and clean out).

*not particularly relevant to the GBA but a nice overview of some things you encounter in these sorts of fields


You may also enjoy
https://github.com/Zekfoo/AGZ
Reverse engineered PCB that if the PCB itself is damaged (though I question how damaged is damaged if components are worth salvaging, we have seen several die from salt water, being stored in what I can only imagine was a 100% humidity jungle and leaky batteries though).
 
  • Like
Reactions: ee_sndln

ee_sndln

New Member
OP
Newbie
Joined
Mar 29, 2023
Messages
2
Trophies
0
Age
30
XP
28
Country
United States
I'm afraid the only parts you could savage, besides the ones you mentioned, are the crystal oscilator, I'm afraid there's a capacitor, and probably the audio jack, volume potentiometer, probably the on/off switch might come handy too.
About the screen, probably the most useful one is the polarizer, but good luck removing it without damaging it.
You may also enjoy
Reverse engineered PCB that if the PCB itself is damaged (though I question how damaged is damaged if components are worth salvaging, we have seen several die from salt water, being stored in what I can only imagine was a 100% humidity jungle and leaky batteries though).
Thanks for the info! 2 of the PCBs look water damaged so I have doubts about what's worth saving :unsure: but I'm willing to give them one last shot before they head to the trash. Unfortunately all 3 I'm salvaging failed in the same area (severely leaky batteries?) so I'm out of luck re: power switch and related components. I'll focus on the CPU/RAM/oscillators, if I can get a working CPU/RAM pair maybe I will look into a replacement PCB for fun...
I got these in a junk/for-parts listing so anything is a happy surprise!
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • Veho @ Veho:
    Nah, a hit gives them mad meth powers, but makes them more difficult to control.
    +1
  • Veho @ Veho:
    Before a hit they're like zombies, persistent but slow.
    +1
  • Veho @ Veho:
    It's a tradeoff.
    +1
  • The Real Jdbye @ The Real Jdbye:
    no i mean, before a hit is after the previous hit
    +1
  • The Real Jdbye @ The Real Jdbye:
    if you keep them well enough fed, it's the same thing
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    By the power of Florida Man, I have the power!!! *Lifts up meth pipe* Meth Man!!! lol
  • BakerMan @ BakerMan:
    Guys, I just learned my little brother is in the hospital because he had a seizure last night.
  • cearp @ cearp:
    Sorry to hear that BakerMan
    +2
  • BakerMan @ BakerMan:
    Just found out he's doing alright, doing a lot of complaining too, rightfully so. Who wouldn't complain after having a seizure and being hospitalized?
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    Glad he is OK and complaining is cool :)
    +1
  • K3Nv2 @ K3Nv2:
    Yeah been there had that no fun
    +1
  • K3Nv2 @ K3Nv2:
    They'll give him sleep studies eegs and possibly one week hospital stay
    +1
  • BakerMan @ BakerMan:
    I hope it's not a week.
  • K3Nv2 @ K3Nv2:
    It's standard so doctors can get a idea about what's going on
  • BakerMan @ BakerMan:
    understood
  • BakerMan @ BakerMan:
    well, i'm glad he seems to be doing fine, and ig i'm going to start spewing goofy shit again
  • BakerMan @ BakerMan:
    Update: Turns out he's epileptic
  • K3Nv2 @ K3Nv2:
    Get a 2nd opinion run mris etc they told me that also
  • Psionic Roshambo @ Psionic Roshambo:
    Also a food allergy study would be a good idea
  • K3Nv2 @ K3Nv2:
    Turns out you can't sprinkle methamphetamine on McDonald's French fries
  • ZeroT21 @ ZeroT21:
    they wouldn't be called french fries at that point
  • ZeroT21 @ ZeroT21:
    Probably just meth fries
  • K3Nv2 @ K3Nv2:
    White fries hold up
    K3Nv2 @ K3Nv2: White fries hold up