Hacking Atmosphere-NX - Custom Firmware in development by SciresM

[ApoQ]

Testing Atmos 0.20.0 and it breaks Awoo Installer compatibility (Tinwoo too)
Touch screen and buttons not working

 

[BaamAlex]

Touch screen and buttons not working :-

Thats definitely not an atmosphere issue...

 

[FanNintendo]

Answer is four posts above yours. Do you bother with reading at all?

must have missed the post

 

[petspeed]

Afaik you can even setup 90DNS with the DNS service that Atmosphere provides, without having to screw around with your DNS settings in your router.

Here's how to do so:
https://gist.github.com/dimaskiddo/bb803c5e008002214f9da917cfd1485f

And here's an example file already created:
https://nh-server.github.io/switch-guide/files/emummc.txt

I recommend combining both the one in the GitHub Gist and the file I linked as well.
The one in the Gist seems to be missing

127.0.0.1 *nintendo.pl

just below the .ch link.
With that one, and the explanation/setup in the Gist, you should properly have 90DNS setup in your Switch with Atmosphere.

Yeah that's exacly what I meant. Then you are protected on all networks. And if you rename the emummc.txt file to default.txt then you are also protected if you by mistake boot SysMMC with CFW.

 

[Metro City]

You need to disable the setting and not enable it, as you're now saying that "no game cart is true". It might be a bit confusing at first as it's a double negative.

You might have to add the setting in atmosphere as well -- in that case, you can copy BCT.ini from ./atmosphere/config_templates to ./atmosphere/config, and then add nogc = 0 to it. I'm not certain this is needed though

Ok thanks, I did a clean fresh install by putting:
atmosphere-0.20.0-master-1f065e3b+hbl-2.4.1+hbmenu-3.4.1.zip
Supports HOS firmware 12.1.0 and AMS 0.20.0
But i can't play any game card ?_?

 

[Snomannen_kalle]

Ok thanks, I did a clean fresh install by putting:
atmosphere-0.20.0-master-1f065e3b+hbl-2.4.1+hbmenu-3.4.1.zip
Supports HOS firmware 12.1.0 and AMS 0.20.0
But i can't play any game card ?_?

Did you remember to add the nogc = 0 to BCT.ini and place it in ./atmosphere/configs, as well as adding autonogc = 0 in hekate_ipl.ini after you did the clean install?

 

[Metro City]

Did you remember to add the nogc = 0 to BCT.ini and place it in ./atmosphere/configs, as well as adding autonogc = 0 in hekate_ipl.ini after you did the clean install?

So in BTC.ini

BCT0
nogc = 0

[stage1]
stage2_path = atmosphere/fusee-secondary.bin
stage2_mtc_path = atmosphere/fusee-mtc.bin
stage2_addr = 0xF0000000
stage2_entrypoint = 0xF0000000

[stratosphere]
; To force-enable nogc, add nogc = 1
; To force-disable nogc, add nogc = 0

; To opt out of using Atmosphere's NCM reimplementation, add disable_ncm = 1


in bootloader: patches.ini and hekate_ipl.ini

[config]
autoboot=0
autoboot_list=0
autohosoff=1
autonogc=0
backlight=100
bootwait=3
updater2p=0

[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
icon=bootloader/res/icon_payload.bmp

[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/fusee-secondary.bin
icon=bootloader/res/icon_payload.bmp

[Stock]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
icon=bootloader/res/icon_switch.bmp
stock=1

[Fusee]
icon=bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee-primary.bin

Correct? Thanks

 

[Snomannen_kalle]

So in BTC.ini

BCT0
nogc = 0

[stage1]
stage2_path = atmosphere/fusee-secondary.bin
stage2_mtc_path = atmosphere/fusee-mtc.bin
stage2_addr = 0xF0000000
stage2_entrypoint = 0xF0000000

[stratosphere]
; To force-enable nogc, add nogc = 1
; To force-disable nogc, add nogc = 0

; To opt out of using Atmosphere's NCM reimplementation, add disable_ncm = 1


in bootloader: patches.ini and hekate_ipl.ini

[config]
autoboot=0
autoboot_list=0
autohosoff=1
autonogc=0
backlight=100
bootwait=3
updater2p=0

[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
icon=bootloader/res/icon_payload.bmp

[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/fusee-secondary.bin
icon=bootloader/res/icon_payload.bmp

[Stock]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
icon=bootloader/res/icon_switch.bmp
stock=1

[Fusee]
icon=bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee-primary.bin

Correct? Thanks

That should probably suffice, although personally I'd add nogc = 0 under [stratosphere] in BCT.ini (not sure if it needs to be there or if it should be OK to have it at the top)

 

[SciresM]

Happy June 15th!

 

[Starhatred]

Hey... guys. I got this error while copying Atmosphere to SD card.

Can someone show me how to fix it? I've never had this error before, and I'm also bad at computer. Thank you very much!

 

[Hayato213]

Hey... guys. I got this error while copying Atmosphere to SD card.
View attachment 274394
Can someone show me how to fix it? I've never had this error before, and I'm also bad at computer. Thank you very much!

It says files doesn't exist, check your files.

 

[impeeza]

what about signature patches for atmosphere 0.20.0 ?

Response exactly 2 messages above

--------------------- MERGED ---------------------------

Hey... guys. I got this error while copying Atmosphere to SD card.
View attachment 274394
Can someone show me how to fix it? I've never had this error before, and I'm also bad at computer. Thank you very much!

try to extract the zip file before copying to SD

--------------------- MERGED ---------------------------

Happy June 15th!

Ha ha ha, only a .001 MHz can make a lot, just a bit, best luck my friend.

 

[Starhatred]

It says files doesn't exist, check your files.

try to extract the zip file before copying to SD

Thank for your replies. I checked it, that file exists. I tried re-downloading the new zip file, unzipped and copied it to the SD card, but still the same error.
Another strange thing is that it only happens when copying folders in turn, or when copying in clusters but the "atmosphere" folder is copied first. If copying in clusters and the "switch" folder is copied first, this error does not occur.

 

[naddel81]

after updating to the newest atmosphere, I get

"Fatal error: [MTC]: Failed to find timing table!"

when booting fusee-primary.bin. I can press power and boot just fine after that. what does this mean? how do I fix this?

 

[BaamAlex]

after updating to the newest atmosphere, I get

"Fatal error: [MTC]: Failed to find timing table!"

when booting fusee-primary.bin. I can press power and boot just fine after that. what does this mean? how do I fix this?

Did you update the fusee-primary.bin?

 

[naddel81]

Did you update the fusee-primary.bin?

Yes. Booted via hekate.

EDIT: actually, no. I did update atmosphere and assumed fusee-primary was included. it was NOT. so thanks for the hint. fixed the error.

 

[BaamAlex]

it was NOT

The fusee-primary is never included. SciresM uploads it separately.

 

[impeeza]

and you manually has to update your payload injector

 

[hippy dave]

Happy June 15th! Congrats @SciresM on the huge milestone

 

[impeeza]

Happy June 15th the number one!! (Pre)